AC Infinity CLOUDFORGE User manual

1
USER MANUAL
CLOUDFORGE
ENVIRONMENTAL HUMIDIFIER

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
MANUAL CODE CF2311X1
MODEL
AC-CFT3
AC-CFT5
AC-CFT7
AC-CFT9
PRODUCT
CLOUDFORGE T3
CLOUDFORGE T5
CLOUDFORGE T7
CLOUDFORGE T9
UPC-A
819137023611
819137023635
819137023628
819137023642

5
MANUAL INDEX
Manual Index .................................................................................
Product Warning ............................................................................
Key Features .................................................................................
Product Contents ...........................................................................
Installation .....................................................................................
Powering and Setup ......................................................................
UISTM Platform ...............................................................................
Connecting to UIS™ Controllers ...................................................
Cleaning ........................................................................................
Programming .................................................................................
Other Settings ................................................................................
Other AC Infinity Products .............................................................
Warranty ........................................................................................
Page 5
Page 6
Page 7
Page 8
Page 9
Page 16
Page 20
Page 21
Page 22
Page 24
Page 35
Page 37
Page 38

6
Ensure your power source conforms to the electrical requirements of this product.
Read all instructions before installing and using this product.
Only use distilled water, and do not pour water into the central pipe. This will prevent your
humidifier from functioning properly.
Do not attempt to hardwire this product. Performing any retrofitting actions may result in
personal injury and/or electrical damage, and will void this product's warranty.
Be careful not to damage or cut the wire insulation (covering) during the installation. Do not
permit wires to come in contact with any sharp edges.
This product must not be used or placed in potentially hazardous locations such as flammable,
explosive, electrical, or chemical-laden atmospheres.
Do not cover any power cords with rugs or other fabric materials.
Safety precautions should be exercised during the installation, operation, and maintenance of
this product.
Do not block or tamper with this product in any manner while it is in operation as it may cause
electric shock, fire, or damage to this product.
Do not depend on the on/off programming as the sole means of shutting power from this
product. Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped,
or is damaged in any manner.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:

7
KEY FEATURES
TARGETED ZONE
Includes a directional cap and
stretchable tube, or pipe and
nozzles, for various humidity
distribution methods in spaces like
grow tents, DIY grow rooms, living
spaces, and greenhouses.
SMART CONTROLLER
Onboard controller with LED touch
interface featuring humidity balance
programming. Pair with UIS controllers
to access intelligent programming and
app control with advance automation
and data charts.
PRECISION DETECTION
Swiss-made thermal alloy sensor
with a waterproof gasket made of
SAE grade-316 steel detects humidity
changes and provides up-to-the-
minute readings. Extension cord
enables detection in spot areas and
convenient humidifier placement.

8
PRODUCT CONTENTS
CLOUDFORGE T3
4.5L
HUMIDIFIER
(x1)
FLEXIBLE
HOSE
(x1)
CLOUDFORGE T7
ALL MODELS
PROBE
MOUNT
(x1)
NEBULIZER
BRUSH
(x1)
HOOK AND
LOOP TIE
(x1)
UIS EXTENSION
CORD (M-M)
(x1)
SENSOR
PROBE
(x1)
15L
HUMIDIFIER
(x1)
5-WAY
NOZZLE
(x1)
ELBOW
NOZZLE
(x1)
PIPE
BASE
(x1)
PVC
PIPE
(x1)
FLEXIBLE
HOSE
(x1)
ELASTIC
BANDS
(x4)

9
INSTALLATION
CLOUDFORGE T3
STEP 1
Add water into the tank.You may detach the tank to fill it with water.
We recommend using distilled water to reduce the amount of mineral build-up.
NOTE: Do NOT pour water into the central pipe. This will prevent your
humidifier from functioning properly.
1 2

10
INSTALLATION
CLOUDFORGE T3
STEP 2
You may swap the directional flow cap with the included flexible hose for extended targeted flow.
1 2

11
ROUTING THE HOSE
Do not bend the hose in a U-shape. Doing so will result in water pooling, which will spill into
puddles and block humidity from emitting. This will also result in water flowing back into the base,
which can overflow it and cause leakage.
In addition, make sure the hose is sloped upwards when routing it to your grow tent. Sloping the
hose downward will result in condensation building up in the hose. This may further result in water
dripping out and creating a puddle.
Dry the hose after each use.
INSTALLATION
CLOUDFORGE T3

12
INSTALLATION
CLOUDFORGE T7
STEP 1
Add water into the tank.You may detach the tank to fill it with water.
We recommend using distilled water to reduce the amount of mineral build-up.
1 2
NOTE: Do NOT pour water into the central pipe. This will prevent your
humidifier from functioning properly.

13
STEP 3 — PIPES
Attach the pipe into the base, followed
by your choice of nozzle:
• Elbow nozzle* for unidirectional flow
• 5-way nozzle for omnidirectional flow
*Make sure the elbow nozzle is placed over the pipe with the interior ridge
facing the ground.
OR
INSTALLATION
CLOUDFORGE T7
STEP 2
Top the center lid opening with the included base.
You may install either the included hose or pipe
to extend the reach of your humidifier.

14
INSTALLATION
CLOUDFORGE T7
USING YOUR OWN PIPES
You may use your own PVC pipes to extend the
reach of your humidifier.
Line the pipe with the included elastic band and
attach it to the base or elbow nozzle.
OR

15
STEP 3 — HOSE
Attach the flexible hose to the base for targeted flow.
ROUTING THE HOSE
Do not bend the hose in a U-shape. Doing so will result in water pooling, which will spill into
puddles and block humidity from emitting. This will also result in water flowing back into the base,
which can overflow it and cause leakage.
Dry the hose after each use.
In addition, make sure the hose is sloped upwards when routing it to your grow tent. Sloping the
hose downward will result in condensation building up in the hose. This may further result in water
dripping out and creating a puddle.
INSTALLATION
CLOUDFORGE T7

16
POWERING AND SETUP
CLOUDFORGE T3
STEP 1
Plug the sensor connector with the gasket into
the 3.5mm jack located at the rear side.
The gasket is specially designed to protect
against liquids and dust.
Route the probe head to spot areas as needed.

17
POWERING AND SETUP
CLOUDFORGE T3
STEP 2
You may plug the included UIS extension cord
into the rear side port to connect your humidifier
to your UIS controller.
Plug the UIS connector with the gasket end
into your humidifier. The gasket is specially
designed to protect against liquids and dust.
STEP 3
Plug your humidifier's power plug into an outlet
to power it.

18
POWERING AND SETUP
CLOUDFORGE T7
STEP 1
Plug the sensor connector with the gasket into
the 3.5mm jack located below the display screen.
The gasket is specially designed to protect
against liquids and dust.
Route the probe head to spot areas as needed.
You may also use the included probe mount to
cable manage the corded probe.

19
POWERING AND SETUP
CLOUDFORGE T7
STEP 3
Plug your humidifier's power plug into an outlet
to power it.
STEP 2
You may plug the included UIS extension
cord into the front side port to connect your
humidifier to your UIS controller.
Plug the UIS connector with the gasket end
into your humidifier. The gasket is specially
designed to protect against liquids and dust.

20
UISTM PLATFORM
The UISTM platform enables you to connect a single central controller with several grow devices
simultaneously. By creating this fully integrated system, you can power and program all your
devices together or separately for optimized grow tent management.
Your grow system can be regulated using your controller hub or remotely on the AC Infinity app
(paired with compatible controllers), where you will have access to automation programming and
climate data.
You can also connect your favorite grow light and outlet device to integrate them into the UIS
platform using our RJ11/12 adapter and control plug module.
Grow devices will be sold separately and may still be in development
at the time of your purchase of this product.