ABK PA-2083M User manual

1
OWNER’S MANUAL
Before operating, please read this manual completely.
PA-2083M
Monitor Panel
FEATURES
10CH inputs.
Volume control.
A display screen is provided for the quick and easy visual monitoring
of input level.
Build in monitor speaker.

2
Left blank for memo

3
FRONT PANEL
① Power switch (1 is power on and the “power LED” is on )
②MonitorSpeaker ③Display screen
④Leftshiftkey ,⑤ Right shift key
⑥ Volume control
REAR PANEL
③
①②
① 1~10CH input terminals ② AC power cord ③ AC fuse.
CONNECTIONS
①②③④⑤ ⑥
ABK
Matrix PA-2084B/D
FROM AMP.OF
P.A.SYSTEM
To indirect speaks

4
OPERATION
1 Make connections as shown above then turn on the power.
2 Select channel which you want to monitor with Right shift key or Left shift key. Speaker on the
front panel will sound with a red LED lit.
3 Control the volume with Volume controller on front panel. The level of every channel doesn`t regard
the volume.
SPECIFICATIONS
Channels 10, switchable
Inputs 70 ~ 100 V, 10 kΩ
Output 65 dB SPL Variable
Frequency response 100 Hz---15 kHz
Signal to noise ratio 80 dB
Speak Build in
Protection AC fuse ×1
Power Requirement AC 220 –240 V/ 50～60 Hz
Dimensions 485×88×378 mm
Gross weight 6.5 kg
Net weight 5.2 kg
Specifications are subject to be changed without notice.
CAUTION
● When the “Power switcher”is off, please pull out the power cord from the socket.
● Please keep the equipment out of water.
● To reduce the risk of electric shock, do not remove the cover.
●No user parts inside. Refer servicing to qualified service personnel.
DSPPA ACOUSTIC TECHNOLOGY CO.LTD.