Abt 1654-75206-DKW1 User manual

ASSEMBLY INSTRUCTION
Item# 1654-75206-DKW1 Friendship Table
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people.
Diagram 1
Note:
Height of this table can be adjusted with or without extension block. (30” and 36” heights)
Assembly steps with extension blocks:
1 .Attach bottom stretcher (I) and middle stretcher (J) to legs (F) by inserting bolts (E),
lock washers (C) and flat washers (D), tighten with Allen wrench (A) (See Diagram 1)
2 .Attach base frame (F) to table top (K) by inserting bolts (B), lock washers (C) and flat
washers (D), tighten with Allen wrench (A) (See Diagram 1)
3. Turn table upright.
1/3

Assembly steps without extension blocks:
Diagram 2 Diagram 3 Diagram 4
Diagram 5
1. Unscrew bolts (B), lock washers (C) and flat washers (D) by Allen wrench (A) from mounting
bridge (H) (See Diagram 2)
2. Remove extension blocks (G) from legs (F) by unscrewing bolts (E) lock washers (C) and flat
washers (D) in counter clockwise direction with care. (See Diagram 3)
3. Attach mounting bridge (H) to legs (F) by inserting bolts (B), lock washers (C) and flat
washers (D), tighten with Allen wrench (A). (See Diagram 4).
4. Attach bottom stretcher (I) and middle stretcher (J) to legs (F) by inserting bolts (E),
lock washers (C) and flat washers (D), tighten with Allen wrench (A) (See Diagram 5)
2/3

5. Attach base frame (F) to table top (K) by inserting bolts (B), lock washers (C) and flat
washers (D), tighten with Allen wrench (A) (See Diagram 5)
6. Turn table upright.
Instruction for table leaves:
1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 6
.
Diagram 6
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
3/3