Absco Industries 1208WSK User manual

ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
773mm
1140mm
LENGTH: 1.22m DEPTH: 0.87m HEIGHT: 1.15m
We thank you for choosing an Australian made shed
For further assistance please visit our detailed instructional video library at
http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE
Please let us know what you think of our instructions
Feedback makes us better
[email protected]
Absco Industries
Wood Store Model: 1208WSK
PAGE 01

·The surface on which this product is to be installed must be level. An uneven
surface may result in misalignment of parts.
·Anchor sets are not supplied as standard items with this product. Use of
anchors appropriate for the surface beneath is highly recommended.
·Before commencing any assembly, read through these instructions in detail
to gain a thorough understanding of assembly methods and associated
details.
·Unpack the carton and carefully identify and check off all the parts against
the parts described and illustrated on "COMPONENTS PACKING LIST" pages.
·Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes.
·Covered shoes are highly recommended.
·Do not assemble this product in windy conditions.
·Ensure that this product is securely anchored to the surface beneath
immediately after construction is completed.
GENERAL INSTRUCTIONS
SITE PREPARATION
TOOLS REQUIRED
SAFETY NOTES
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 02

SNAPTiTE SHEET
STRAIGHT
1130x773mm
SH44A
SNAPTiTE SHEET
STRAIGHT
865x773mm
SH44B
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 03
1208WS CHANNEL PACK
MAIN PACK CARTON (1 OF 1)
QTY QTY
DESCRIPTION PART # CHK CHKDESCRIPTION PART #
1
1INSTRUCTIONS
& FITTINGS PACK INSTP##1208WS
1
1208WS
CHANNEL PACK 1208WSCP
2
2
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
SNAPTiTE SHEET
STRAIGHT
1108x773mm
SH44C
CHANNEL
1130mm
STRAIGHT
CH68A
CHANNEL
1130mm
STRAIGHT
CH68B
CHANNEL
773mm
STRAIGHT
CH68C
CHANNEL
1217mm
STRAIGHT
CH68D
CHANNEL
865mm
STRAIGHT
CH68E
CHANNEL
1108mm
STRAIGHT
CH68F
CHANNEL
1108mm
STRAIGHT
CH68G
2
6
2
2
1
1
2
INSTRUCTIONS & FITTINGS PACK
8G x 3/8" SELF
TAPPING SCREW FAST001 INSTRUCTION MANUAL IM
100
BRACING
STRIP
1600x20mm
BKT21
BRACING
STRIP
1140x20mm
BKT22
BRACING
STRIP
1375x20mm
BKT23
2
1
2

FASTENING SYMBOLS
The snaptite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners.
To assemble each panel, the perimeter
channels are secured to the top and
bottom of each panel using the snaptite
system, as detailed on the following
pages wherever you see this symbol.
TIP: Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush with the
edges of the sheets.The snaptite system allows
adjustment for this process by simply tapping the
channel along the sheets until each end is neatly
flush. If you need to remove channels from the
panels, pull the channel along the panel from
opposing ends. You may need someone to help
with this.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After fastening sheets together, position the channel over one end of the sheets.
Gently tap it over the SNAPTiTE lugs, working along the sheets to the other end.
HIGH SIDE
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
Join components together by pre-drilling the holes first.
Use one component as a template to mark where the
holes are. Drill with 3mm drill bit.
D
SNAPTiTE ASSEMBLY GUIDE
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 04

D
D
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 05
LEFT PANEL SIDE PANEL ASSEMBLIES RIGHT PANEL
SHELF PANEL ASSEMBLY
68B
44A
68A
68C
68C
68B
68A
44A
68C
68C
NOTE HOLES POSITIONS ILLUSTRATED NOTE HOLES POSITIONS ILLUSTRATED
DD
D
68G
44C
68F
68C
68C
D
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i

D
NOTE HOLES POSITIONS ILLUSTRATED
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 06
ROOF PANEL ASSEMBLY
NOTE HOLES POSITIONS ILLUSTRATED
44B
44B
68E
68E
68D
68D
SNAP
T TE
i
SNAP
T TE
i
D

NOTE HOLES POSITIONS
ILLUSTRATED
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 07
PANEL CONSTRUCTION
68B
68B
68G

BKT22
IT IS HIGHLY RECOMMENDED THAT THE WALLS OF YOUR 1208WSK WOODSTORE BE SECURED
DOWN ONTO THE SURFACE BENEATH.
FIT SCREWS, ANCHORS OR PEGS THROUGH THE PRE-PUNCHED HOLES ON THE BOTTOM
CHANNELS ON EACH SIDE WALL - HOLES MAY NEED TO BE DRILLED OUT.
replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled
three business days to advise you of the assessment outcome of the claim, which may include your expenses incurred in making
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 08
ANCHORING LOCATIONS
LOCATION OF 4
HOLD DOWN
ANCHORS
FINAL CONSTRUCTION
USE A PAIR OF TINSNIPS
OR SIMILAR TOOL TO
TRIM OFF THE CORNERS
OF ALL BRACING STRAPS
DRILL 1x Ø3mm HOLE 10mm IN FROM
EACH END OF ALL BRACING STRAPS
D
BKT23
BKT23
BKT21
BKT21

AUSTRALIA PRODUCT WARRANTY AGAINST DEFECTS
Congratulations on your purchase of an ABSCO SHED
ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using
high quality Australian made steel.
We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 30 years from date of
purchase, when installed within Australia.
This warranty does not apply to surface deterioration of panels caused by 'Swarf” (Tiny particles of steel debris left from cutting,
grinding or drilling operations) that has not been removed after building construction, or as a result of contact with damp soil,
chemicals, fertilisers or other corrosive substances.
This warranty covers any Absco product used for normal domestic use and installed in accordance with the installation
instructions. The warranty does NOT cover Damage caused by storms, wind, rain snow or poor foundations.
This warranty does NOT cover ABSCO products installed in severe coastal, industrial or other highly corrosive environments. The
warranty does not cover fasteners (screws, nuts, bolts, rivets, hasps or sliding padbolts).
The warranty is limited to replacement and delivery of components and does not include any labour or installation costs. The
benefits given by the warranty are in addition to your other rights and remedies under a law in relation to the goods or services
to which the warranty relates.
The warranty applies to the exclusion of all other representations, guarantees or warranties express or implied, our goods come
with guarantees that cannot be excluded under the Australian consumer law and is not transferable. You are entitled to a
replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods fail to be of an acceptable quality and the failure does not amount to a
major failure. For further information go to http://www.consumerlaw.gov.au.
Please retain a proof of purchase (sales docket or invoice) or register your warranty within 30 days of purchase here:
www.absco.com.au/register_warranty.php
In the unlikely event a warranty claim is made, it must be supported by photographic evidence and details of the defect,
including component part numbers, together with proof of purchase documentation (or on-line registration of purchase) and
forwarded to the address below. Upon receipt of the warranty claim, the Customer Service Manager will contact you within
three business days to advise you of the assessment outcome of the claim, which may include your expenses incurred in making
the claim.
THE CUSTOMER SERVICE MANAGER, ABSCO INDUSTRIES, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110
PHONE: [phone] FAX: [phone] EMAIL: [email protected]
Issued 01 January 2013
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018
Absco Industries
Wood Store Model: 1208WSK
PAGE 09