A-Star PD-8800 Assembly instructions

Preparation before playing:
STEP 1 - Press POWER to
turn on the player. The Astar
DVD Logo appears on the
DVD screen.
STEP 3 -
Press the PLAY button on
the front panel or remote control.
Then playback will begin.
STEP 2 - Push OPEN on the front panel .
When the tray is opened, place the disc on
the tray with the label side up. Manually
close the tray.
-9-

SYSTEM SETUP
SCREEN SAVER
PASSWORD
RATING
DEFAULT
EXIT SETUP
The Setup Menu System Advanced Features
1.General Steps of Setup Menu
a) Press the Setup button,the main setup menu appears.
SCREEN SAVER
PASSWORD
RATING
DEFAULT
EXIT SETUP
SYSTEM SETUP
2.Setup Items Introduction
2.1 SYSTEM SETUP
a)SYSTEM SETUP
Select"Screen Saver" in the system setup to turn on or off the screen saver.
SYSTEM SETUP
ON
OFF
SCREEN SAVER
PASSWORD
RATING
DEFAULT
EXIT SETUP
b) PASSWORD
By default the password option is locked.In order for the Ratings feature to work, the
password mode must be enabled. If you want to set the ratings limit , you will need to
enter the default password which is 0000,then press Enter to confirm .To change the
password ,you will be prompted for the old password ,then be prompted for a new .
Enter a 4-gigit number (this is your password) .Please remember your PASSWORD ,
as the DEFAULT setting will revert everything But the PASSWORD to the factory defaults.
The default password setting is 0000.
-10-