AAXA Technologies P2-A User manual

aaxa
TECHNOLOGIES
User Guide

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving.
DO NOT expose to water or wet
surfaces. Electric shock may occur.
DO NOT expose the projected LED
image to your eyes or the eyes of
others.
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat.
Keep the projector and charger away from
any heat sources.
Caution for Headphone Use
• Prolonged use at high volume may
impair your hearing.
• High volume during walking or driving
may cause distractions and result in
injury or death.

Table of Contents
Chapter 1: At a Glance
P2-A Introduction
Remote & Keypad
Accessories
Chapter 2: Getting Started
Connecting to WiFi
Focus Adjustment / Throw Distance
External Inputs/Outputs
Navigating the Main Menu
Loading External Content
Videos Menu
Photos Menu
Connecting to a Digital Input
Connecting to Composite Video
Browser
Streaming Applications
Connecting to a BT Device
Apps
Smartphone Mirroring
Ofce
Chapter 4: Settings Menu
Application Manager
Networks Settings
Bluetooth Settings
System Settings
Backup & Reset
Projector Settings
About
Language
Chapter 5: Technical Details
Troubleshooting
Specications
Notes
1
1
2
4
5
6
8
9
10
12
16
20
22
25
27
28
30
33
34
37
41
42
43
44
45
46
47
48
49
50
50
52
53

P2-A at a Glance Chapter 1
Digital Input
USB Port
Main Unit Front/Back
Power Button
AV Port
Headphone Out Power Port
1
Focus Adjustment
Touchpad
TF Card Slot

Remote & Keypad
2
NOTE: Pressing power on the remote once will only enable or disable the remote control. In
order to fully turn the projector off , hold the power button down on the remote or projector for at
least 3 seconds.
Power On/Off Select Source
Navigation
Volume Up
Volume Down
Remote
Back
Mute
Main Menu
Video Play Menu
* P2-A does NOT support keystone feature.

Remote & Keypad Cont.
The P2-A incorporates a capacitive touchpad directly onto the top of the projector. This touch-
pad works in conjunction with a pointer and allows users to select icons, APKs, and scroll
through the menu system. Like most notebook touchpads, the touchpad can be double-tapped
for a click or used in conjunction with the Enter and Back buttons below the touchpad.
3
OK

Accessories
4
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Additional accessories are available for purchase at www.aaxatech.com
Tripod Remote
Power Adapter A/V Cable

Getting Started
1. Connect the power cord to the P2-A.
2. Connect the other end of the power cord into the wall power source.
3. Hold the power button for 3 seconds to start the projector.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. To turn off the projector, hold the power button for 3 seconds. This will fully turn
off the projector.
1. The P2-A needs to be plugged in and charged for four hours before operation.
Plugging In the projector
Connecting to WiFi
1. View page 6 for details.

Connecting to WiFi
6
Please see next page for steps to establish to a WiFi connection.
Connecting to WiFi:
• Select the “Settings” icon (Fig. 2.1).
• Select the “Network Settings” option and navigate to your WiFi network and
click on it to connect.
• A window will appear and ask for a password, please type it in. When nished,
press “Connect” and the projector will connect to your WiFi (Fig. 2.2).
Fig. 2.1 Fig. 2.2

Connecting to WiFi FAQ
7
Connecting to WiFi:
P2-A features a WiFi chipset capable of 802.11 b/g/n connection. This means
it is compatible with most WiFi routers. To connect to a WiFi router, follow the
following steps:
Step 1: Access the Network Settings Submenu: Settings -> Network
Settings
Step 2: Turn WiFi radio to “On” by highlighting and toggling the WiFi
Button under WiFi settings
Step 3: Select the appropriate Router
Step 4: Enter the router password in the password selection (by
pressing “OK”). It is recommended that the automatic IP
address acquisition be turned on
Troubleshooting
1. Unable to connect
a. Check Security Settings – WPA/WPA2 PSK
b. Check if Router is in range