Equinox Systems C-Shot User manual

Order code: EQLED405
C-Shot
Electric Confetti Launcher
User Manual

www.prolight.co.uk C-Shot User Manual 2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Before your initial start-up, please make sure that there is no damage caused during transportation.
• Should there be any damage, consult your dealer and do not use the equipment.
• To maintain the equipment in good working condition and to ensure safe operation, it is necessary
for the user to follow the safety instructions and warning notes written in this manual.
• Please note that damages caused by user modications to this equipment are not subject to warranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and
the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and/or property.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Never let the power cable come into contact with other
cables. Handle the power cable and all mains voltage
connections with particular caution!
• Never remove warning or informative labels from the unit.
• Do not open the equipment and do not modify the unit.
• Do not connect this equipment to a dimmer pack.
• Only use the equipment indoors.
• Do not expose to ammable sources, liquids or gases.
• Always disconnect the power from the mains when
equipment is not in use or before cleaning! Only handle
the power-cable by the plug. Never pull out the plug by
pulling the power-cable.
• Make sure that the available mains supply voltage is
between 220~240V AC, 50/60Hz.
• Make sure that the power cable is never crimped or
damaged. Check the equipment and the power cable
periodically.
• If the equipment is dropped or damaged, disconnect the
mains power supply immediately and have a qualied
engineer inspect the equipment before operating again.
• If the equipment has been exposed to drastic
temperature uctuation (e.g. after transportation),
do not connect power or switch it on immediately.
The arising condensation might damage the equipment.
Leave the equipment switched off until it has reached
room temperature.
• If your product fails to function correctly, stop use
immediately. Pack the unit securely (preferably in the
original packing material), and return it to your Pro Light
dealer for service.
• Only use fuses of same type and rating.
• Repairs, servicing and power connection must only be
carried out by a qualied technician. THIS UNIT CONTAINS
NO USER SERVICEABLE PARTS.
• This xture is for professional use only - it is not designed
for or suitable for household use. The product must be
installed by a qualied technician in accordance with local
territory regulations. The safety of the installation is the
responsibility of the installer. The xture presents risks of
severe injury or death due to re hazards, electric shock
and falls.
• WARRANTY: One year from date of purchase.

www.prolight.co.uk C-Shot User Manual 3
Product overview & technical specications
The C-Shot is designed to re confetti or streamers from
pre-lled electric cannons. The unit can be activated via
220-240V switching or the Equinox Detonator control unit.
• For use with 50cm and
80cm electric cannons
• Adjustable ring angle
• Ideal for most electric confetti
and streamer cannons
• PowerCON input/output
C-Shot Electric Confetti Launcher
Specications
Power consumption 30W
Power supply 220-240V, 50/60Hz
Fuse F2A 250V
Dimensions 170 x 110 x 140mm
Weight 1.8kg
Order code EQLED405
01 - LED indicator
02 - PowerCON output
03 - PowerCON input
04 - Cartridge holder
05 - Cartridge inputs
06 - Cannon output
holder vertical
angle adjustment
In the box: 1 x xture
& 1 x power cable
02
01
03
05
04
06
140mm
170mm
110mm
POWER INPUT
POWER OUTPUT
12V
CANNON
FEED
POWER INPUT
POWER OUTPUT
12V
CANNON
FEED
POWER INPUT
POWER OUTPUT
12V
CANNON
FEED

www.prolight.co.uk C-Shot User Manual 4
Operating instructions / WEEE notice
Operation:
1. Place the confetti tube into the holder and tighten the confetti tube with the rotary knob.
2. Plug the connector from the confetti tube to the connector in the C-Shot.
3. Prior to connection, isolate the power cable from any mains supply voltage, as the unit is
designed to discharge immediately, when the input voltage is applied.
4. Apply power to the C-Shot to activate the release of the confetti or streamers from the tube.
The C-Shot can also be controlled with the Equinox Detonator control panel. When the C-Shot
is powered with 220-240V, the output connector will supply power to the confetti tube that
will re the confetti.
Dependant on the length of cannon to be used, an optional ground plate (Order code: CONF022)
may be required to stabilise the C-Shot.
Warning!
Prior to connection, isolate the power cable from any mains supply voltage,
as the unit is designed to discharge immediately, when the input voltage is applied.
Do not aim the confetti tubes in the C-Shot at people, animals or any xtures or ttings.
The unit must have sufcient space to discharge its load (cartridge dependant).
The distance between the crowd and the C-Shot should be at least 3 meters.
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed of
with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government ofce, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for disposal.