ACU-RITE 02005TBDI User manual

Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Contact Customer Support at
[phone] or visit www.AcuRite.com.
Weather Station
model 02005TBDI
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor..... 2
Features & Benets: Display.... 3
Sensor Setup ......................... 5
Display Setup ........................ 6
Setup Preferences .................. 7
Intelli-Time® Clock................... 7
Set the Time, Date & Units ...... 7
Placement Guidelines ................ 8
Using the Weather Station......... 9
Troubleshooting ...................... 10
Care & Maintenance................11
Replace Intelli-Time® Battery .... 12
Calibration ............................. 12
Specications.......................... 13
FCC Information ..................... 13
Customer Support ................... 14
Warranty................................ 14

2
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display Unit
2. Outdoor Sensor
3. Instruction Manual
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
IMPORTANT PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
►
Register a Product
Features & Benets
4
3
2
1
5
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
2. Wireless Signal Indicator
Flashes when data is being
sent to the display unit.
3. Battery Compartment
4. A-B-C Switch
ID code that must match display’s
A-B-C switch to ensure units
synchronize.
5. Battery Compartment Cover

3
24
25
26
27
28
29 30 31 32 33
1
2
3
4
5
6
7
13
14
15
8
16
1718
Features & Benets
Display Unit Front
Display Unit Back
34
35
36
12
19202123
910 11 9
22

4
DISPLAY UNIT FRONT
1. Day of the Week
2. Current Outdoor Temperature
Arrow icon indicates the direction the
temperature is trending.
3. Outdoor Sensor Signal Strength
4. High/Low Outdoor Humidity
Records
Highest and lowest humidity records
based on record viewing mode (#9).
5. High/Low Outdoor Temperature
Records
Highest and lowest temperature
records based on record viewing
mode (#9).
6. Forecasted High Temperature
7. Forecasted Low Temperature
8. 4 Hour Weather Forecast
9. Record Viewing Mode
Indicates viewing records for today,
all-time or “ “ auto-mode.
10. Outdoor Sensor Low Battery
Indicator
11. 4 to 8 Hour Weather Forecast
12. 8 to 12 Hour Weather Forecast
13. High/Low Indoor Humidity
Records
Highest and lowest humidity records
based on record viewing mode (#9).
14. High/Low Indoor Temperature
Records
Highest and lowest temperature
records based on record viewing
mode (#9).
15. Current Outdoor Humidity
Arrow icon indicates the direction the
humidity is trending.
16. Date
17. Geographic Region Selection
For setup preferences.
18. Current Indoor Temperature
Arrow icon indicates the direction the
temperature is trending.
19. Intelli-Time Clock®
20. Display Low Battery Icon
21. “ “ Icon
Appears while in SET mode.
22. Current Outdoor Humidity
Arrow icon indicates the direction the
humidity is trending.
23. TIME ZONE & AUTO DST
DISPLAY UNIT BACK
24. ”p” Button
For setup preferences.
25. “SET” Button
For setup preferences.
26. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
27. ”q” Button
For setup preferences.
28. ”tt” Button
Press to select record viewing mode (#9).
29. “geo” Button
Set geographical region preferences.
30. “RESET” Button
Full reset to factory defaults.
31. “zone” Button
Set time zone preferences.
32. Battery Compartment
33. Battery Compartment Cover
34. Display Kickstand
For tabletop placement.
35. Intelli-Time® Battery Compartment
36. Integrated Hang Hole
For easy wall mounting.

5
SETUP
Set the A-B-C Switch
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display unit in order for the
units to synchronize.
Install or Replace Batteries
AcuRite recommends high quality
alkaline or lithium batteries in
the outdoor sensor for the best
product performance. Heavy duty
or rechargeable batteries are not
recommended.
The sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.
1. Slide off the battery
compartment cover. Take note
of the A-B-C switch setting
inside the battery compartment
for display unit setup.
2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
Sensor Setup
2
1
1A-B-C Switch
set to match
display unit
2Install Batteries
2 AA batteries
A B C

6
Display Unit Setup
Set the A-B-C Switch
Locate the A-B-C switch inside
the battery compartment. Set
the A-B-C switch to A, B or C.
You must select the same letter
choices for both the display unit
and the sensor in order for the
units to synchronize.
Install or Replace Batteries
1. Remove the battery
compartment cover.
2. Insert 3 x AA alkaline
batteries into the battery
compartment, as shown.
Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
2
1
1A-B-C Switch
set to match
sensor
2Install Batteries
3 AA alkaline
batteries
A B C
SETUP
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.

7
ABCD
EFG
Setup: Geographic Region
Select your geographic region according to
the map (pictured right) by pressing the
“geo” button, located on the back of the unit in
the battery compartment. The letters for each
corresponding GEO region are shown on the
display screen. Geographic region must be set
in order for Precision Forecasting to function
properly. *The “ ” icon and geographic
region letter are only visible in GEO set mode.
You will automatically exit GEO set mode if no
buttons are pressed for 10 seconds. Enter GEO set
mode at any time by pressing the “geo” button
located inside the battery compartment.
Intelli-Time®Clock
Intelli-Time clock and calendar are pre-programmed
to the correct time and date, and update automatically for Daylight Saving
Time. All you need to do is select your time zone using the “zone” button
located inside the battery compartment.
Set the Time, Date & Units
Press the “SET” button, located on the back of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (ashing) item, press and release the “p” or
“q“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
TIME ZONE ( PST MST CST EST AST HAST AKST)
AUTO DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
UNITS: TEMPERATURE (ºF or ºC)
*If you live in an area that observes DST, DST should be set to ON even if it is
not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter SET MODE at any time by pressing the “SET” button.

8
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display unit and outdoor sensor are critical to the
accuracy and performance of this product.
Display Unit Placement
Place display unit in a dry area free of dirt and dust. Display stands
upright for tabletop use or is wall-mountable. For wall mounting,
hang using the keyhole located on back of the unit.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions. Sensor
is water resistant and is designed for general outdoor use, however,
to extend its life place the sensor in an area protected from direct
weather elements.
Hang the sensor using the integrated hang holes or hanger, or by
using string (not included) to hang it from a suitable location, like a
well covered tree branch. The best location is 4 to 8 feet above the
ground with permanent shade and plenty of fresh air to circulate
around the sensor.
Important Placement Guidelines
• To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.
• Display unit and outdoor sensor must be within 330 ft (100 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.).
TV 3
(100 meters)
(330 feet maximum)
(.91 m)
AT
LEAST
APART
Setup is Complete
The sensor will now synchronize with the display unit. It may take a few
minutes for synchronization to complete. NOTE: It will take up to 4 hours to
generate a weather forecast after initial setup.

9
Using the Weather Station
Precision Weather Forecasting
AcuRite’s Precision Forecasting provides your personal forecast of morning,
noon & night (4 hour, 4 to 8 hour and 8 to 12 hour) weather conditions. The
patent-pending technology combines regional weather patterns with data
measured by a sensor in your yard. It generates a forecast with pinpoint
accuracy - personalized for your exact location.
OPERATION
SNOW / RAIN
MIX LIKELY
RAIN
LIKELY
SNOW
LIKELY
STORMY
& WINDY
MOSTLY
CLOUDY
(flashing=stormy)
View the complete list of icons at www.AcuRite.com/acurite-icons
High & Low Records
Today’s high and low records are displayed for indoor and outdoor
temperature and humidity. Today’s records automatically clear at 12:00am
midnight every day. All-time high and low records are the maximum and
minimum readings recorded since batteries were installed.
Press the “tt” button to cycle through records for “today”, “all-time”, or
“ ” auto-mode. High & low records will automatically cycle through “today”
and “all-time” when “ ” auto-mode is selected.
To manually reset the high/low records currently being viewed, press and hold
the “p” on the back of the display to clear high records or press and hold
“q” on the back of the display to clear low records. Dashes display to conrm
you have cleared the records.

10
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 330 ft (100 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m)
away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
• Reset display by pressing the RESET button, located in
the battery compartment on the display unit. Time and
date will need to be entered after a reset.
• Forecast will be blank for rst 4 hours after battery
installation.
Outdoor
temperature
is ashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display unit indoors and
remove batteries/power adapter from both.
2. Make sure the A-B-C switch on both units match.
3. Reinstall batteries in the outdoor sensor.
4. Reinstall batteries in the display unit.
5. Let the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
Inaccurate
temperature
or humidity
• Make sure both the display unit and sensor are
placed out of direct sunlight and away from any heat
sources or vents (see page 8).
• Make sure both units are positioned away from any
sources of moisture.