Massage vigorously the place of blood
sampling.
Firmly press the lancing device to the ngertip
and press the release button. Click sound
means that the puncture has been performed.
Before performing the test, wash your
hands thoroughly and dry them.
Put down the date when the vial has been
rstly opened. Remove the strip from vial
and tightly seal the cap. Put down the date
of the rst vial opening.
Apply the glucose meter with a strip to a
drop of blood. Blood will be automatically
sucked into the test strip.
Insert a test strip. You will hear the beep
sound and moving lines will appear on the
screen.
A ashing means that the device is
ready to take a blood sample. Use and
, to mark a test as pre-meal or
post-meal .
5. PERFORMING A TEST
14
23
7
Diagnosis S.A.,
ul. Gen. W. Andersa 38A,
15-113 Białystok, Poland
www.diagnosis.pl Rev. 2021.01.25 v0
56
Make sure that the conrmation window
is completely lled with blood.
Glucose meter will display your result and
save it automatically in the memory.
Glucose meter will automatically turn o
after removing the test strip.
8
910 11
As soon as the conrmation window will be
lled with blood, the glucose meter will start
counting down from 5 to 1.
