AcueLighting Magic PAR 21 RGBW User manual

!
!
!
!
!
User Manual
!
Table of Contents
1 Introduction ...................................................................... 2
2 Safety information............................................................ 2
2.1 Specification ................................................................. 2
3 Installation ........................................................................ 4
4 Connections ..................................................................... 4
4.1 Connecting DMX signal................................................ 4
4.2 Voltage specification ................................................... 4
4.3 Connecting power supply ........................................... 5
5 Manual Operation ........................................................... 5
5.1 Control panel ................................................................ 5
5.2 Menu .............................................................................. 6
5.3 DMX channel list ............................................................ 7
!
!
!
!
!
!
!
!
!
!
!
!

!
1: INTRODUCTION
Thank you for purchasing the Acue Lighting Magic 18
RGBWW 4in1 LED par light. Please read this manual
carefully for safety reasons and to ensure trouble-free
operation.
2: SAFETY INFORMATION
1. Installation should be done by qualified personnel in
order to minimize the risk of accidental electric shock.
2. Disconnect the power cable before installation.
3. Before connecting the unit to the main power source,
make sure it is not damaged. If you notice any signs of
damage you immediately replace the power cord. Do
not connect the device to the main power source using
a damaged cable.
4. Do not use the device in high humidity conditions and
at temperatures above 40° C
5. The device must be installed on stable structures using
proper clamps or brackets.
2
2.1 Specifications
•Power consumption: 270W
•Power supply voltage: 95 - 240V
•Voltage frequency: 50/60Hz
•Diode type: 4in1 RGBW
•Number of diodes: 21
•Diode power: 10W
•Display: LED - 4 character display
•Color: RGBW
•Dimming: Linear: 0 - 100%
•Number of DMX channels: 4/8
•DMX standard: DMX 512
•Control interface: 4 buttons
•Operating modes: DMX, Master/Slave, Sound control, Auto mode
•AC IN: Dedicated powercon input connector
•AC OUT: Dedicated powercon output connector
•DMX IN: XLR - dedicated DMX input plug 3-pin XLR
•DMX OUT: dedicated DMX plug output 3-pin XLR
•IP Rating: IP19 (suitable for indoor use only)
•Housing material: Aluminum
•Cooling: Forced air fan cooling
•Height [in]: 10
•Width [in]: 11
•Depth [in]: 3
•Weight [lb]: 5
•Weight with packaging [lb]: 5.5
•Packaging includes: Fixture & dedicated powercon power cable
3

3: INSTALLATION
After removing the fixture from the packaging, check
if the fixture was not damaged during transport. Before
connecting to the mains, make sure that the device is
securely mounted. The manufacturer is not responsible
for damage caused by unstable mounting.
Ensure proper connection to the mains and proper
grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities,
including connecting the device to the mains must be
performed by qualified personnel.
4: CONNECTIONS
The device is equipped with the following interfaces:
1. DMX (in/out): XLR 3-pin
2. Power (in/out): integrated power cord/dedicated
IP65 plug
4.1 Connecting DMX signal
The connection is performed using cable with
XLR-female -> XLR-Male plugs.
4.2 Voltage specification
Input Voltage: 95~240V
Max Power Draw: 270w
4
4.3 Connecting power supply
The connection is performed using Powercon power
cable (included). The device must be operated by
qualified personnel. Make sure that the power grid
supply parameters are consistent with device
parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair.
Replacement or repair can be made only
by the manufacturer or by a person with appropriate
permissions.
5: Manual Operation
5.1 Control panel
The control panel is equipped with LED - 4 characters
display and 4 control buttons with the following
functions:
1. MENU – enter to main menu, go back from the
selected options, cancel changes
2. DOWN – choose option, edit parameter
3. UP – choose option, edit parameter
4. ENTER edit selected option, confirm changes
!
!
5

!
!
!
!
!
!
!
6
!
!
!
DMX512Control：!8!Channel!Model(A001)!
CH!
Display!
Function!
CH1$
Dimmer$
R、G、B、W$dimmer$:$from$dark$to$bright$
CH2$
R$dimmer$
R$dimmer$:$from$dark$to$bright$
CH3$
G$dimmer$
G$dimmer$:$from$dark$to$bright$
CH4$
B$dimmer$
B$dimmer$:$from$dark$to$bright$
CH5$
W$dimmer$
W$dimmer:$from$dark$to$bright$
CH6$
Strobe$
R、G、B、W$strobe:$from$slow$to$fast$
CH7$
Function$choice$
0~50:$DMX$8CH$Control.$ $
51~100:$Different$Colors$Output$ $
101~150:$Colors$Jump$Change.$ $
151~200:$Colors$Gradate.$ $
201~250:$Colors$Pulse$Change.$ $
251~255:$Sound-Active$ $
CH8$
Function$speed$
Speed$function,$from$slow$to$fast$
!
DMX512Control：! 4Channel!Model(D001)!
FUNCTION:!
!
!
For!more!information!please!visit!www.AcueLighting.com!
7
No!
Show$ !
Function!
Instruction!
1$
d001!
DMX$ $Address$
(001~512)$ $
DMX-512$address$set,$4$Channels$mode$ $
2$
A001!
DMX$ $Address$
(001~512)$ $
DMX-512$address$set,$8$Channels$mode$ $
3$
r255!
Red$ $
(000~255)$
UP、DOWN$Change$brightness$
4$
G255!
Green$
$(000~255)$
UP、DOWN$Change$brightness$ $
5$
b255!
Blue$
$(000~255)$
UP、DOWN$Change$brightness$ $
6$
u255!
white$
$(000~255)$
UP、DOWN$Change$brightness$ $
7$
FH99!
Strobe$flash$(01~99)$$
UP、DOWN$Change$the$speed$ $
8$
CL01!
Different$Colors$
Output$(01~08)$ $
UP、DOWN$Change$brightness$
9$
CC99!
Colors$Jump$Change$
(01~99)$
UP、DOWN$Change$the$speed$
10$
DE99!
Colors$Gradate$
$(01~99)$
UP、DOWN$Change$the$speed$
11$
CP99!
Colors$Pulse$Change$
(01~99)$ $
UP、DOWN$Change$the$speed$ $
12$
SU01!
Colors$sound-Active$
(01~09)$ $
UP、DOWN$Change$the$effects$
Channel$ !
Function$ !
Instruction$ !
CH1$
R$Dimmer$ $
Dimmer-$Dark$to$Bright$ $
CH2$
G$Dimmer$ $
Dimmer-$Dark$to$Bright$ $
CH3$
B$Dimmer$ $
Dimmer-$Dark$to$Bright$ $
CH4$
W$Dimmer$ $
Dimmer-$Dark$to$Bright$ $