ABI INTERIORS ROUND MIRROR LED 800MM User manual

RO U N D MIRRO R LE D 80 0MM
Dis cla imer: P ro d u c ts in th is ma n u a l mu s t by la w b e in s talled b y licen s ed an d reg is tered tra d es p eo p le in a cco rd a n ce w ith th e releva n t stan d a rds . A B I a n d th e ma n u fa ctu rer/d is trib u to r
res erve t h e rig h t to va ry s p ecif ic a tio n s o r d elete mo d els fro m t h eir ra n g e w ith o u t prio r n o tif ic a t io n . Dimen s io n s a re n o min a l mea s u remen ts o n ly. Th e in f o rmatio n lis ted is co rrect at th e time
o f p u b lica tio n , h o w ever A B I a n d th e man u f a c tu rer/d is trib u to r ta kes n o res p o n s ib ility fo r p rin tin g erro rs. C o p yrig h t © A B I I n terio rs 2 02 2 Pty Ltd
SPECIFICATIONS
RECOMMENDED USE Domestic, Commercial
MATERIAL 304 Stainless Steel
FIXING HARDWARE INCLUDED Yes, 6x Philips head screws and plugs
LED 4000K

Regularly clean with mild
liquid detergent or soap
and water
DO NOT use cream
cleaners or bleach.
These substances are
abrasive
DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material
1
INTERIORS
Choose a suitable location for your mirror. Ensure
your electrical wire is behind the mirror and not
obstructing the bracket or transformer box
Note: The wall bracket must be installed
into adequite wall structure.
2
Fix the wall bracket to the wall. Be sure to offset the
bracket from the top mark.
Note: The supplied fixings are for timber and cement
you will need to purchase alternative fixing screws if
your wall is a different construction.
If necessary you can reposition the bracket to
align with your walls internal structure.
34Ensure a licensed electrician connects the wiring.
Attach the mirror. Ensure the brackets interlock
and that the mirror is secure. Test and
commission.
In The Box
1x Mirror 2x Wall Brackets
6x Fixing Screws (30mm)
6x Plugs
INSTALLATION GUIDE
Note: This product must be installed by a licensed electrician. This is a general
installation guide - there a re many factors that are involved that can alter the
installation method. This product install must comply with the standards in your
respective country and must be adhered to by your licensed tradesperson.
[AS/NZS 3000:2018]