4Kam Air HDs Pro HD User manual
Air HDs Pro HD
4kam Air Diagram
Rear cap screws on in
a clockwise motion
Specifications:
Pixels 10 mega
Resolution 1920x1080P@30fps ; 1280x720P@60fps
Power supply Embedded Li-polymer Battery
Power duration About 1 - 1.5 hours
Power Consumption <1.5W
Memory Support Max high speed 32 GB TF Card
Photographing Angle 110 - 135 degree
Video Format H.264
Working temp -10–50
Storage temp -20-60
Waterproof depth 10 meters
Laser beam Yes
Physical weight 38g
USB 2.0HS
Player KM Player;Quick Time7.6;Storm2012;RealPlayer11
Operating System Win7/WinXP/Vista/Mac Os10.7 or above
Technical Specifications
1.Sensor resolution 10 Mega pixels CMOS.
2.Support Micro SD/SDHC Class 4 card or above and compatible up to 32GB.
3.Movie storage
1080P=1920×1080p (16:9).30fps,12 Mbit/s data rate,1G Byte memory can record for 10 minutes.
720p=1280x720 pixels (16:9), 60fps, ~12 Mbit/s data rate, 12 minutes of video per 1G Byte.
4.The recording duration will be varied which depends on the recording objects and environment.
5.Focusing range: 3m~infinity.
Computer System Requirements
Minimum System Requirements
·Windows Environment: 3.0 Ghz Intel Pentium D(dual-core) or faster.
·Mac Environment: Dual 2.0 Ghz PowerMac G5 or faster; 2.0 GHz Intel Core Duo or faster.
·Windows XP (Service Pack 2 or later),Windows Vista, Windows7 or Apple Mac X 10.6 or above.
·2GB RAM.
·1G Free hard disk space.
·1GB or greater video card.
·Quicktime 7.
·1024x768 resolution video support(32 bit).
·16 bit Windows compatible sound device.
(In some cases, the frame rate may be automatically reduced to maximize the memory usage)
Camera Operation
Recording videos
1. Aim at what you want to record.
2. Press the ON/OFF button for 2 sec. to power on into standby mode, green led light .again press on/off button,start
recording. illuminate the blue LED and automatically start recording, the blue LED will flash .
3. The Laser pointer at the front of the camera will turn on for a more accurate adjustment of the target . The laser will stay
on for 10 sec. During recording, users can short press the ON/OFF button to turn on/off the laser pointer.
(Do Not look directly to the Laser Point or aim at other's eyes.)
4. Power Off: Press the ON/OFF button for 2 sec. and release.
Camera settings
1. Connect camera to PC
2. Find the setting.txt document under the new disk found
3. Change the UPDATE: Y to N to make the changes going into effect. The default is 1.
Function 0 1 2 3 Default
EV 6 0-12 Adjustable
AWB Auto Daylight Cloudy Fluorescent auto
CTST 100 1-200 Adjustable
SAT 100 1-200 Adjustable
SHARPNESS 100 1-200 Adjustable
QUALITY High Middle Low Middle
Audio Enable Max Mid Low Middle
LIGHT FREQ 60 50 50
RTC Display OFF ON ON
LaserLed OFF ON ON
SensorRotateEnable OFF ON OFF
VideoSwitch 1080P 720P 1080P
NOTE: Users can choose 50HZ or 60HZ by this setting to avoid flickering in the video while shooting indoors, you need to
adjust this setting to match the frequency of light source.
LED Indicator
Function Green LED Blue LED Red LED Laser Pointer
Power on Stay on Stay on for 5 sec. Off Quick flash for 10 times
Power off Stay on for
1 sec. & go
off
Stay on for 1 sec. &
go off Off Quick flash for 5 sec.
Recording Stay on Flashes 1 time per 1
sec. Off Stay on for 3 times. & go off
Without TF card
or card is full Quick flash
for 10
times
Flash for 10 times. Off Stay on for 5 times. & Standby
Low battery Flash for 5
sec. Flash for 5 sec. Off Stay on for 5 sec. & go off
Charging Stay on Off On Off
Fully charged Stay on Off Off Off
Time Setting
1.Connect the device with PC, you need to create a file named settime.txt under the SD memory card
2. Open the new Text document, input the local true time according to the following set form. For example: The present
Beijing time is: 06:09:01,8th,Jul,2015,So we input like this:2015 07 08 06 09 01(space needed between each number)
after finished save the file and exit.
3.Press "Power On" then the camera start recording, when connect with PC, the time shown onthe video should be correct.
Charge the camera
Recharge the battery via USB Cable
1.Turn the camera off, then plug the camera with the rechargeable battery to a computer with the USB cable provided
2.The blue LED will light up to show the battery is charging.
3.The blue LED will be turned off when the battery is fully charged.
The rechargeable battery can working nearly 90-100 Minutes under the 1080P@30FPS or 720p@60fps, it will take 2
hours when fully charged.
NOTE
- Ensure the SD card is inserted correctly
- Do not touch the connect terminals on the back of the microSD card
- The card may be damaged if it is not fully inserted
- The card and the data may be damaged if the microSD card is inserted or removed while the camera is on
- The camera supports microSD/SDHC Class 4 cards or above and compatible up to 32GBMicroSD cards with lower
classes may cause performance drop during recording.
Connecting to a Computer
You can upload your recorded video footage and photos on a computer when enabled the computer and camera.
1.Turn the camera on.
2.Connect your camera to a computer using the USB cable.
3.It will show the removable disk when connected successfully.
4.Using the computer software to process the video and photo.
Camera Precautions
Please read below instructions when you use this camera
- Do not leave the camera in places exposed to extremely high temperatures , such as direct sunlight for extended periods
of time. This may affect the camera housing and internal components.
- Please clean the lens with a soft cloth to remove fingerprints or dust.
- If the rechargeable battery is mishandled, it can burst, cause a fire or even chemical burns. Please note the following:
Do not disassemble.
Do not crush and expose the rechargeable battery to any shock or force such as hammering, dropping or stepping on it.
- Before remove the SD card, please turn off the camera at first, or it may cause damage of the files or SD card.
- Remove the SD card before storing the camera for long periods of time. Keep it in a well-ventilated place.
Table of contents
