ABK i-Cooking User manual

Plakhorstweg 12
NL-7008 AT DOETINCHEM
t: +31 [0]314-320910
f: +31 [0]314-320919
e: [e-mail]
w: www.abk-innovent.nl
All rights reserved [Rev.110610] Art.nr. KDI0100004
Customer service
In case of problems you cannot solve
yourself, please contact your supplier
our the ABK InnoVent service
department USER | INSTRUCTION MANUAL
i-Cooking induction
Read this manual carefully before installing and
using your i-Cooking induction product, for your
own safety and to prevent any unnecessary
damage to the product and/or your kitchen.

Plakhorstweg 12
NL-7008 AT DOETINCHEM
t: +31 [0]314-320910
f: +31 [0]314-320919
e: [e-mail]
w: www.abk-innovent.nl
All rights reserved [Rev.110610] Art.nr. KDI0100004
Customer service
In case of problems you cannot solve
yourself, please contact your supplier
our the ABK InnoVent service
department USER | INSTRUCTION MANUAL
i-Cooking induction
Read this manual carefully before installing and
using your i-Cooking induction product, for your
own safety and to prevent any unnecessary
damage to the product and/or your kitchen.

EN 2
Contents
Chapter 1
1.1 Introduction 04
1.2 Description 04
1.3 Components 05
Chapter 2
2.1 Safety regulations 07
2.2 Safety instructions 08
Chapter 3
3.1 Induction technology 10
3.2 Using the appliance 11
3.3 Display 11
3.4 Cooking functions 12
3.5 Pans 15
Chapter 4
4.1 Maintenance 15
4.2 Helpful tips 16
4.3 Troubleshooter 16
Chapter 5
5.1 Electrical installation 17
5.2 Installation 18
5.3 Configuration 21
CE-Declaration 22
EN 3 Contents

EN 2
Contents
Chapter 1
1.1 Introduction 04
1.2 Description 04
1.3 Components 05
Chapter 2
2.1 Safety regulations 07
2.2 Safety instructions 08
Chapter 3
3.1 Induction technology 10
3.2 Using the appliance 11
3.3 Display 11
3.4 Cooking functions 12
3.5 Pans 15
Chapter 4
4.1 Maintenance 15
4.2 Helpful tips 16
4.3 Troubleshooter 16
Chapter 5
5.1 Electrical installation 17
5.2 Installation 18
5.3 Configuration 21
CE-Declaration 22
EN 3 Contents

1.1Introduction 1.2Description
By purchasing ABK InnoVents i-Cooking i-Cooking products are available in
induction,youchoseforaqualityproduct. different compositions, with different
positionsandnumbersofinductionzones.
We advise you to read this manual These can be fitted into stainless steel,
carefully before starting to install and use composite, stone, glass or concrete
the appliance. It will function perfectly for worktops.
many years if maintained carefully and
usedproperly. i-Cooking induction is a personal cooking
system. You can determine the number,
This i-Cooking appliance is designed and position and type of inducion zones, to
suitableforprivateuseonly,undernormal, your personal preference. For example
dailyconditions.Ifanyfailureshouldarise, with more space in between, making it
weadviseyoutocontactyoursupplier. muchmorepracticaltouselargerpans.
The zones are available in two power
ranges up to 3000W, both have a boost
function.
With the flush or top mount installation,
the zones are completely integrated into
the worktop. The worktop continues in
between the induction cooking zones.
With the four different base sets you
can create your own lay-out. See the
guide lines in the brochure or on our
ATTEN T IO N : Th i s website, or ask our sales department for
more information.
product may only be
fitted according to the legal
requirements and in a properly
ventilatedenvironment.Readthe
instructions carefully before
installationanduse.
EN 4 Introduction
!
1.3 Components
i-Cooking induction example
1 Power zone | boost 3100W
2 Standard zone | boost 1770W
3 Control panel | touch control
4 Power unit | loaded rate
3600W to 7200W [2 separate
branch circuits]
12
4
3
EN 5 Components

1.1Introduction 1.2Description
By purchasing ABK InnoVents i-Cooking i-Cooking products are available in
induction,youchoseforaqualityproduct. different compositions, with different
positionsandnumbersofinductionzones.
We advise you to read this manual These can be fitted into stainless steel,
carefully before starting to install and use composite, stone, glass or concrete
the appliance. It will function perfectly for worktops.
many years if maintained carefully and
usedproperly. i-Cooking induction is a personal cooking
system. You can determine the number,
This i-Cooking appliance is designed and position and type of inducion zones, to
suitableforprivateuseonly,undernormal, your personal preference. For example
dailyconditions.Ifanyfailureshouldarise, with more space in between, making it
weadviseyoutocontactyoursupplier. muchmorepracticaltouselargerpans.
The zones are available in two power
ranges up to 3000W, both have a boost
function.
With the flush or top mount installation,
the zones are completely integrated into
the worktop. The worktop continues in
between the induction cooking zones.
With the four different base sets you
can create your own lay-out. See the
guide lines in the brochure or on our
ATT EN T IO N : Th i s website, or ask our sales department for
more information.
product may only be
fitted according to the legal
requirements and in a properly
ventilatedenvironment.Readthe
instructions carefully before
installationanduse.
EN 4 Introduction
!
1.3 Components
i-Cooking induction example
1 Power zone | boost 3100W
2 Standard zone | boost 1770W
3 Control panel | touch control
4 Power unit | loaded rate
3600W to 7200W [2 separate
branch circuits]
12
4
3
EN 5 Components

i-Cooking induction consists of the
individual induction zones and one
control panel, which are all connected to
the central power unit with a
[700/1000mm long] cable. The zones
and control panel can be flush or top
mounted A silicone material must be
used to guarantee a waterproof fixation.
flush mount installation top mount installation
A
B
4
53
C
5 min
A
4
53
C
description dimensions standard zone power zone control panel
Wire code 5 7 C
ceramic glass A Ø270mm Ø300mm 276x150 | R=75mm
rabbet dim. B Ø274mm Ø304mm 280x154 | R=77mm
cut out dim. C Ø254mm Ø284mm 260x134 | R=67mm
glass thickness 4mm 4mm 4mm
total height 4+53mm 4+53mm 4+31mm
induction zone Ø160mm Ø200mm -
power 1100W 2300W -
boost power 1770W 3100W -
dimensions power unit: 270x210x48mm
EN 6 Components EN 7 Safety
it, until the risk at burning injuries has
2.1Safetyinstructions dissapeared.
Thei-Cookingproductmeetsallcurrent Makesurethatchildrenarenotabletopull
safety instructions. By using it pans from the i-Cooking product, while or
incorrectly, a risk of personal or rightafterusingit.Atyourlocalspecialist,
materialinjurymayarise. specially designed safety racks are
availableforthesesituations.
We advise you to read this users
manual carefully before use. In this Packaging materials like plastic and foam
manualyouwillfindthemostimportant canbedangerousforchildren,forexample
instructions for safety, daily use and the risk of suffocation! Store the supplied
maintenance. Store this manual in a packaging materials outside the range of
logicalplaceandpassitontoapossible children and make sure these materials
futureuser. are disposed properly, as quick as
possible.
This product is only for the domestic
preparation of food. Any other use is 2.1.2Technicalsafety
prohibited and may lead to danger. The Check the product before any use on
manufacturercannotbeheldliableforany visiblefailures.Incaseofdoubtdonotuse
damages, arisen by incorrect use, or any it. A damaged product can harm your
otheruse. safetyandhealth.
Before installing it, compare the
The i-Cooking product may only be used information on the product type plate and
by persons capable of using it safely and make sure it meets the values and
who are informed about the contents of requirements of your local electricity
thismanual. network [tension and frequency]. These
values must meet to prevent damages. In
2.1.1Children caseofdoubt,consultacertifiedfitter.
When you are using the appliance, keep
watch of children around you. Never let
themplaywithit.
This products generates heat while and
afterusingit,alsoradiatingthisheatto its
direct surroundings. Therefore, keep
childrenatadistancewhileandafterusing
Chapter 2

i-Cooking induction consists of the
individual induction zones and one
control panel, which are all connected to
the central power unit with a
[700/1000mm long] cable. The zones
and control panel can be flush or top
mounted A silicone material must be
used to guarantee a waterproof fixation.
flush mount installation top mount installation
A
B
4
53
C
5 min
A
4
53
C
description dimensions standard zone power zone control panel
Wire code 5 7 C
ceramic glass A Ø270mm Ø300mm 276x150 | R=75mm
rabbet dim. B Ø274mm Ø304mm 280x154 | R=77mm
cut out dim. C Ø254mm Ø284mm 260x134 | R=67mm
glass thickness 4mm 4mm 4mm
total height 4+53mm 4+53mm 4+31mm
induction zone Ø160mm Ø200mm -
power 1100W 2300W -
boost power 1770W 3100W -
dimensions power unit: 270x210x48mm
EN 6 Components EN 7 Safety
it, until the risk at burning injuries has
2.1Safetyinstructions dissapeared.
Thei-Cookingproductmeetsallcurrent Makesurethatchildrenarenotabletopull
safety instructions. By using it pans from the i-Cooking product, while or
incorrectly, a risk of personal or rightafterusingit.Atyourlocalspecialist,
materialinjurymayarise. specially designed safety racks are
availableforthesesituations.
We advise you to read this users
manual carefully before use. In this Packaging materials like plastic and foam
manualyouwillfindthemostimportant canbedangerousforchildren,forexample
instructions for safety, daily use and the risk of suffocation! Store the supplied
maintenance. Store this manual in a packaging materials outside the range of
logicalplaceandpassitontoapossible children and make sure these materials
futureuser. are disposed properly, as quick as
possible.
This product is only for the domestic
preparation of food. Any other use is 2.1.2Technicalsafety
prohibited and may lead to danger. The Check the product before any use on
manufacturercannotbeheldliableforany visiblefailures.Incaseofdoubtdonotuse
damages, arisen by incorrect use, or any it. A damaged product can harm your
otheruse. safetyandhealth.
Before installing it, compare the
The i-Cooking product may only be used information on the product type plate and
by persons capable of using it safely and make sure it meets the values and
who are informed about the contents of requirements of your local electricity
thismanual. network [tension and frequency]. These
values must meet to prevent damages. In
2.1.1Children caseofdoubt,consultacertifiedfitter.
When you are using the appliance, keep
watch of children around you. Never let
themplaywithit.
This products generates heat while and
afterusingit,alsoradiatingthisheatto its
direct surroundings. Therefore, keep
childrenatadistancewhileandafterusing
Chapter 2

If the grease or oil should catch fire
2.2Usingtheappliancesafely unexpectedly, never use water to extinct
the flames! Extinct the flames with an
The i-Cooking product becomes very hot appropriate cover, damp cloth or
and also remains hot a considerable time somethingsimilar.
afterwards. Do not touch the product
whileordirectlyafterusingit. Do not use cookware with a pan bottom
which is too thin. Never heat cookware
Always use an oven glove or pot-holder if when it is empty, unless explicitly stated
you are working with the hot cooking otherwisebythesupplierofthecookware.
appliance. The glove or holder may also This may damage you appliance and
not be wet or damp, because then they cookware.
better conduct heat and may cause
burninginjuriesunexpectedly. Whenusingtheappliance,heatandmoist
arise.Alwaysmakesurethatthespaceor
Do not heat closed cans etc. on the room where the appliance is used is
appliance. These cans may explode ventilated properly. Open a window, or
because of over-pressure, possibly take care of a mechanical extraction, for
causinginjuryorriskoffire. examplebya properkitchenextractor.
Do not place and use the appliance in the
openair.
Only use pans with a diameter which is
not larger or smaller than as stated in this
manual. If the pan has a smaller diameter,
theinductionzonedoesnotfunction.Ifthe
pan diameter is too large, it may cause
damagetotheworktop.Themanufacturer
cannotbeheldforthis.
Alwayskeepwatchwhenyouareworking
with oil and grease products. If these
products get overheated they can catch
fire. In such a situation your kitchen
extractorcanalsocatchfire.Riskoffire!
EN 8 Safety EN 9 Safety
If the i-Cooking appliance is or was used properly.
intensively, we advise to ventilate the
room extra, or switch the kitchen If the i-Cooking appliance should become
extractorinahighermotorposition. defective within the guaranteed period, it
may only be repaired by ABK InnoVent,
If a power socket is near the appliance, otherwisetheguaranteeexpires.Niet
makesurethatthecablesdonottouchthe
[still] hot appliance. The insulation of the Accessories
cables can get damaged, possibly giving Accessories are only to be used if these
youanelectricalshock. areexplicitlyclearedbythemanufacturer.
The use of other parts is not allowed and
Always make sure that the food you are leads to expiration of the guarantee and
preparing is heated sufficiently. Possible productliability.
present bacteria are only eliminated if the
temperature is high enough [above 70°C] The manufacturer cannot be held liable
and is kept so long enough [at least 10 for damages, resulting from not
minutes]. following the safety instructions and
warnings.
If you use a drawer under the i-Cooking
appliance, without a cover panel, make
sure here are no [highly] flammable
products. In case of a cutlery drawer, it
must be made from heat-resistant
material.
Never use a steam cleaner to clean the
appliance.Thesteammightgetincontact
with parts which are under electrical
tension.Riskofshortcircuits!
If the appliance has not been used for a
longer period, we advise a thorough
cleaning of the parts before re-using it. If
nessecary, have the appliance checked
firstby aprofessional,to checkifit works

If the grease or oil should catch fire
2.2Usingtheappliancesafely unexpectedly, never use water to extinct
the flames! Extinct the flames with an
The i-Cooking product becomes very hot appropriate cover, damp cloth or
and also remains hot a considerable time somethingsimilar.
afterwards. Do not touch the product
whileordirectlyafterusingit. Do not use cookware with a pan bottom
which is too thin. Never heat cookware
Always use an oven glove or pot-holder if when it is empty, unless explicitly stated
you are working with the hot cooking otherwisebythesupplierofthecookware.
appliance. The glove or holder may also This may damage you appliance and
not be wet or damp, because then they cookware.
better conduct heat and may cause
burninginjuriesunexpectedly. Whenusingtheappliance,heatandmoist
arise.Alwaysmakesurethatthespaceor
Do not heat closed cans etc. on the room where the appliance is used is
appliance. These cans may explode ventilated properly. Open a window, or
because of over-pressure, possibly take care of a mechanical extraction, for
causinginjuryorriskoffire. examplebya properkitchenextractor.
Do not place and use the appliance in the
openair.
Only use pans with a diameter which is
not larger or smaller than as stated in this
manual. If the pan has a smaller diameter,
theinductionzonedoesnotfunction.Ifthe
pan diameter is too large, it may cause
damagetotheworktop.Themanufacturer
cannotbeheldforthis.
Alwayskeepwatchwhenyouareworking
with oil and grease products. If these
products get overheated they can catch
fire. In such a situation your kitchen
extractorcanalsocatchfire.Riskoffire!
EN 8 Safety EN 9 Safety
If the i-Cooking appliance is or was used properly.
intensively, we advise to ventilate the
room extra, or switch the kitchen If the i-Cooking appliance should become
extractorinahighermotorposition. defective within the guaranteed period, it
may only be repaired by ABK InnoVent,
If a power socket is near the appliance, otherwisetheguaranteeexpires.Niet
makesurethatthecablesdonottouchthe
[still] hot appliance. The insulation of the Accessories
cables can get damaged, possibly giving Accessories are only to be used if these
youanelectricalshock. areexplicitlyclearedbythemanufacturer.
The use of other parts is not allowed and
Always make sure that the food you are leads to expiration of the guarantee and
preparing is heated sufficiently. Possible productliability.
present bacteria are only eliminated if the
temperature is high enough [above 70°C] The manufacturer cannot be held liable
and is kept so long enough [at least 10 for damages, resulting from not
minutes]. following the safety instructions and
warnings.
If you use a drawer under the i-Cooking
appliance, without a cover panel, make
sure here are no [highly] flammable
products. In case of a cutlery drawer, it
must be made from heat-resistant
material.
Never use a steam cleaner to clean the
appliance.Thesteammightgetincontact
with parts which are under electrical
tension.Riskofshortcircuits!
If the appliance has not been used for a
longer period, we advise a thorough
cleaning of the parts before re-using it. If
nessecary, have the appliance checked
firstby aprofessional,to checkifit works

EN 10 Use
3.1Inductiontechnology 3.2Usingtheappliance
Induction cooking is considered, just Thei-Cooking applianceis operatedby an
like gas cooking, as an energy friendly electronic touch control panel. By
way of cooking. It is based on the touching the symbols on the glass panel,
induction principle, where the pan theseveralfucntionsareactivated.During
bottomisheateddirectly.Thisworksas the operating, a matching light is shown,
follows: accompagniedbya“beep“sound.Youcan
A generator under the glass plate easily adjust the power, by sliding your
produces an induction zone. If a pan finger in between the positions 0 to 9, or
withamagneticbottomisplacedonthe simply by pressing the required position
zone,itwillheatthepanbottom. direclty
For this type of cooking, specific pans
with a thick, magnetic bottom are Each induction zone has its individual
required. The induction zone coolingventilator,whichwillstartblowing
automatically adapts itself to the pan at low speed if the zone heats up. It will
bottom diameter. However, when the increase its speed when the zone gets
pan is too small or not suitable for warmer.Ifthetemperatureallowsit,itwill
induction, it will not heat the pan. This automatically switch off again. Even after
will be indicated in the display by a the appliance itself is switched off, the
symbol[U] ventilator may keep blowing temporarily.
This is necessary to cool and protect the
electroniccomponentsinside.
Chapter 3
EN 11 Use
p
0 9
3.3Symbolismcontrolpanel
On|off
0-9 Poweradjuster[slider]
U Pandetector[nosuitableortoosmallpan]
A Automaticcooking
E Error|electronicfailure
H Restwarmthindicator
P Powerbooster
L Lock
Warmingfunction[70°C]
|| Pauseposition
Touchcontroldisplay
[variespermodel]

EN 10 Use
3.1Inductiontechnology 3.2Usingtheappliance
Induction cooking is considered, just Thei-Cooking applianceis operatedby an
like gas cooking, as an energy friendly electronic touch control panel. By
way of cooking. It is based on the touching the symbols on the glass panel,
induction principle, where the pan theseveralfucntionsareactivated.During
bottomisheateddirectly.Thisworksas the operating, a matching light is shown,
follows: accompagniedbya“beep“sound.Youcan
A generator under the glass plate easily adjust the power, by sliding your
produces an induction zone. If a pan finger in between the positions 0 to 9, or
withamagneticbottomisplacedonthe simply by pressing the required position
zone,itwillheatthepanbottom. direclty
For this type of cooking, specific pans
with a thick, magnetic bottom are Each induction zone has its individual
required. The induction zone coolingventilator,whichwillstartblowing
automatically adapts itself to the pan at low speed if the zone heats up. It will
bottom diameter. However, when the increase its speed when the zone gets
pan is too small or not suitable for warmer.Ifthetemperatureallowsit,itwill
induction, it will not heat the pan. This automatically switch off again. Even after
will be indicated in the display by a the appliance itself is switched off, the
symbol[U] ventilator may keep blowing temporarily.
This is necessary to cool and protect the
electroniccomponentsinside.
Chapter 3
EN 11 Use
p
0 9
3.3Symbolismcontrolpanel
On|off
0-9 Poweradjuster[slider]
U Pandetector[nosuitableortoosmallpan]
A Automaticcooking
E Error|electronicfailure
H Restwarmthindicator
P Powerbooster
L Lock
Warmingfunction[70°C]
|| Pauseposition
Touchcontroldisplay
[variespermodel]

EN 12 Use
3.4.4Restwarmthindication
3.4Cookingfunctions After use of the cookingzone, the surface
will remain hot for some time. After
3.4.1Start-stop switching off the zone or the appliance, in
To start, push the on/off button. On the thedisplaytheletter”H“lightsupforsome
displaythe”0"positionswilllightup. time. During this time no heat sensitive
To switch off the zone[s], you also push products may be placed on the hot zone.
the on/off button. The display turns black Thereisalsoariskofburningorfire.
orshowsthesymbol”H“[restwarmth].
3.4.5Boosterfunction
3.4.2Activatingthecookingzone The booster function generates an extra
Push the on/off button first. Now select high power during maximal 10 minutes,
therequiredzoneandtouchtheaccording for example to quickly boil water. The
position on the display. The control light electronical powermanagement regulates
next to the zone lights up as well. Now the maximum available power. If the
adjust the required power. To stop, adjust power boost is activated, this might
the power to ”0" In the display a ”0“or influence the power of another linked
”H“[restwarmth]symbolappears. induction zone. This happens when the
If nothing is touched, the display requested power exceeds the maximum
automatically switches into the waiting- available net power. On the display of the
position. influenced induction zone, the ”9” will
start blinking, after a few seconds it will
3.4.3Pandetection first indicate and then supply the
The pan detection function is built in for maximumavailablepower.
safety. Without a pan the induction does
not work/ If there is not suitable or no pan
at all, it is impossible to generate or
change the power. In the display a ”U“
symbolappears.Itdisappearsifasuitable
panisplaced.Ifapanisremovedfromthe
cooking zone, the current function will be
interrupted. The display shows the ”U“
symbol, untill the pan is replaced, after
whichthecookingprocessiscontinued.
EN 13 Use
3.4.6Individualzonetimer 3.4.7Timer
The timer enables you to simultaneously Additionally to the individual zone timer
setanindividualtimingoneachofthe3or youcanalsosetaseparatetimer.
4zones[from0to99minutes] Follow the above steps, but WITHOUT
selectingacookingzone[skipsteps2and
Example:16minutesonpower7. 3]
1.Switchontheappliancebypressingthe
on/offsymbolonthecontrolpanel. 3.4.8Automaticcooking
2. Select the right zone by pressing the On each zone you can use the automatic
symbol on the control panel [”0” and cooking function, which means it starts
indicatorondisplayislit]. cooking with maximum power and
3.Adjustthepowerto7byusingtheslider automaticallyshiftsbacktothepreviously
orpressingitonthedisplay. set power if the required temperature is
4. Now you can activate the timer by reached.
pressing on ”CL“. In the display you will Example: Automatic cooking, based on
see ”00”. The number 16 now must be powerposition7.
enteredintwosteps[first”6”then“1”]. 1.Switchontheappliancebypressingthe
5. Move the slider until you see the on/offsymbolonthecontrolpanel.
number”6”.Confirmbypressingthetimer 2. Select the right zone by pressing the
indicator. symbol on the control panel [”0” and
7. Move the slider until you see the indicatorondisplayislit].
number”1”andconfirmagainbypressing 3.Adjustthepowerto9byusingtheslider
thetimerindicator.”16”. orpressingitonthedisplay
To switch off the zone timer, repeat from 4.Pressthe”9”again,sothatnowalsothe
step2andsetthetimeto“00“. ”A“appearsinthedisplay.
If the zone timer reaches the set time, the 5. Set the requested power position, from
cookingzonewillbeswitchedoffand“00“ ”9” to ”7”. In the display both the ”7” and
blinks in the display, and a the”A”blink.
beepingalarmsounds.Bypressingonthe You can switch off the automatic cooking
blinking”00”thealarmisswitchedoff. function by first selecting the zone where
the ”7” and the ”A“ blink. Then choose
anotherpowerpositionbyusingtheslider
onthecontrolpanel.

EN 12 Use
3.4.4Restwarmthindication
3.4Cookingfunctions After use of the cookingzone, the surface
will remain hot for some time. After
3.4.1Start-stop switching off the zone or the appliance, in
To start, push the on/off button. On the thedisplaytheletter”H“lightsupforsome
displaythe”0"positionswilllightup. time. During this time no heat sensitive
To switch off the zone[s], you also push products may be placed on the hot zone.
the on/off button. The display turns black Thereisalsoariskofburningorfire.
orshowsthesymbol”H“[restwarmth].
3.4.5Boosterfunction
3.4.2Activatingthecookingzone The booster function generates an extra
Push the on/off button first. Now select high power during maximal 10 minutes,
therequiredzoneandtouchtheaccording for example to quickly boil water. The
position on the display. The control light electronical powermanagement regulates
next to the zone lights up as well. Now the maximum available power. If the
adjust the required power. To stop, adjust power boost is activated, this might
the power to ”0" In the display a ”0“or influence the power of another linked
”H“[restwarmth]symbolappears. induction zone. This happens when the
If nothing is touched, the display requested power exceeds the maximum
automatically switches into the waiting- available net power. On the display of the
position. influenced induction zone, the ”9” will
start blinking, after a few seconds it will
3.4.3Pandetection first indicate and then supply the
The pan detection function is built in for maximumavailablepower.
safety. Without a pan the induction does
not work/ If there is not suitable or no pan
at all, it is impossible to generate or
change the power. In the display a ”U“
symbolappears.Itdisappearsifasuitable
panisplaced.Ifapanisremovedfromthe
cooking zone, the current function will be
interrupted. The display shows the ”U“
symbol, untill the pan is replaced, after
whichthecookingprocessiscontinued.
EN 13 Use
3.4.6Individualzonetimer 3.4.7Timer
The timer enables you to simultaneously Additionally to the individual zone timer
setanindividualtimingoneachofthe3or youcanalsosetaseparatetimer.
4zones[from0to99minutes] Follow the above steps, but WITHOUT
selectingacookingzone[skipsteps2and
Example:16minutesonpower7. 3]
1.Switchontheappliancebypressingthe
on/offsymbolonthecontrolpanel. 3.4.8Automaticcooking
2. Select the right zone by pressing the On each zone you can use the automatic
symbol on the control panel [”0” and cooking function, which means it starts
indicatorondisplayislit]. cooking with maximum power and
3.Adjustthepowerto7byusingtheslider automaticallyshiftsbacktothepreviously
orpressingitonthedisplay. set power if the required temperature is
4. Now you can activate the timer by reached.
pressing on ”CL“. In the display you will Example: Automatic cooking, based on
see ”00”. The number 16 now must be powerposition7.
enteredintwosteps[first”6”then“1”]. 1.Switchontheappliancebypressingthe
5. Move the slider until you see the on/offsymbolonthecontrolpanel.
number”6”.Confirmbypressingthetimer 2. Select the right zone by pressing the
indicator. symbol on the control panel [”0” and
7. Move the slider until you see the indicatorondisplayislit].
number”1”andconfirmagainbypressing 3.Adjustthepowerto9byusingtheslider
thetimerindicator.”16”. orpressingitonthedisplay
To switch off the zone timer, repeat from 4.Pressthe”9”again,sothatnowalsothe
step2andsetthetimeto“00“. ”A“appearsinthedisplay.
If the zone timer reaches the set time, the 5. Set the requested power position, from
cookingzonewillbeswitchedoffand“00“ ”9” to ”7”. In the display both the ”7” and
blinks in the display, and a the”A”blink.
beepingalarmsounds.Bypressingonthe You can switch off the automatic cooking
blinking”00”thealarmisswitchedoff. function by first selecting the zone where
the ”7” and the ”A“ blink. Then choose
anotherpowerpositionbyusingtheslider
onthecontrolpanel.

EN 14 Use
3.4.9Pause 3.4.12Lock
With this function, all current cooking Thepreventunwantedswitchingonofthe
settingsaretemporarilyinterrupted.Press zones, for example while cleaning, the
the pause symbol for app. 2 seconds. To control panel can be locked, with
continue, press again for app. 2 seconds exception of the on/off switch. Follow
[ledblinks]andpressarandomsymbol. thesesteps:
1.Presstheon/offswitch.
3.4.10Memoryfunction 2. Simultaneously press the ”P“ and the
After switching off the appliance, it is ”0”oftherightdisplay.
possibletorecallthelastsettingslike: 3. Press the “0“ again of the right display.
-Powersettingsoftheindividualzones Nowthesymbol”L“appearsinthedisplay.
-Cookingtimesettingsofindividualzones Tounlockagain:
-Automaticcookingsettings 1.Presstheon/offswitch.
Followthesesteps: 2.Simultaneously pressthe“P“ and”L“of
1.Presstheon/offsymbol. the right display, within 5 seconds. The
2. Press the pause symbol within 6 symbol ”0” or ”H“ appears in the display.
seconds. Now the previous settings are Press the ”P“ again and all displays are
activated. switchedoff.
3.4.11Warmingfunction
By using this function, dishes are
automaticallykeptwarmatatemperature
of 70°C. This prevents boiling over and
burning. You can use this function for
maximal 2 hours. If the pan is removed,
thewarmingfunctionremainsworkingfor
an extra 10 minutes, unless the appliance
isswitchedoff.
1. Select the zone for the warming
function.
2. Press the warming symbol, on the left
side of the power slider indicator. To
switch off the function, press the display
of the zone, and select the requested
powerpositionbetween“0“and“9“.
EN 15 Maintenance
3.5Pans 4.1Maintenance
If the pan diameter is too large, this will Cleantheapplianceaftereachuseandrub
easier cause damages to your worktop. it dry again. Make sure that the
Themanufacturercannotbeheldliablefor components are cooled down sufficiently
suchdamages. beforestarting.
3.5.1Panbottom Neveruseasteamcleaner.Thesteamcan
Induction cooking requires specific pans get in contact with parts that are under
which have an induction suitable electric tension and can cause short-
magneticpanbottom. circuit.
3.5.2Pandiameter Donotusepointyorsharpobjectstoclean
Always use a pan that fits with the the silicone, control panel or the cooking
induction zone. Use the following ground zones.
rule:
largediameteronapowerzone Never use these products to avoid
smalldiameteronastandardzone degradation of the cooking appliance
Seeindicativetablebelow. surface:sand,soda/alkali,acidorchloride
containing cleaners, grill or oven sprays,
3.5.3Energy-consious cleaners for dishwashers, stain or rest
Cook energy-consious, preferably with a removers, abrasives or sponges/brushes
pan lid which saves a lot of energy withagratingsurface.
because it prevents that less warmth can
escapefromthepan. Remove sweet products like marmelade,
sugar containing dishes or liquids
immediately from the appliance to avoid
degradationofthesurface.
After the cleaning you must rub the i-
Cooking appliance dry with a clean cloth,
toavoidcalcification.
induction zone pan Ø [cm]
min. max.
power zone 15 26
standard zone 12 24
Chapter 4

EN 14 Use
3.4.9Pause 3.4.12Lock
With this function, all current cooking Thepreventunwantedswitchingonofthe
settingsaretemporarilyinterrupted.Press zones, for example while cleaning, the
the pause symbol for app. 2 seconds. To control panel can be locked, with
continue, press again for app. 2 seconds exception of the on/off switch. Follow
[ledblinks]andpressarandomsymbol. thesesteps:
1.Presstheon/offswitch.
3.4.10Memoryfunction 2. Simultaneously press the ”P“ and the
After switching off the appliance, it is ”0”oftherightdisplay.
possibletorecallthelastsettingslike: 3. Press the “0“ again of the right display.
-Powersettingsoftheindividualzones Nowthesymbol”L“appearsinthedisplay.
-Cookingtimesettingsofindividualzones Tounlockagain:
-Automaticcookingsettings 1.Presstheon/offswitch.
Followthesesteps: 2.Simultaneously pressthe“P“and”L“of
1.Presstheon/offsymbol. the right display, within 5 seconds. The
2. Press the pause symbol within 6 symbol ”0” or ”H“ appears in the display.
seconds. Now the previous settings are Press the ”P“ again and all displays are
activated. switchedoff.
3.4.11Warmingfunction
By using this function, dishes are
automaticallykeptwarmatatemperature
of 70°C. This prevents boiling over and
burning. You can use this function for
maximal 2 hours. If the pan is removed,
thewarmingfunctionremainsworkingfor
an extra 10 minutes, unless the appliance
isswitchedoff.
1. Select the zone for the warming
function.
2. Press the warming symbol, on the left
side of the power slider indicator. To
switch off the function, press the display
of the zone, and select the requested
powerpositionbetween“0“and“9“.
EN 15 Maintenance
3.5Pans 4.1Maintenance
If the pan diameter is too large, this will Cleantheapplianceaftereachuseandrub
easier cause damages to your worktop. it dry again. Make sure that the
Themanufacturercannotbeheldliablefor components are cooled down sufficiently
suchdamages. beforestarting.
3.5.1Panbottom Neveruseasteamcleaner.Thesteamcan
Induction cooking requires specific pans get in contact with parts that are under
which have an induction suitable electric tension and can cause short-
magneticpanbottom. circuit.
3.5.2Pandiameter Donotusepointyorsharpobjectstoclean
Always use a pan that fits with the the silicone, control panel or the cooking
induction zone. Use the following ground zones.
rule:
largediameteronapowerzone Never use these products to avoid
smalldiameteronastandardzone degradation of the cooking appliance
Seeindicativetablebelow. surface:sand,soda/alkali,acidorchloride
containing cleaners, grill or oven sprays,
3.5.3Energy-consious cleaners for dishwashers, stain or rest
Cook energy-consious, preferably with a removers, abrasives or sponges/brushes
pan lid which saves a lot of energy withagratingsurface.
because it prevents that less warmth can
escapefromthepan. Remove sweet products like marmelade,
sugar containing dishes or liquids
immediately from the appliance to avoid
degradationofthesurface.
After the cleaning you must rub the i-
Cooking appliance dry with a clean cloth,
toavoidcalcification.
induction zone pan Ø [cm]
min. max.
power zone 15 26
standard zone 12 24
Chapter 4

Oneormorezoneshavebeenswitched-
4.2Helpfultips off
The safety system may have interefered
Make sure that the pans are positioned in because:
the middel of the zone while cooking, -youforgottoswitch-offthecookingzone.
because of the automatic pan detection -oneormoreswitchesarecovered.
sytemintegratedinthezones. -the pan is empty and the bottom is
overheated.
Repairs to electrical appliances may only -The appliance also has an automatic
be executed by certified professionals. power reduction and emergency stop in
Inexpert executed repairs cause danger caseofanoverload.
fortheuser.
Ventilatorcontinuesafterswitching-off
4.3Troubleshooter thezone
-Thisisnotanerror,theventilatorprotects
Theapplianceisnotworking the electronics from overheating. After
-Faulty connection to the electrical cooling down sufficiently, the ventilator
network. willautomaticallystop.
-Afuseorstophasinterfered.
-Thelockfunctionisactivated. The automatic cooking function does
-There is water or grease on the control notwork
keys. -Thecookingzoneisstillhot,code”H“.
-Foractivation thehighest powerposition
Code”U” hasbeensetto”9”.
-There is no pan placed on the cooking
zone. OnthedisplayIcansee3or4”L“codes
-The pan is not suitable for induction -Seechapter3,lockfunctionisactivated.
cooking.
-The pan bottom diameter is too small for OnthedisplayIcanseea”U“code
thezone. -See chapter 3, warming fucntion is
activated.
Code”C“or“E“
-Call your supplier for a repair and clearly OnthedisplayIcanseethecode||
mentiontheerrorcode. -See chapter 3, pause function is
activated.
EN 16 Troubleshooter
Chapter 5
EN 17 Installation
Ratedload:
5.1Electricalinstallation Seetypeplateonyourappliance.
The i-Cooking appliance may only be Connection:
connected to an effectively grounded AC230V|50Hz
power socket. This power socket must
always remain freely accessible for Fuse:
possibleservicingpurposes. 10A[typeBorC]
The appliance may only be connected to
the electrical network by a certified Earthleakagecircuitbreaker:
electrician. He or she is aware of the According to EU regulations and
nationalandlocalregulationsofthepower guidelines,itisadvisorytofittheelectrical
company. Installation is only allowed on a house installation with an earth leakage
NEN1010certifiedinstallation. circuitbreaker[30mA].
The manufacturer cannot be
Ifthepowersocketisnotaccessible,orin held liable for direct and/or
caseofapermanentelectricalinstallation, indirect damages, resulting from an
it must be possible to disconnect the inexpert installation or incorrect
appliancefromtheelectricalnetworkviaa connection.
switch, with all polesWanneer het
stopcontact niet toegankelijk is of er een Moreover, the manufacturer cannot be
vaste aansluiting wordt gemaakt, dan heldliablefordamagesresultingfrom a
moet de toepassing via een schakelaar, missing or damaged earth wire [for
met alle polen. The contact distance in exampleanelectricalhazard].
switched-off condition must be at least
3mm. You can use auto-off switches, After installation, it must be secured
fuses and relays according to EN 60 335 that parts which are under electrical
regulations. tension,cannotbetouched.
Beforeinstallation,thepresentinstallation
data of the electrical network must be
compared with those on the type plate
[voltage and frequency]. These data must
becorresponding.
!

Oneormorezoneshavebeenswitched-
4.2Helpfultips off
The safety system may have interefered
Make sure that the pans are positioned in because:
the middel of the zone while cooking, -youforgottoswitch-offthecookingzone.
because of the automatic pan detection -oneormoreswitchesarecovered.
sytemintegratedinthezones. -the pan is empty and the bottom is
overheated.
Repairs to electrical appliances may only -The appliance also has an automatic
be executed by certified professionals. power reduction and emergency stop in
Inexpert executed repairs cause danger caseofanoverload.
fortheuser.
Ventilatorcontinuesafterswitching-off
4.3Troubleshooter thezone
-Thisisnotanerror,theventilatorprotects
Theapplianceisnotworking the electronics from overheating. After
-Faulty connection to the electrical cooling down sufficiently, the ventilator
network. willautomaticallystop.
-Afuseorstophasinterfered.
-Thelockfunctionisactivated. The automatic cooking function does
-There is water or grease on the control notwork
keys. -Thecookingzoneisstillhot,code”H“.
-Foractivation thehighest powerposition
Code”U” hasbeensetto”9”.
-There is no pan placed on the cooking
zone. OnthedisplayIcansee3or4”L“codes
-The pan is not suitable for induction -Seechapter3,lockfunctionisactivated.
cooking.
-The pan bottom diameter is too small for OnthedisplayIcanseea”U“code
thezone. -See chapter 3, warming fucntion is
activated.
Code”C“or“E“
-Call your supplier for a repair and clearly OnthedisplayIcanseethecode||
mentiontheerrorcode. -See chapter 3, pause function is
activated.
EN 16 Troubleshooter
Chapter 5
EN 17 Installation
Ratedload:
5.1Electricalinstallation Seetypeplateonyourappliance.
The i-Cooking appliance may only be Connection:
connected to an effectively grounded AC230V|50Hz
power socket. This power socket must
always remain freely accessible for Fuse:
possibleservicingpurposes. 10A[typeBorC]
The appliance may only be connected to
the electrical network by a certified Earthleakagecircuitbreaker:
electrician. He or she is aware of the According to EU regulations and
nationalandlocalregulationsofthepower guidelines,itisadvisorytofittheelectrical
company. Installation is only allowed on a house installation with an earth leakage
NEN1010certifiedinstallation. circuitbreaker[30mA].
The manufacturer cannot be
Ifthepowersocketisnotaccessible,orin held liable for direct and/or
caseofapermanentelectricalinstallation, indirect damages, resulting from an
it must be possible to disconnect the inexpert installation or incorrect
appliancefromtheelectricalnetworkviaa connection.
switch, with all polesWanneer het
stopcontact niet toegankelijk is of er een Moreover, the manufacturer cannot be
vaste aansluiting wordt gemaakt, dan heldliablefordamagesresultingfrom a
moet de toepassing via een schakelaar, missing or damaged earth wire [for
met alle polen. The contact distance in exampleanelectricalhazard].
switched-off condition must be at least
3mm. You can use auto-off switches, After installation, it must be secured
fuses and relays according to EN 60 335 that parts which are under electrical
regulations. tension,cannotbetouched.
Beforeinstallation,thepresentinstallation
data of the electrical network must be
compared with those on the type plate
[voltage and frequency]. These data must
becorresponding.
!

EN 19 Installation
1. Carefully unpack all components and 7. Do not use extension cables to
check them on possible damage. connect the appliance.
2. Before putting the appliance into use, 8. This appliance may not be placed
it must be fully finished and installed in above a dishwasher or tumble dryer: the
a kitchen environment and in a suitable steam may damage the electrical
worktop material. system and may lead to dangerous
3. This appliance is only for the situations.
domestic preparation of food. Any other
use is prohibited.
4. Remove before use all labels and Important: This appliance
stickers which are on the ceramic glass needs sufficient ventilaton.
induction plates. Consider this during the installation;
5. The induction zones and control panel make sure that the ventilation
may not be used as working or storage apertures are in line with the air
tops. supply apertures in the cabinet.
6. The appliance must be earthed and After building the appliance in, it must
connected in accordance with the local be secured that parts which are under
regulations. electrical tension, cannot be touched.
!
20mm min
50mm min
removable
55mm min
20mm min
50mm min
removable
Makesureduringinstallationanduse,that
there is no tensile stress on components
andwires.
Therequiredwiringdiagramareprintedon
the stickers on both the wires as the
powerunit.
Installation to the electrical network must
bedonewithearthedpowerplugs.
A fuse must always be placed between
the appliance and the electrical network
likeaearthleakagecircuitbreaker,fuseor
stop.
Installationofthecookingzones Installationexample
For the various installation methods, use
the brass connectors whic are placed in
thepowerunit.
Attention!
Alwaysconnecttheearthwire.
Act in accordance with the wiring
diagram,whichcanbefoundonthepower
unit.
Thisappliancecanonlybeusedona
230V~50Hzelectricitynetwork.
De electrical connections of the power
unitareontheunderside,attherear.Usea
screwdrivertoopentheclipofthelid.
7
7
C55
5-6-7-8
5
c
5
5-6-7-8
Country electrical tension connection wire diameter fuse
NL 230V~50Hz 2x fase+earth 5x1.5mm2 2x16A
GB 230V~50Hz 1 fase+earth 5x2.5mm2 25A
EN 20 Installation

EN 19 Installation
1. Carefully unpack all components and 7. Do not use extension cables to
check them on possible damage. connect the appliance.
2. Before putting the appliance into use, 8. This appliance may not be placed
it must be fully finished and installed in above a dishwasher or tumble dryer: the
a kitchen environment and in a suitable steam may damage the electrical
worktop material. system and may lead to dangerous
3. This appliance is only for the situations.
domestic preparation of food. Any other
use is prohibited.
4. Remove before use all labels and Important: This appliance
stickers which are on the ceramic glass needs sufficient ventilaton.
induction plates. Consider this during the installation;
5. The induction zones and control panel make sure that the ventilation
may not be used as working or storage apertures are in line with the air
tops. supply apertures in the cabinet.
6. The appliance must be earthed and After building the appliance in, it must
connected in accordance with the local be secured that parts which are under
regulations. electrical tension, cannot be touched.
!
20mm min
50mm min
removable
55mm min
20mm min
50mm min
removable
Makesureduringinstallationanduse,that
there is no tensile stress on components
andwires.
Therequiredwiringdiagramareprintedon
the stickers on both the wires as the
powerunit.
Installation to the electrical network must
bedonewithearthedpowerplugs.
A fuse must always be placed between
the appliance and the electrical network
likeaearthleakagecircuitbreaker,fuseor
stop.
Installationofthecookingzones Installationexample
For the various installation methods, use
the brass connectors whic are placed in
thepowerunit.
Attention!
Alwaysconnecttheearthwire.
Act in accordance with the wiring
diagram,whichcanbefoundonthepower
unit.
Thisappliancecanonlybeusedona
230V~50Hzelectricitynetwork.
De electrical connections of the power
unitareontheunderside,attherear.Usea
screwdrivertoopentheclipofthelid.
7
7
C55
5-6-7-8
5
c
5
5-6-7-8
Country electrical tension connection wire diameter fuse
NL 230V~50Hz 2x fase+earth 5x1.5mm2 2x16A
GB 230V~50Hz 1 fase+earth 5x2.5mm2 25A
EN 20 Installation