Abestorm NeatyFresh Max User manual

User’s Manual
Add: 8605 SANTA MONlCA BLVD#79525
WEST HOLLYWOOD,California,90069 USA
E-mail: [e-mail]
Note: as we keep upgrading our product, we reserve the right to modify the product without notice in advance.
NeatyFresh Max
Abestorm
C

Abestorm Crawl Space NeatyFresh Max allows for the free circulation of air in the porch and
under the house. High moisture levels in the crawl spaces can lead to the decay and rot of wooden
pillars that support the house, floor, joists, and beam pillars. Also, high humidity causes an
increase in termite activity and growth of fungi. Rust, which causes corrosion and leaks in metallic
pipes, is also factored by the level of moisture in your crawl space. With our ventilation fan, radon
gas from treated wood is expelled away. This gas, together with other odors, can easily spread
into the living room and cause discomfort. The NeatyFresh Max fan uses a humidity switch to
control the fan to commence operation. The fan starts operating when the recorded humidity
surpasses the selected value.
Note: To eliminate chances of having the fan disabled when outdoor temperatures fall below 35
degrees Fahrenheit, the crawl space ventilations feature pre-installed, and factory-installed
thermostats. The fan will resume normal operations whenever the outdoor temperatures rise
above 50 degrees Fahrenheit.
Parameter
Power: 120V~50/60Hz
Thermostat: On at 50°F; OFF at 35°F
14" x6"
You can trim the minimum mounting plate to:
Only qualified technicians can install all Crawl Space ventilations by Abestorm. Ensure that you
adhere to the specifications and the local codes that governs your area before installation. In the
absence of local codes, follow the up-to-date versions of the international electrical code and
international residential codes. Incorrect installation or failure to conform to the instructions may
expose you to harm or even lead to electric shock, fire, or personal injury. Following the
manufacturer's instructions to the latter will reduce the risk posed by electrical equipment. For
more information on the product or queries concerning the appliance, reach the manufacturer
(company name). Before installing or performing maintenance to the appliance. Also, ensure that
it is unplugged from the power supply.
3. Grounding repository within a distance of 6 feet from the ventilations.
2. Make use of a 5/16-inch masonry drill if mounting the unit on a foundation block or brick.
1. 5/16-inch flat head or nut roller screwdriver.

2. The low-rise fan should be placed above
the building's vent.
Location:
3. If you mount the unit on a brick or
foundation block, mark the aligning on the
corners of the metallic panel. Drill a 5/16-
inch hole to attach the wall anchor in the
vent's opening. Finally, use four screws to
fix the climbing NeatyFresh Max onto the
wall.
Note:
Install the fan in the climbing space. See to
it that the motor and electrical control box
face the climbing space.
1. Get rid of the coverings or existing doors
on the building's ventilation holes.
If the low-rise fan NeatyFresh Max are
installed in the crawl space at the back of
an existing foundation ventilation opening,
it should be at a distance of not more than
three feet from each corner.

The service plan cannot cover damage due to misuse and abuse of the product. Nor does it cover
damage from water, physical damage, incorrect voltage input, and other reasons caused by the
use of the appliance other than the intended purpose. Collateral damage and indirect losses liable
for normal wear damage such as scratches are not guaranteed herein.
The warranty is a guarantee for you. Products from Abestorm are sold within 1 year from the
manufacturing date. The products are free of manufacturing defects, both in the process and
material. If any fault is found in the product, both in material and process, Abestorm will take full
liabilities to solve the problems as per the warranty terms. Whenever the appliance is unavailable,
the service plan will take effect from the day the purchase was made. The service plan can only be
effected within 1 year after the date of purchase after which, it will be rendered null and void. If the
defect occurs during this period, Abestorm will replace it with a new product or give a refund of
the same.
For queries on information about our distributors and re-sellers, reach our customer service
provider at [e-mail] or call us at working hours(8:00 AM to 5:00 PM CPST), Monday
to Friday.