ACCUR BA-100 User manual
My company reserves the right to change the design and specications for improving products without prior notice
Note: Product picture & dimensions are for reference only. Detailed information is in accordance with the nal product.
All the information are carefully checked , if any printing or translation errors occurred , my company will not bear the consequences
深圳市领马科技有限公司(监制)
Scan WeChat
RG终检01
BA 100
Global First
Operating instruction
BA-100 Function Brief
1SDI output standard testing pattern
2SDI monitor color calibration (work with CalMan 5
calibration software)
Attention
1.Use the assorted power adaptor
2.Away from heat, keep ventilated
3.Connecting (plug) equipment, pay attention
to esd protection
4.When equipment is on operation, note the
waterproof, as well as the water splashed down
Packing list：BA-100
Power adapter(12V 2A)
USB cable(A-Mini B)
＋ ＋
Hardware (interface/key) functions description
1Key functions description( ❷ )
KEY Short press Press for 3s
SMPTE Red LED turn on LUT OFF
cyclic switching
576 50i---1080 50i
12
3 4 5 6
2Interface functions description( ❶-❸-❹-❺-❻ )
❶.HDMI output
❸.SDI input
❹.SDI output
❺.USB data controlling port
❻.DC 12V IN
Green LED Turn on LUT ON
Note: HDMI signal output is the same as the “SDI - OUT”
Operation instruction and notes
1SDI/HDMI output standard testing pattern
Step2.Link BA-100 SDI OUT and SDI IN on the tested equipment
by coaxial cable, switch the signal channel of the device to SDI
mode, the tested pattern displayed.
Step3.Press the key“SMPTE”，“SDI OUT”signal output switches
between high denition(1080 50i)and standard denition(576 50i).
SMPTE RP 219 SDTV/HDTV
Step1.Plug the AC/DC adapter into the “ ”input in BA-100
SDI monitor color calibration
SDI
Monitor
SDI cable
USBcable USB cable
Meter BA-100
PC
Hardware equipment connection diagram
2
Calibration PC System Requirements:
● Windows® Vista™ or later with latest operating system updates
installed (recommended: Windows 7® or later)
Program software upgrade
MCU and FPGA program upgrade
Step1.copy the MCU and FPGA upgrade program to the root
directory under DISC U
Step3.Keep pressing the SMPTE key , power the BA-100, once
the SMPTE green light ash , release the SMPTE key , after
nishing the upgrade , ashing status disappear , if the light
ashing is always on , meaning MCU .FPGA upgrade failed
File name：Mcu***.bna，Fpga***.bnb
Such as：McuUpdateForLutLoader_150727.bna
FpgaUpdateForLutLoader_150727.bnb
BA-100 Technique Specication
1、SDI input distance , the testing of the breakdown point
(real testing data)
L-2.5CFB
L-2.5CHD
L-3CFB
L-4CFB
SMPTE 344M SMPTE 292M SMPTE 424M
SD-SDI
540Mb/s
HD-SDI
1.5Gb/s
3G-SDI
3.0Gb/s
M
139 54 36
168 66 46
179 68 46
216 82 55
Other cable transmission , refer to the below standard
Model/Distance
Belden 1694A
3G-SDIHD-SDISD-SDI
400M 160M 120M
● 2 GB RAM (recommended: 4 GB RAM)
● Microsoft® .NET Framework 4.6 or later
Note: for the use of the calibration software and the relating
notes , please refer toCalMAN for Ruige PCC use
instruction
OTG cable
Step2.connect the U disc with the BA-100 “ ” based on the
● 2 GHz processor (recommended: 2 GHz Dual Core Processor)
Criterion
Video format
Baud rate
Model/Unit M M
2、Time delay:40ns
3、SDI signal Eye Diagram testing and signal quality characteristic
parameter
576 50i 1080 50i
1080 60p
SDI digital signal quality characteristic parameter(testing)
SDI-OUT
SD-SDI HD-SDI 3G-SDI
Amplitude（mv）
Rise/Fall
Time
Timing jitter
（10Hz）
Alignment jitter
SD(1KHz)
HD(100kHz)
3G(100kHz)
801 783 786
0%/0% 0.6%/0% 1.2%/0.6%
678ps/
649ps
85ps/
83ps
94ps/
90ps
0.09UI
0.06UI
0.22UI 0.48UI
0.05UI 0.11UI
Note : Eye diagram testing use the
SDI cable from Canare L-3C2VS,
length is 300mm.
NOTE: the above technical parameter are all real testing value, but the relating data testing
can be affected by testing environment , SDI cable quality , transmission distance, maching
impedance, BNC connector.,etc , thereby , the related technical parameters will be subject
to the actual testing data based on customer 's use environment.
Video format
Interface
Over/Undershoot
LUT le loading(PC)
1RgLutLoadTool download
Method 2: login http://www.ruige.com/index/vpro/50.html”and
enter the “ Support ” UI , then click “RgLutLoadTool” to download.
Method 1: scan the right side QR code to download
“RgLutLoadTool”.
2Hardware Connection
Step1.connect the power adaptor with the “ ” input end of the BA-100
Step2.connect the BA-100 with the computer via the USB cable
3LUT le loading
Step1.Unzip the “RgLutLoadTool.rar” by clicking right button of the
mouse
Step2.Copy the LUT le(From_SLog2-SGumut_To_LC-709Type A
.cube)under the root directory of “RgLutLoadTool161215“
Step3.Double click “RgGenBoxLoad3DLut.exe”to pop-up the loading
window
Step4.After“请输入命令：->”input command“load:From_SLog2-
SGumut_To _LC-709TypeA.cube , and click “Enter” to conrm , then
shows : “Load Lut ...”, means loading ( if the le name is too long, you
can just copy the le name with the sufx )
Step5.Once the loading is nished , the command line will show the
character “Load Lut success”, means the LUT document loading is
successful
Note : Lut loading le name can not include the “blank space” and
the Chinese character.
Problem solution
1、When reading data , but no LED green light ash , please check
your U disc ,or change a new U disc.
2、If monitor can not display test/loading image
a:Please check whether monitor supports HD signal , if not ,
and just supports SD , press the “SMPTE”key to switch the
“SDI OUT” format into SD（576 50i）
c:Check monitor is set in SDI channel or not；
b:Check SDI cable connection well or not , and whether SDI
signal in/out is connected well or not
3、When calibration , “Source”、“Displays” can not set well
a:Please check USB cable connection well or not；
b:Please check whether the BA-100 driving le(.dll) is
installed well or not
Specication
Name：I MAGE PROCESSING SYSTEM
Model：BA-100
HDMI (Output × 1)
Input voltage：DC 12V 2A(jack plug)
Dimension：108.2(W) × 84.2(D) × 28.4(H)mm
Power consumption：6W(Max)
SDI (Input × 1，Output × 1)
Weight：0.7Kg(Including Packing and spare parts )
SDI IN：1080/24p/24psf/25p/30p/50i//60i/50p/60p
720/50p/60p、480i/576i
Interface type：Mini USB2.0( ) × 1
Table of contents
