ACME FlyCamOne User manual

Manual
Vers. 1.01
"FlyCamOne", “CarCamOne” and the “CarCamOne” Logo are registered trademarks of ACME the game company, Germany
© copyright 2010 by ACME the game company GmbH

2
Safety advice
WARNING:
Follow these instruction to prevent damage of
the unit:
DO NOT USE UNPROTECTED IF RAIN OR
WATER. PREVENT CONTACT WITH ANY
KIND OF LIQUIDS
USE RECOMMENDED ACCESSORIES
ONLY
DO NOT DISASSEMBLE
THERE ARE NO PARTS AT THE INSIDE
THAT NEED TO ME MAINTAINED
REPAIRS SHOULD BE MADE BY
QUALIFIED PERSONNEL ONLY
SERVICE & SUPPORT
ACME the game company GmbH
Industriestr. 10a
33397 Rietberg
Germany
Tel.: +49 5244 7000 70
service@flycamone.com
or
http://www.flycamone.com
WARNING LIPO BATTERY
Mishandling the battery may occur
explosion, fire and smoke including
damage of health or goods. It will also
reduce battery performance.
Never charge a damaged LiPo battery
pack.
Stop charging if the LiPo battery pack
is getting deformed (blown up).
Charge and store the LiPo battery pack
at a temperature of 0°C to 40°C –
avoid a temperature higher than 65°C
when discharging.
Do not shortcut – Risk of explosion and
fire!
CE Declaration
Herewith we declare that this item is in
accordance with the essential requirements and
other relevant regulations of the directive
2004/108/EC. A copy of the original declaration
of conformity can be obtained at the address
above.
WEEE Reg. Nr.: DE64989527
Information for disposal of crossed
Bin marked products
This symbol is marked on a product or
packaging, it means that the product including
the batteries must not be disposed of with your
general household waste. Only discard
electrical/electronic items in separate collection
schemes, which cater for the recovery and
recycling of materials contained within. Your
co-operation is vital to ensure the success of
these schemes and for the protection of the
environment.
This product uses LiPo batteries. LiPo batteries
are recyclable, and a valuable resource. To
dispose of the battery, remove it and take it to a
resource recovery facility.
ATTENTION!
The privacy of others is protected by law and should be taboo. The recording of
third party can be an illegal act. You are responsible for your acting.

3
Content of the Box
Please make sure set is complete before starting
FlyCamOne HD 720p
Docking Station Tripod Mount Handle Bar Mount Belt Clip
USB-Cable 10Pin – RCA Cable Manual

4
Preparation
Compensation for recorded content
ACME will not be responsible in any case for any consequential or direct problems that will
lead to a loss of recorded or edited data. Furthermore ACME will not guarantee the content in
case the recording or saving is not working properly. The above limitations are as well valid in
case the unit has been repaired.
Do not remove the micro SD Card while recording or saving. Do not switch off or take out the
battery before the recording has been stopped or as long there is access to the memory,
indicated by a rotating circle.
Protect the unit from extreme temperatures. Stop recording at temperatures less than minus
10°C and higher than 60°C. Remove the camera from the windshield/sucking pad in case
extreme temperatures might be possible!
It is known that forged accumulators which remarkably look like the original product are
offered for the sale again and again. Some of these accumulators are not equipped with a
proper protection circuit which would satisfy the regulations of the prevailing safety
regulations. These accumulators can perhaps lead to fires or explosions. We assume no
liability for accidents, damages or failures which result from the use of a forged accumulator.
Battery charging
The inside battery is not fully charged when being purchased.
Please charge the battery before you are going to use the camera
the first time!
Connect the Docking Station with your computer using the included
USB-cable and insert the camera to charge. The charging process
is indicated by the LED and is finished after about 2 hours.
Use the original USB-Cable or the optional available power adaptor
only to charge the camera.
Exchange the Battery
Battery lock
Battery cover
Slide the lock to the top position and remove the
cover. The battery is wire connected and can be
removed by careful pulling. Insert the new battery
the same way - take care of the polarization. Only
use original battery to prevent damage of the unit.
(Art.-No.: FCHD17)

5
Functional diagram
180° pivot able head
1”/ 25,4mm Display
Zoom
Release/OK Button
Control
Menu (M) Button
Port-Cover
On/Off Switch
Power/Charging LED
Eyelet
10-Pin ComPort
Mini USB 2.0
Micro SDHC Card Slot
Fixing Slots
Battery case
180° pivot able head
Lens
The 10-Pin com port has following setup:
- AV-Out
- 5V IN
- Signal IN for external start/stop (Motion detection)
Due to limitations in the technology of the display production, single or few dark or
light dots might appear. This is not a defect and will not have any impact to the
recorded video or photo!

6
Compatible Memory Cards
Only use Micro-SDHC-Cards rank „Class4“ or
higher. The camera can be used with cards up
to 32GB. The recommended cards are "FCO
Rapid Rush" cards at a minimum size of 8GB.
How to insert the SD Card
Remove the comport cover protecting the sockets and the
card slot. Slide in the card upside down - printed side to
the bottom - until it clicks in.
To remove press onto the visible edge of the card, so it will
get out by the spring mechanism.
The Panel
Zoom in
Zoom out
Up
Start / Stop / OK
Left / 3 seconds for full screen
Right / 3 seconds to flip the picture 180°
Menu / 3 seconds for setup
down
The buttons placed at the right side of the camera will guide you through the functions of
the camera - "Left" and "Right" as well as the button "M" do have a double key mapping.
Press those for 3 seconds to get the second command.
Start the Camera
On/Off Press the button at the left side of the cam
to start the camera. FlyCamOne will be
displayed at the beginning.
.

7
Mode selection
The camera starts in external mode that can be used directly for recording. Use the cross
pad’s „up“and „down“buttons to change the mode.
Video
Photo
External
Play
Select the mode with the cross pads, confirming by pressing
“Start”. For details in the selected mode go further on pressing
the “M“button.
Following menus appear:
Video
Standard
15Min
30Min
45Min
60Min
Speed
Select the running time of the recording. Confirm selected mode
with «Start". Leave the submenu by pressing the “left” button.
Speed is the speed recording mode with only one frame per
second – specially used for nature recordings. Recommended is
the use of external energy source. (Power Adaptor Art.-No.:
FC3016) – This mode will come with next update.
Photo
Single shot
1 Sec
5 Sec
10 Sec
30 Sec
60 Sec
Activate the serial photo function in the photo mode – select a
picture every second up to every 60 seconds. Confirm the
selected interval with the "Start" button or leave the menu
pressing the left button.
The motion detector (Art.-No.: FCHD07) or the CarCamOne-cable (Art.-No.: CCHD02) is
supported in the external mode. Other sensors to start the camera will be launched in the
future.
SETUP
Press the „M“-button for 3 seconds to enter the setup.
SETUP V 1.0 Quick Guide
Language Select the language English, German, French or Spanish
Date Set date
Time Set time
Timestamp Activate the timestamp
Video Size Select the recording format 720p, 480p
FPS Select the frames per second
White Balance Select light temperature and environment
ISO Change ISO setting 100,200,400,800
Exposure Brighter Picture to be adjusted here
Effects Choose off, art, sepia, negative, monochrome, vivid
Contrast Select soft, standard or hard contrast
Sharpness Select soft, standard or hard sharpness
Resolution Select high, medium or low resolution
Flip Picture Select 180° flip and mirror function here
Auto Power Off Select the auto off function
Auto Screen Off Battery saving to be selected here
Microphone On/Off
Light Frequency 50/60Hz
Formatting Formatting the card
Reset Return to default settings
Update Update the Firmware

8
Permanent recording inside a car
In case you want to use the FlycamOne HD as a CarCamOne HD please use the
CarCamOne cable (optional available, Art.: CCHD02) and the sucking pad (FCHD28)
Slide in a micro SD card with minimum 8GB of
space into the camera.
Fix the camera at the sucking pad and find a good
position at the windshield. Adjust the head into the
right direction. Plug the 12/24V adaptor into the
cigarette socket.
Make sure the wire never limits you action – also
in case of Danger!
Starting the engine will activate the adaptor to start
as well the camera. When stopping the engine, also
the camera will close the file and shut down.
The CarcamOne is recording 15 minutes videos. Once space at the card is needed, it will
automatically erase the oldest files. In between two files there will be a gap of 3 seconds –
equal to 0,3% of the whole recorded file.
The default setting of the CarCamOne-cable is to detect the turning of the
engine – if your car is fitted with an energy saving system that stops the
motor or generator, or if it is powered by en electric motor you need to
remove the red jumper inside the plug.
Play back at the computer
The videos can be displayed at the PC in an easy way.
We recommend using the VLC Player (freeware) www.vlc-player.org. The player contains
many possibilities to adjust the picture, including a 180° flip option as well as brightness
adjustment.
Connect the camera using the USB-cable to your PC. Select the appearing "MSC" Mass
storage to use the camera as a drive.
Press [START] with the left mouse button and select the “Explorer” to display all drives.
Select the exchangeable drive and
find the video data in the contained
folders.
V

9
Using the camera as a webcam
Install the webcam drivers from the homepage
(www.FlyCamOne.com) and connect the camera to your
computer. Select "WebCam" in the menu of the camera.
Now you can use the camera - note that you need a
microphone for audio transmission.
As an accessory, we offer the FlyCamOne HD Docking
Station (Art.-No.: FCHD13), which loads the camera and
transfers data to the computer. The docking station is
equipped with a 10pin port and a mini USB port.
For use with the optional infrared motion detector
(Art.-No.: FCHD07) the station is also well suited – just
plug the cam into the 10pin port on the station.
The camera starts recording as soon as people or
animals are moving in front of the lens (up to 8m).
Splash water protection for usa
g
e on motorbike
Protect your camera steadily from
rain and splash water with the
available DiveBox
(Art.-No: FCHD31).
The box uses the same fixture as
the cam and is made of high- quality
acryl. It´s possible to adjust the
cameras head before inserting. For
usage in combination with the
CarCamOne-cable the marked area
has to be reamed.
Attention: the box is not fully
waterproof then anymore!
Usage as a regular camera
General
Flip 180°
Changing the direction of the head
requires to flip the picture by 180°. Press
the "right" button for 3 seconds to adjust
the direction according to your
requirements. Can't be changed once the
recording has been started.
Full screen
The camera is not displaying the full frame
as recorded. This setting allows focusing
to the center.
To get the full screen press "left" for 3
seconds.

10
Video recording
Release
button
"START"
When switching on the camera you can start
recording immediately pressing the "Start"
button. To stop press the button again.
Never remove the SD card or battery when
the cam is recording or still saving -
displayed by a rotating circle!
Photo shooting
Use the cross pad to get to the photo mode. Press the release button once to make a single
shot. To activate the serial photo function, press "M" to select the sequence.
Confirm you selection by pressing the “Start” button again. With next press of “Start” the cam
starts the serial photo mode, taking photos for instance every 5 seconds.
Using the Zoom
Zoom in
Zoom out
You can use the digital zoom while
recording pressing the top buttons of
the panel.
The zoom is displayed in a bar in the screen.
Playback of Video and Photos
Move to "Play" mode to view the recorded data. Recommended is to use a TV or the optional
2, 5" Screen. (Art.-No: FCHD02)
Use the cross pad to move through the recorded files and start playing by pressing the
release button. Left and right increase or reduce the playback speed.
Playback at the TV
Connect the included RCA-cable to you TV and set it to "AV"
Connecting the optional screen
The optional 2, 5" screen will be plugged into the cam
directly. Different mounts allow fixing it individual. At
the wrist when the camera is mounted at the helmet,
inside the car, at the handle bar of a bike.
The Y-cable enables the simultaneous use of the
CarcamOne-cable and screen!

11
Different type of mount
The line-Up of the FlyCamOne contains different type of fixing systems
The tripod adaptor fixes the camera to every standard tripod.
(Art-No.: FCHD25)
The pendulum mount can be screwed or glued to a RC model
- it enables the pan movement by a servo. The pendulum
function can be locked - but is mandatory when fixed to a sport
kite (Kite Surfing). This time the mount is fixed by straps.
(Art-No.: FCHD26)
The mount for the handle bar of a bike fixes the camera within
seconds (Diameter 22-25mm). (Art.-No.: FCHD27)
The sucking pad for the windshield or any other smooth
surface. (Art.-No.: CCHD03)
Fix the camera to your belt or jacket using the belt clip
furthermore with some tape almost anywhere.
(Art.-No.: FCHD029)
The mount for the wrist is fixing the screen, but can be
adjusted to the cam as well to use it as a universal fixing, also
for a helmet. (Art.-Nr.: FCHD030)

12
Exchange the Lens
To exchange to another lens, turn the head to get access
to the 4 screws at the backside. Untighten the screws with
a suitable Phillips.
The can be replaced by the wide angle lens.
(170° Fisheye - Art.-No.: FCHD10)
Replace the lens by the new one and tighten the screws
carefully!
Please Note! The opened camera head and connectors
can be damaged easily. Handle the change carefully
and take your time!
Exchange the frame set
Individualizise your Cam! Different colors of frame sets will
make your FlyCamOne a unique camera. Loose the safty string
first. Then unscrew the bottom part’s four screws and remove
the bottom. At take off the side panels. Assamble the new
frame in reverse order, but bind the safty string at the left side
before fixing the left frame part.
Tighten / Untighten the Head
If the head moves too easy, or if is too fix, it can be
adjusted by a screw behind the left side frame that can be
removed as described above. Turn the screw with a Phillips
to left to unscrew, turn it to the right to tighten it. Take care -
do not over twist!
Update the camera
To offer a maximum of convenience we are continuously working on the cameras firmware to
enter new functions or to solve some bugs.
Visit our webpage www.FlyCamOne.com and download the latest firmware available.
You only need to save the firmware file to your micro SD card. Slide the card into the camera
and select “Update” inside the Setup, then “Start”.

13
Technical Data
Power 5V (USB / 10Pin Port)
3,7V (LiPo battery 600mAh)
Consumption 320mAh
Size 95 x 52 x 21mm
Weight 53g incl. Battery
Battery 3,7V 600mAh LiPo
Format MPeg4
Sensor 5MPix CMOS
Lens 55° exchangeable
Zoom 4times digital
Screen 1“/ 2,54mm OLED
Microphone yes
AV-Out yes
USB Hi-Speed USB (2.0)
Operation temperature -10°C to 50°C
Humidity 10% to 80% (non-condensing)
Videos
Micro SD/SDHC-Card <= 32GB – Class 4 or higher
Trouble Shooting
Error Cause Solution
Display does not show
anything, Green LED is
not blinking
No power at the socket. Replace car s fuse
Fuse in the Adaptor melted Replace adaptor s fuse
The Video jerks when
playing at the PC.
The card, the USB
connection or the PC is too
slow
Download the file to the PC
first.
Stop other applications.
The video is turned 180° Wrong Settings Read „ 180° turn“
Date and time will not be
displayed in a correct way
Wrong Settings Change Settings in the Setup
Display shows „Error“ The camera cannot get
space – too many small
files.
Download the file to the PC
first. Format the SD-Card.
Display shows „Memory“ No more free memory left. Download the file to the PC
first. Format the SD-Card.

14
FlyCamOne HD Accessories Catalog
Please note: The CarCamOne high definition shares accessories of
the FlyCamOne HD 720p marked with "720"
Items marked with “1080” only cannot be used with the FlyCamOne HD 720p!
Find more details at www.FlycamOne.com
FlyCamOne HD 5.8GHz Receiver
with 63,5mm/2,5 inch FlyCamOne HD Screen
Art‐No.:EANItem
Compatible
Camera
FCHD02 4260033049520FlyCamOneHDScreen2,5";150cmcable720&1080
FCHD03 4260033049537FlyCamOneHDTransmissionSet5.8GHz;Range300m720&1080
CCHD02 4260033049544FlyCamOneHDCCOCable;12‐24V720&1080
FCHD05 4260033049551FlyCamOneHDRXCable 1080
FCHD06 4260033049568FlyCamOneHDBattery;Li‐Ion900mAh 1080
FCHD07 4260033049575FlyCamOneHDPIRTubew.120cmcable 720&1080
FCHD08 4260033049582FlyCamOneHD V‐EyesSet;incl.internal2,4GHz 720&1080
FCHD09 4260033049599FlyCamOneHD1080pLens133° 1080
FCHD10 4260033049605FlyCamOneHD1080pLens170°720&1080
FCHD11 4260033049612FlyCamOneHD1080pmyopiaLensSet 720&1080
FCHD12 4260033049629FlyCamOneHDV‐EyesBase 720&1080
FCHD13 4260033049636FlyCamOneHDDockingStation720
FCHD14 4260033049643FlyCamOneHDRemote(spare) 1080
FCHD154260033049650FlyCamOneHDGPSModul
FCHD16 4260033049667FCHDRapidRush16GBMicroSD‐Card 720&1080
FCHD17 4260033049674FlyCamOneHDBattery;LiPo600mAh 720
FCHD20 4260033049704FlyCamOneHDHDMIcable 1080
FCHD21 4260033049711FlyCamOneHDAVcable 720&1080
FCHD22 4260033049728FlyCamOneHDScreencable(spare) 720&1080
FCHD23 4260033049735FlyCamOneHD5.8GHzAdaptorcable 720&1080
FCHD24 4260033049742FlyCamOneHDExtension200cm 720&1080
FCHD25 4260033049759FlyCamOneHDTripodMount 720&1080
FCHD26 4260033049766FlyCamOneHDPendulumMount(planesandkites)720&1080
FCHD27 4260033049773FlyCamOneHDHandleBarMount 720&1080
FCHD28 4260033049790FlyCamOneHDSuckingpad 720&1080
FCHD29 4260033049797FlyCamOneHDBeltclip 720&1080
FCHD30 4260033049803FlyCamOneHDWristMount(Screen)spare 720&1080
FCHD31 4260033049810FlyCamOneHDDiveBox (upto 20m depth) 720
FCHD32 4260033049827FCHDRapidRush32GBMicroSD‐Card 720&1080
FCHD384260033049889FlyCamOneFPVHeadwithtwoServos 720&1080
FC3104 42600330487215.8GHzShieldantenna+500m 720&1080
©copyright 2010 by ACME the game company GmbH, Germany
Other manuals for FlyCamOne
1
This manual suits for next models
1
Table of contents
Other ACME IP Camera manuals