Abtus AV483-L360A User manual

ABtUS SINGAPORE PTE LTD www.abtussingapore.com
ABtUS SIGAPORE PTE LTD www.abtussingapore.com
ABtUS SINGAPORE PTE LTD www.abtussingapore.com
Plasma/ LCD
Display Tilt
Wall Mount
Model: AV483-L360A
SPECIFICATION
Plasma Size : Suitable for 23” to 42”
Wall Plate Dimension : 430mm (16.9”) x 175.4mm (6.9”)
Length of Hook : 232mm (9.1”)
Tile Angle : 12 degrees
Distance from Wall : 50mm (1.97”)
Load Capacity : 36kg (80 lbs)
** For details and updated Command and Program Software, please visit and download from www.abtussingapore.com
*Specications are subject to changes without notice.
Revision 20.03.2019

*Specications are subject to changes without notice.
User Operation Guide
Step-2
Step-3 Diagram A
OR
Step-1
COMPONENTS
INSTALLTION
INSTALLATION
Step 1: Insert Side Brackets (c) into Rectacgular Tubes (a).
Step 2: Secure with Self Tapping Screws (e) provided.
Step 3: Fix Tilt Brackets (d) onto Side Brackets (c) on left and right side with Cap screws (f),
and Washers (g)
Note: use inner hole for a closer space between wall and Plasma without tilting function
(see Diagram A)
Step 4: Fix Hooks (b) on to back of Plasma TV with screws (i), (j) or (k)
Note: if screws provided can;t t, please refer to the Plasma TV user manual for the correct
mounting thread screw size.
Step 5: Fix Bracket onto Wall (not shown). Lift and hook Plasma TV onto Bracket.
Step 6: Secure Plasma TV with Hook with screws (h) provided.
NOTE: Do consult a qualied and authorized service technician if you encounter any technical
di󰀩culties. We are not liable for any damage or injuries arising from any improper installation or
mishandling. Now, enjoy your Plasma TV unit !!
(a)
Rectangular Tube - 2pcs
(b)
Hook - 2pcs
(c)
Side Bracket - 2pcs
(d) Tilt Bracket Right/Left
- 1 pc each
(e) Self Tapping
Screw - 4pcs
(f)
Cap Screws - 4pcs
(g)
Washers - 4pcs
(h) M4 x 35 Screws - 2 pcs (i) M4 x 15 Screws
- 6 pcs
(j) M5 x 15 Screws
- 4 pcs
(k) M6 x 15
Screws - 4 pcs
Plasma TV
Hook
Step-4
Step-5
Step-6