A/DA Walost User manual

Walost Wall Shelf

Dear Customer,
We design and produce our products for
people to love and have fun with them as
we do.
The product you bought was subjected to
all sorts of tests and control before sending
out to you.
Although all the products are produced
and packed carefully,sometimes happen
that some component is damaged during
the transportation. In such a case please
check the missing or damaged part and do
not hesitate to contact us.
Before start assembling, please clean all the
components with a damp cloth.
Also for usual cleaning, this will be enough.
Before start assembling, please check the
whole components and accessories
according to the lists. If you bought more
than one product, to prevent confusion be
sure that you completed the first product.
Then start the other product's assembling.
Do not use your furniture for out of purposes.
If you would like to use it, please contact us
for further questions.
Do not directly contact your furniture with
excessive heat, cold and humidity because
the product can be affected..
1

This module should be assembled by two people.
18mm
A06
4 sw
A12
1x
50 mm
A13
8x 16x
3,5x30
A11
4x
20 mm
B04
A10
4x
-L-
A15
4x
Ø8
A16
4x
4x50
A17
3,5x18
A18
4x
ACCESSORY LIST
GENERAL VIEW
C1: 6x
C2: 4x
01
01
04
04
05
05
05
05
06
06
03
03
02
1048-21019102
2

A13
03
01
03
01
1
3

2
02
03
3
03
02
4

4
01
03
5
04
05
05
05
04
A11
xy
x>y
5

06
05
05
06
05
A11
6
BLOCK
A
x2
6

7
Rotate
BLOCK
A
7

8
B04
B04
Rotate
8

9
Rotate
BLOCK
A
9

10
B04
B04
10

11
Wall
STEP-1
A16 A15
A17
STEP-2
11
27,55 inches 15,74 inches
27,55 inches
15,74 inches
21,1 inches

12
A15
A18
12

13

14

• This unit contains small parts which could be a choking hazard for small children.
Children should be under adult supervision at all ?mes.
• Do not overload the unit. Each shelf has a recommended capacity of 13 pounds, and the
total weight on the unit should not exceed 39 pounds for wall shelves.
• Do not climb, step, or stand on the unit.
• Do not mount or a?ach items to the front, rear, or sides of the unit. This can cause the
unit to become unbalanced and fall.
• Do not stack units.
• All units must be secured individually to wall studs using hardware provided. If wall
studs are not accessible, consult your local hardware store for appropriate mountaing
hardware.
• We recommend you hand-?ghten screws. Use care not to over?ghten if using power
tools. Follow proper safety procedures if using power tools and/or ladders.
• We recommend you protect your work surface during assembly to prevent scratching or
damage to tabletops, wood floors, etc.
• Failure to follow the instruc?ons listed here could result in bodily injury or damage to
personal belongings. Use cau?on and follow safety procedures.
1048-21019102
15