ABEY Gareth Ashton 316 WSS001-316 User manual

ABEY TAPWARE / SHOWERWARRANTY INFORMATION
TERMS OF WARRANTY – Domestic and Residential (non-commercial) Use WARRANTY CONDITIONS AND EXCLUSIONSAbey provides the following extended warranty on the Abey range of tapware and showers (product) purchased for use in normal do mestic and residential (non-commercial) installations. The period for which the warranty will apply to the product di ers according to the product type and is subject to the Warranty Conditions and Exclusions set out below.Abey Australia Pty Ltd A.B.N. 34 004 589 879 (Abey) tapware and shower products are made to the highest industry standards. The terms of this warranty apply to products purchased after 1 December 2012. If a subsequent versionof this warranty is issued by Abey, the terms of that warranty will apply to products purchased after the date speci ed in that version.Abey warrants that products in the Abey range purchased for normal domestic and residential use will be free from defects in material and workmanship for the period of time per product speci ed in the following table. The warranty only applies to the original purchaser of the product and is not transferable to any other person under any circumstances. The warranty commences from the original date of purchase of the product in Australia from Abey or one of its authorised distributors or dealers. Abey's obligation under this warranty is limited to removal of the defect and making the product functional by repairing or providing a replacement of a defective part if any with a functional part in respect of the product within the warranty period stated above. This warranty will only apply where: (a) the product is installed by a licensed plumber;(b) the product is installed at a pressure no greater than 500kpa; Failure to do so will void this warranty. This warranty will also be void if damage (including but not limited to corrosion) or malfunction of the product is caused: (a) due to misuse, negligence or failure to install or connect the product in accordance with any instructions, or information provided by Abey or to properly repair the product; (b) due to normal wear and tear or the non-observance of the maintenance recommendations for the product; ABEY RANGE – Warranty Domestic and Residential (non - commercial use)Warranty periodfrom originaldate ofpurchasePRODUCTTAPWARESHOWERS (Fixed) SHOWERS (On rail)7 years replacementcartridge7 years replacementparts3 years replacementparts1 year replacement partsand labour1 labour1 labour(c) all water supply lines are ushed by the plumber before installation of the product.HOW TO CLAIM (c) due to the use of harsh adhesives, detergent, sealants, chemicals, agents, abrasive sponges, wire wool, alcohol or electrical in uences etc. which damage the product surfaces compromising their aesthetics, brightness and sanitising. To the maximum extent permitted by law, and subject to any statutory provisions to the contrary, this warranty excludes any and all liability for damage or injury to any person, damage to any property and any other economic, consequential or other loss or damage caused by any defect in the product or part of the product. Maximum: Temperature 60°C Pressure 500kpa Minimum: Temperature 1°C Pressure 300kpa (a) Contact Abey Australia Customer Central Monday – Friday, 8am – 4pm Phone: [phone] Fax: [phone] Email: [email protected] (b) Additional service fees may apply if you are seeking warranty service from a distributor or dealer other than the distributor or dealer from whom you originally purchased the product. (c) Check with Abey in advance for any costs to you when arranging a warranty call. Travel and shipping charges for parts are not covered by this warranty. (d) Abey will assess your claim. Abey may need to inspect the product as part of the assessment of your claim. If the product requires inspection, Abey will discuss with you the best way for this to occur. (e) To make a claim under this warranty, you must be able to prove when you purchased the product. The easiest way to do this is through your original proof of purchase, for example your invoice or receipt. However, if you do not have your original proof of purchase Abey may accept other evidence of the date of purchase. Other RightsThis warranty is in addition to any other rights or remedies that you may have under any Australian law (including the Australian Consumer Law) and must be read subject to such law. Nothing contained in this document shall operate to exclude, restrict or modify any such rights or remedies that you may have that cannot be excluded, restricted or modi ed under any Australian law. In addition to your rights under this warranty, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Working Speci cationsMaximum di erence in pressure between hot and cold supply is 150kpa.Recommended operating pressure: 300 to 500kpa.Where normal working pressures exceed the maximum stated above, a pressure limiting valve should be installed as excessive pressure may damage the tap and void warranty.To make a claim against this warranty

Apply thread tap or other approved sealant tothe nipple.2.
Fit the wall plate into the shower arm head according to the diagram.1.
Installation Guide
Fit the shower arm onto the nipple and ensuring it is tight, flush with the wall,
and that the arm outletis vertical.
The shower arm can be adjusted by swiveling into the desired position.
Note: This shower may not be suitable for use with gravityfed water
heaters, low and unequal pressure supply networks, instantaneous water
heaters, tempering valves and/or thermostatic mixing valves.
In accordance with AS/NZS 3718
The following pressure range should be complied with:
·Minimum working pressure 150Kpa
·Maximum working pressure 750Kpa
3.
4.
ALL ABEY SHOWERS MUST BE INSTALLED IN ACCORDANCE WITH
AS/NZS3500 SERIES.
ALL ABEY SHOWERS ARE CERTIFIED IN ACCORDANCE WITH
AS/NZS 3718:2005, LICENCE NUMBER WMK26399