ACCELERATE 87487 User manual

1
Wireless Charger
PRODUCT CODE: 87487
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE

2
Getting started
Remove the product from the box.
Remove any packaging from the product.
Please retain all packaging after you have checked and counted all the parts and
the contents against the list.
Package Contents
Wireless Charging Pad
USB cable
Instruction Manual
Key Features
Convenient and fast charging
Wireless charger: Now, charge your phone by placing it on the pad. No need to
attach any cable to your phone.
Built-in Blue LED indicator for charging
Compatible with Qi Integrated phones like iPhone 11, iPhone 11 Pro, iPhone 11
Pro Max, iPhone XS, iPhone XS Max, iPhone XR, iPhone X, iPhone 8/8 Plus,
Samsung Galaxy S10/S10+, S9/S9+, S8/S8+, S7/S7 Edge, S6 Active, Note 5, Nexus
5/6/7, Nokia, HTC, Motorola, LG, Sony and More
Safety Instructions
Keep the unit away from heat sources, direct sunlight, humidity, water and any
other liquids.
Do not operate the unit if it has been exposed to water, moisture or any other
liquids to prevent against electric shock, explosion and/or injury to yourself and
damage to the unit.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified
electrician. Improper repairs may place the user at serious risk.
Do not use the unit with wet hands.
Do not put objects into any of the openings.
Keep the unit free from dust, lint etc.
Do not use this unit for anything other than its intended use.
Keep the unit out of reach of children.
This product is not a toy.

3
Description of Parts:
INSTRUCTIONS FOR USE
Charging Instructions
Connect the USB cable (included) to a power outlet rated DC 5V 2A, and the
Micro USB plug to the Micro USB input of the Wireless Charging Pad. Red LED
indicator turns on.
Place your Qi Integrated phone on the non slip pad, and wireless charging of the
phone will start immediately with auto-change of Blue LED indicator light
intensity.
Care and Maintenance
Read the following recommendations before using the product. Following these you
will be able to enjoy the product for many years.
Do not expose the Wireless Charging Pad to liquid, moisture or humidity to avoid
the product’s internal circuit being affected.
Don’t use abrasive cleaning solvents to clean the device.
Do not expose the device to extremely high or low temperature as this will
shorten the life of electronic devices, destroy the battery or distort certain plastic
parts.
Don’t dispose of the device in a fire as it will result in an explosion.
Don’t expose the device to contact with sharp objects as this will cause scratches
and damage.
Don’t let the device fall on the floor. The internal circuit might get damaged.
Don’t attempt to disassemble the device as it may get damaged if you are not
professional.
In case the device doesn’t function properly, send it to the store you bought it. The
staff will help you to the problem.

4
Specifications
Input: DC 5V/2A
Output: DC 5V/1A
Dimension: Dia. 9.8 x 9.8 (H) cm
Weight: 65g (approximately)
Information on Disposal for Users of WEEE
The wheelie bin symbol on the product(s) and / or accompanying documents means
that used electrical and electronic equipment (WEEE) should not be mixed with
general household waste. For proper treatment, recovery and recycling, please take
this product(s) to designated collection points where it will be accepted free of
charge.
Alternatively, in some countries, you may be able to return your products to your
local retailer upon purchase of an equivalent new product.
Disposing of this product correctly will help save valuable resources and prevent any
potential negative effects on human health and the environment, which could
otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest designated
collection point
Produced in the PRC for TJ Morris LTD, L11 0JA, UK
Maxi Save Pty Ltd, 24 Bulwer St,
Maitland, NSW 2320,Australia

5
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
RF Exposure Information
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
This device complies with Part 18 of the FCC Rules. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
(1)Increase the separation between the equipment and any other radio device.
(2)Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.