Accell J135C-003B Manual

MHL to HDMI Adapter
Instructions for use
1. With the power to the TV off, connect an HDMI cable from the HDMI port on
the MHL adapter to your HDMI TV or other HDMI de ice.
Note: Supplying power to the connected MHL source de ice will allow the source
de ice to remain charged while being used. Use the charger supplied or
appro ed by the manufacturer of your mobile de ice.
2. If power to the MHL de ice is desired, connect the USB Micro-B cable from
your mobile de ices supplied tra el charger to the CHARGE port on the side of
the adapter. See note below.
3. Plug your mobile de ice’s supplied tra el charger into a power source.
4. With the MHL enabled de ice turned off, connect the MHL adapter’s USB
Micro-B connector to the MHL enabled source de ice.
5. Turn on the TV and MHL source de ice.
6. Configure the TV to the HDMI input being used. Refer to the TV’s instructions
for more information.
7. If needed, configure your MHL enabled de ice to output audio and/or ideo
through the MHL connector. Refer to the source de ice’s instruction manual for
more information on enabling the MHL output.
Note: The use of a power adapter is dependent upon the source de ice's ability
to supply power from its USB Micro-B port.