Accu-Scope SKYE WiFi 2 User manual

Manual
73 Mall Drive, Commack, NY 11725 • 631-864-1000 (P) • 631-543-8900 (F)
www.accu-scope.com • [e-mail]

AU-500-WIFI V1.3
Content
CHAPTER 1: NOTES AND SAFETY REQUIREMENTS--------------------------------------- 1 -
1.1 CAUTION AND NOTES ---------------------------------------------------------------------------- - 1-
CHAPTER 2: SOFTWARE SYSTEM REQUIREMENTS--------------------------------------- 2 -
2.1 SYSTEM REQUIREMENTS FOR USB WORK MODE ------------------------------------------- - 2-
2.2 SYSTEM REQUIREMENTS FOR WIFI WORK MODE ------------------------------------------- - 2-
CHAPTER 3: PACKING LIST ------------------------------------------------------------------------ 3 -
CHAPTER 4: FUNCTION INTRODUCTION ------------------------------------------------------ 4 -
4.1 NAME AND FUNCTION FOR BODY UNITS OF WIFI DIGITAL CAMERA ------------------------ - 4-
4.1.1 Body Introduction
： ------------------------------------------------------------------------ 4 -
4.1.2 Function for body units of WiFi Digital Camera-------------------------------------- 4 -
CHAPTER 5: PRODUCT ASSEMBLY GUIDE --------------------------------------------------- 6 -
5.1 WIFI DIGITAL CAMERA ASSEMBLY AND DISASSEMBLY --------------------------------------- - 6-
5.1.1 WiFi Digital Camera Assemble with Microscopes----------------------------------- 6 -
5.1.2 WiFi Digital Camera Disassembly ------------------------------------------------------ 8 -
CHAPTER 6: INSTRUCTIONS ---------------------------------------------------------------------- 9 -
6.1 USB WIRED WORK MODE ---------------------------------------------------------------------- - 9-
6.1.1 Install SKYE View™ 2 Software -------------------------------------------------------- 9 -
6.1.2 To Connect Device------------------------------------------------------------------------- 9 -
6.1.3 Open Software ------------------------------------------------------------------------------ 9 -
6.1.4 Start to Use ---------------------------------------------------------------------------------- 9 -
6.2 WIFI WORK MODE-IOS SYSTEM--------------------------------------------------------------- - 9-
6.2.1 Install SKYE View 2 app for iOS -------------------------------------------------------- 9 -
6.2.2 To Connect Device---------------------------------------------------------------------- - 10 -
6.2.3 Open Software--------------------------------------------------------------------------- - 10 -
6.2.4 Start to Use ------------------------------------------------------------------------------- - 10 -
6.3 WIFI WORK MODE-ANDROID SYSTEM ------------------------------------------------------ - 10 -
6.3.1 Install SKYE View 2 app for Android ------------------------------------------------ - 10 -
6.3.2 To Connect Device---------------------------------------------------------------------- - 10 -
6.3.3 Open Software--------------------------------------------------------------------------- - 11 -
6.3.4 Start to Use ------------------------------------------------------------------------------- - 11 -
CHAPTER 7: DISCLAIMER ----------------------------------------------------------------------- - 12 -
SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 1 -
Chapter 1: Notes and Safety Requirements
1.1 Caution and Notes
(1)
To avoid danger or damage incurred to the lens, do not touch the
lens or sensor directly with your fingers.
(2)
To avoid failure or electric shock hazard and so on, do not
disassemble or modify the internal structure of the device.
(3)
Do not plug in or unplug the USB port when hands are wet.
(4)
Do not use alcohol and other organic solvents to clean.
(5)
If the lens or sensor is dirty or damp, you should better use dry and
non-linen fabric or professional lens tissue to wipe them. To avoid
scratches on the surface, do not touch the lens with your fingers.
Wipe the lens or sensor lightly.
(6)
The products are not specifically designed for an outdoor use. Do
not expose it to outdoor environment without any protection.
Excessive temperature and humidity will damage the lens. Please
avoid using the product under the following environment: high
temperature or high humidity environment, places with direct
sunlight, dirt or vibration and places near heat source.
(7)
Please use and store in the following environment:
Operating temperature: -10°C ~ 50°C
Storage temperature: -20°C ~ 60°C
Operating Humidity: 30 ~ 80%RH
Storage Humidity: 10 ~ 60%RH
(8)
If any foreign matter, water or liquid enter into the device by accident,
disconnect the USB cable immediately. Please send it to the
maintenance center. Do not attempt to dry it yourself (e.g. with a hair
dryer).
(9)
To prevent microscope from being tipped over or dropped, please
put away the device's USB cables in use or standby.
(10)
To avoid electric shock by accident, please power off microscope
before you move your computer or laptop.
(11)
The cleanliness of the device lens will directly affect image quality on
the computer screen during preview. Artifacts like various circles or
spots on the screen may be caused by dirt on the lens. When
cleaning, please use professional lens tissue or other professional
detergent to remove the dirt on the lens.
(12)
Registered trademark and copyright: Copyright ownership of this
product belongs to ACCU-SCOPE Inc. No organizations or
individuals shall photocopy, print, or translate to another language
any part of this document without expressed written authorization by
ACCU-SCOPE.

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 2 -
Chapter 2: Software System Requirements
2.1 System Requirements for USB Work Mode
•Windows 7, 8, or 10. 64-bit only.
•Dual core 3 GHz or higher CPU
•USB 2.0 high-speed interface or USB2.0 compatible interface
•DVD-ROM driver (only needed when installing software)
•8G or more memory
•At least 10 GB available hard-disk space
2.2 System Requirements for WiFi Work Mode
•Android 5.0 or above for Android device.
•iOS 8.0 or above for iOS/Apple device.
•Wireless network hardware must support the 802.11n/ac protocol (5G
mode).

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 3 -
Chapter 3: Packing list
1. WiFi Digital Camera
2. USB Power Adapter

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 4 -
Chapter 4: Function Introduction
4.1 Name and function of body units of WiFi Digital Camera
4.1.1 Body Introduction:
WiFi Digital Camera:
Standard C-mount WiFi Digital Camera is also suitable for 23.3mm, 30mm and
30.5mm adapter rings, connects to microscopes in multiple ways; the new
5MP light-sensitive CMOS chip significantly reduces the image noise, provides
fast data transmission speed, excellent color rendition, clear image, and
storage convenience. Ideal for use in industrial production, teaching, material
analysis, clinical examination, machine vision, etc.
4.1.2 Function for body units of WiFi Digital Camera
①Antenna: External antenna.
②Toggle key:
Three positions:
Toggle left (WiFi Icon): wireless WiFi mode enabled.
Toggle middle (USB Icon): PC mode enabled.
Toggle right (switch Icon): Power off.
1. Note: Input rated current of 500mA under USB connection mode; input rated

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 5 -
current 1500mA under WiFi connection mode.
③C-mount thread: camera can be installed using a standard C-mount
microscope adapter; other adapters can be use to install the camera using
different microscope interfaces (refer to Chapter 5 for specifications).
④Dustproof Cover: remove before use. Provides dust prevention and chip
protection prior to installation.
⑤LED Lights:
Two color Lights:
●USB mode: Red lights
●WiFi mode: Flashing blue lights.
⑥WiFi signal switch/reset button hole
Note: The default WiFi output signal is 5G; 2.4G and 5G
signals can be switched by pressing the reset hole with
a straightened paper clip for 1-3 seconds.
Short press: press 1-3 seconds to switch WiFi signals (2.4G to 5G, and vice
versa)
Long press: more than 10 seconds, restores the default Settings
⑦USB line:USB power supply.

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 6 -
Chapter 5: Product Assembly Guide
5.1 WiFi Digital Camera assembly and disassembly
5.1.1 WiFi Digital Camera Assembly with Microscopes
1．Connect to Microscope with Standard C-Mount
(1) Unscrew the plastic dustproof cover at the bottom of the WiFi Digital
Camera. Remove the protective film off the filter in the cavity (See Picture
1).
(2) Screw the WiFi Digital Camera to other microscopes (Standard C-Mount)
(See Picture 2).
(3) Connect the camera to the computer and start the software.
Fig. 1 Fig. 2
2. Connect to Stereo Microscope
(1) Unscrew the dustproof cover of the WiFi Digital Camera, take the
protective film on the filter of the cavity.
(2) Connect the camera to C-mount adapter (for trinocular stereo microscope)
or eyetube adapter (See Fig. 3 and 4).
(3) Insert other end of camera adapter into trinocular port or into eyetube (Fig.
5. Remove eyepiece first).

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 7 -
Fig. 3
Fig. 4
Fig. 5

SKYE WiFi 2 Digital Camera (CAT # AU-500-WIFI2) User Manual https://accu-scope.com/
AU-500-WIFI2 V1.3
- 8 -
5.1.2 WiFi Digital Camera Disassembly
1. Disassembly with Standard C-Mount WiFi Digital Camera
(1) Turn off the software and unplug the USB cable.
(2) Remove the WiFi Digital Camera with C-Mount adapter from the
microscope.
(3) Remove the C-Mount adapter from the camera.
(4) Screw the plastic dustproof cover onto the C-Mount.
(5) Secure the WiFi Digital Camera to avoid dropping.
2. Disassembly with Stereo Microscope
(1) Turn off the software and unplug the USB cable.
(2) Remove the WiFi Digital Camera with adapter from the microscope.
(3) Remove the adapter from the camera.
(4) Screw the plastic dustproof cover onto the C-Mount.
(5) Secure the WiFi Digital Camera to avoid dropping.
(6) If the eyetube was used, replace the eyepiece.