Acustica BIG ONE User manual

ACÚSTICA
MAN101_0
BIG ONE
2-WAY ACTIVE SYSTEM, 2200W
Manual de Instrucções
User Manual
www.acusticafes.com
MADE IN
EU
7
6. Esquema de Ligações / Connections:
6.3 - Configuração: 2 Graves/Bass + 4 Satélites:
6.4 - Configuração: 2 Graves/Bass + 8 Satélites:
Total pow er
BIG
Total pow er
BIG
Total pow er
BIG
Total pow er
BIG
CAUTION
RISK OF ELECTRIC SHOC K
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOC K
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOC K
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOC K
DO NOT OPEN
WARN I N G
WARN I N G
WARN I N G
WARN I N G
CAUT I O N
CAUT I O N
CAUT I O N
CAUT I O N
POWER ON
POWER ON
POWER ON
POWER ON
SIGNAL
GROUND
LIFT
SIGNAL
GROUND
LIFT
SIGNAL
GROUND
LIFT
SIGNAL
GROUND
LIFT
GROUND
GROUND
GROUND
GROUND
FUSE F 10A
FUSE F 10A
FUSE F 10A
FUSE F 10A
MAINS LINK
230V AC / 50Hz
MAINS LINK
230V AC / 50Hz
MAINS LINK
230V AC / 50Hz
MAINS LINK
230V AC / 50Hz
MAINS INPUT
230V AC / 50Hz
2400VA
MAINS INPUT
230V AC / 50Hz
2400VA
MAINS INPUT
230V AC / 50Hz
2400VA
MAINS INPUT
230V AC / 50Hz
2400VA
MADE IN UE
MADE IN UE
MADE IN UE
MADE IN UE
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
DSP
Limiter
Electronic Crossover
Electronic Protection s
DSP
Limiter
Electronic Crossover
Electronic Protection s
DSP
Limiter
Electronic Crossover
Electronic Protection s
DSP
Limiter
Electronic Crossover
Electronic Protection s
2x 600 Watt rms Mid / Hi
1000 Watt rms Low
2x 600 Watt rms Mid / Hi
1000 Watt rms Low
2x 600 Watt rms Mid / Hi
1000 Watt rms Low
2x 600 Watt rms Mid / Hi
1000 Watt rms Low
Watt Watt
Watt Watt
rms rms
rms rms
DO NOT COVER
DO NOT COVER
DO NOT COVER
DO NOT COVER
DO NOT COVER
DO NOT COVER
DO NOT COVER
DO NOT COVER
Mains
Mains
Mains
Mains
Speakers Out
Speakers Out
Speakers Out
Speakers Out
Satellite Left
Satellite Left
Satellite Left
Satellite Left
Satellite Right
Satellite Right
Satellite Right
Satellite Right
1
1
1
1
1
1
1
1
one
one
one
one
Low Level
Low Level
Low Level
Low Level
Master Level
Master Level
Master Level
Master Level
System Input
System Input
System Input
System Input
Input
Input
Input
Input
Left
Left
Left
Left
Right
Right
Right
Right
Link
Link
Link
Link
Link
Link
Link
Link
Input
Input
Input
Input
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
dB
dB
dB
dB
dB
dB
dB
dB
-
-
-
-
-
-
-
-
∞
∞
∞
∞
∞
∞
∞
∞
U
S
E
F
U
S
E
F
U
S
E
F
U
S
E
F
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
Entrada de Sinal
Signal Input
Entrada de Sinal
Signal Input

BIG ONE: 6. Esquema de Ligações / Connections:
6.1 - Configuração: 1 Grave/Bass + 2 Satélites:
6.2 - Configuração: 1 Grave/Bass + 4 Satélites:
PORTUGUÊS / ENGLISH PORTUGUÊS / ENGLISH
1 6
13
12
678910 11
To ta l po we r
BIG
CAU TIO N
RISK O F ELECTR IC SHO CK
DO NOT O PEN
W A R N I N G
C A U T I O N
POW ER ON
SIGNAL
GROUND
LIFT
GROUND
FUSE F 10A
MAINS LINK
230V AC / 50Hz
MAINS INPU T
230V AC / 50Hz
2400VA
MADE IN UE
600 Watt r ms
Load 4 Ohm m in.
600 Watt r ms
Load 4 Ohm m in.
DSP
Limite r
Electr onic Crosso ver
Electr onic Protec tions
2x 600 Wa tt rm s Mid / H i
1000 Wat t rms Low
Wa t t rms
DO NOT COVER
DO NOT COVER
Mains
Speakers Out
Satell ite Left Satell ite Right
1
1
one
Low Level Master Level
System Input
Input
Left Righ t
Link LinkInput
0dB 0d BdB dB
- -
∞ ∞
S
U
E
F
45
3
2
1
+1
-2
+2
-1
Esquema de ligações das fichas Speakon / Speakon connection:
Total pow er
BIG
Total pow er
BIG
CAUTION
RISK OF ELECTRIC SHOC K
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOC K
DO NOT OPEN
WARN I N G
WARN I N G
CAUT I O N
CAUT I O N
POWER ON
POWER ON
SIGNAL
GROUND
LIFT
SIGNAL
GROUND
LIFT
GROUND
GROUND
FUSE F 10A
FUSE F 10A
MAINS LINK
230V AC / 50Hz
MAINS LINK
230V AC / 50Hz
MAINS INPUT
230V AC / 50Hz
2400VA
MAINS INPUT
230V AC / 50Hz
2400VA
MADE IN UE
MADE IN UE
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
600 Watt rms
Load 4 Ohm min.
DSP
Limiter
Electronic Crossover
Electronic Protection s
DSP
Limiter
Electronic Crossover
Electronic Protection s
2x 600 Watt rms Mid / Hi
1000 Watt rms Low
2x 600 Watt rms Mid / Hi
1000 Watt rms Low
Watt
Watt
rms
rms
DO NOT COVER
DO NOT COVER
DO NOT COVER
DO NOT COVER
Mains
Mains
Speakers Out
Speakers Out
Satellite Left
Satellite Left
Satellite Right
Satellite Right
1
1
1
1
one
one
Low Level
Low Level
Master Level
Master Level
System Input
System Input
Input
Input
Left
Left
Right
Right
Link
Link
Link
Link
Input
Input
0dB
0dB
0dB
0dB
dB
dB
dB
dB
-
-
-
-
∞
∞
∞
∞
U
S
E
F
U
S
E
F
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
INPUT LINK
ACÚSTICA
Power:...........
Impedance:....
Freq. Resp.:...
Sensitivity:.....
400W rms
8 Ohm
90Hz -18kHz
100 dB
2 WAY ACTIVE SYSTEM
BIG
one
CONNECTIONS CONNECTIONS
1 1
1 1
PIN OUT PIN OUT
Entrada de Sinal
Signal Input
Entrada de Sinal
Signal Input

PORTUGUÊS
1. Introdução:
Estimado cliente,
Para facilitar a utilização correcta deste Siste-
ma activo criámos este Manual de Instrucções.
Por isso leia-o atentamente antes de iniciar a
utilização do equipamento.
Observe todos os dados técnicos.
Os nossos produtos foram submetidos a testes
duros e rigorosos assim como a controles de
segurança durante todo o processo de fabrico,
pelo que aconselhamos apenas a utilização de
peças originais de substituição. Ao utilizar ou-
tras peças que não as originais perderá todos
os direitos de Garantia, assim como se proce-
der a alguma alteração ao produto original.
3. Legenda do BIG ONE:
3.1 -
Interruptor para ligar e Desligar o terminal de
Terra do Amplificador;
3.3 - FUSE: Fusível de Rede 10A;
3.4 - ALIMENTAÇÃO: Ficha de alimentação
Speakon 230V ac / 50Hz / 2400VA -
3.5 - LINK ALIMENTAÇÃO: Ficha de alimen-
tação Speakon 230V ac / 50Hz / 2400VA -
Link - para alimentar
directamente outro grave Big one;
3.6 - LOW LEVEL: Potenciómetro de volume
para controlar o nível do Grave;
3.7 - MASTER LEVEL: Potenciómetro de
volume para controlar o nível geral do Sistema;
3.8 - LEFT INPUT: Entrada de sinal - canal
esquerdo;
3.9 - LEFT LINK: Link de sinal para ligar
outro sistema BIG ONE;
3.10 - RIGHT INPUT: Entrada de sinal - canal
direito;
3.11 - RIGHT LINK: Link de sinal para ligar
outro sistema BIG ONE;
3.12 - LEFT OUTPUT: Saída de Sinal para
ligar o satélite - canal esquerdo;
3.13 - RIGHT OUTPUT: Saída de Sinal para
ligar o satélite - canal direito;
POWER ON: Interruptor para ligar e
desligar o Amplificador;
3.2 - SIGNAL GROUND LIFT/GROUND:
Neutrik®
PowerCon®;
Neutrik® PowerCon®
2. Precauções Importantes:
2.1 - Ligue sempre o módulo Amplificado a u-
ma tomada 230V com Terra;
2.2 - Antes de ligar o Amplificador verifique
que os potenciómetros de Volume estão no
seu valor mínimo;
2.3 - No caso de fundir o fusível, substitua-
o sempre por um outro com as mesmas ca-
racterísticas;
2.4 - Evite colocar objectos que possam inter-
ferir com a normal ventilação do Amplificador;
2.5 - Em caso de curto-circuito acidental, este
sistema possui uma protecção interna que a-
ctuará desligando o amplificador. Neste caso,
deverá desligar o Amplificador e aguardar
aproximadamente 1 minuto. Volte a ligar.
2.6 - Não tente reparar este aparelho. Procure
sempre um técnico qualificado para o efeito,
preferencialmente um técnico da Acústica;
25
4. Procedures:
4.1 - Using the Speakon-Speakon cables sup-
plied, connect Bass speaker to the satellites
using Speakon outputs ( 12 / 13 ), just like the
picture on page 1;
4.2 - Connect the Signal font (mixer) to sys-
tem through the LEFT INPUT ( 8 ) and RIGHT
INPUT ( 10 ). If you want to connect another
bass then you can use the LEFT LINK ( 9 ) and
RIGHT LINK ( 11 ) to send signal;
4.3 - Connect the mains supply through Spea-
kon AC connection ( 4 ) using the supplied ca-
ble. If you want to connect another bass (ampli-
fier) then you can use the MAINS LINK ( 5 ) to
directly supply it;
4.4 - Turn on the the amplifier using On/Off
power switch ( 1 );
4.5 - System is ready to start working and you
can now adjust volume;
5. Technical Specifications:
5.1 - Satellite:
ENGLISH
5.2 - Bass:
5.3 - Amplifier module:
Power
Power
Subwoofer
Output power
Satellite
Output power
Freq. Resp.
Freq. Resp.
Sensitivity
Sensitivity
Protections
Sound pressure
Sound pressure
Loudspeaker
Loudspeaker
Inputs
Driver
Impedance
Impedance
Outputs
X-over Freq.
Directivity
Inputs
Protection
Rigging
Dimensions
Dimensions
Mains supply
Weight
Weight
400W rms
1000W rms
1000 Watt rms
2x 600 Watt rms
4Ohm
4Ohm
100Hz - 18KHz
38Hz - 125Hz
102dB, 1W@1m
101dB, 1W@1m
Short-circuit, DC, DSP
119dB @ 10% máx
132dB @ 10% máx
10” MF
18” MF
In/Link 2x XLR,
1” HF
8Ohm
8Ohm
Out 2x Speakon® NL4
2KHz @ 18dB/oct
90º / 15º
2x Speakon NL4
Thermal (PTC)
Quick release, fully integrated
Adjust. top hat 18º w/ 4 steps
495x315x350mm
800x610x820mm
In/Link Neutrik® PowerCon®
22Kg
44,5Kg

5. Especificações Técnicas:
5.1 - Satélite:
5.2 - Grave:
5.3 - Amplificador:
Potência
Potência
Potência saída
Subwoofer
Potência saída
Satélites
Resp. em Freq.
Resp. em Freq.
Sensibilidade
Sensibilidade
Protecção
Pressão sonora
Pressão sonora
Altifalante
Altifalante
Entradas
Motor
Impedância
Impedância
Saídas
Freq. X-over
Directividade
Entradas
Protecção
Suspensão
Dimensões
Dimensões
Alimentação
Peso
Peso
400W rms
1000W rms
1000 Watt rms
2x 600 Watt rms
4Ohm
4Ohm
100Hz - 18KHz
38Hz - 125Hz
102dB, 1W@1m
101dB, 1W@1m
Curto-Circuito, DC, DSP
119dB @ 10% máx
132dB @ 10% máx
10” MF
18” MF
In/Link 2x XLR,
1” HF
8Ohm
8Ohm
Out 2x Speakon® NL4
2KHz @ 18dB/oct
90º / 15º
2x Speakon NL4
Térmica (PTC)
“Rigging” completo e integrado
Copo ajust. 18º c/ 4º intervalo
495x315x350mm
800x610x820mm
In/Link Neutrik® PowerCon®
22Kg
44,5Kg
4. Procedimentos de Ligação:
4.1 - Utilizando os cabos Speakon-Speakon
fornecidos, ligue o Grave aos satélites através
das saídas Speakon ( 12 / 13 ), tal como no
esquema da página 6;
4.2 - Ligue a fonte de sinal (mesa de mistura)
ao Sistema através das entradas LEFT INPUT
( 8 ) e RIGHT INPUT ( 9 ). Caso pretenda ligar
outro grave, utilize as saídas LEFT LINK ( 9 ) e
RIGHT LINK ( 10 ) para “passar” o sinal;
4.3 - Ligue a alimentação do Sistema através
da entrada Speakon AC ( 4 ) utilizando o cabo
fornecido. Caso pretenda ligar outro grave
poderá utilizar a saída MAINS LINK ( 5 ) para
alimentar com 230V AC;
4.4 - Ligue o Amplificador carregando no
botão On/Off ( 1 );
4.5 - Controle os Volumes MASTER ( 7 ) e
BASS ( 8 ) a seu gosto;
PORTUGUÊS
1. Introduction.
Dear customer,
In order to operate this 2-way Active System in
a safe and reliable manner, follow the instruc-
tions in this booklet. Before operate the equip-
ment, read the instructions carefully.
Please note the technical information.
Our products undergo very rigorous testing
under strict conditions and they are monitored
continuosly during the manufacturing process.
In order to guarantee the product function and
safety, the original parts of the manufacturer's
design must be used. If any parts other than
those of the manufacturer are used, or the pro-
duct is modified in any way, the user forfeits all
warranty rights to claim.
3. BIG ONE Legend:
3.1 -
SIGNAL GROUND LIFT / GROUND:
Signal Ground Lift Barrier Strip;
3.3 - FUSE: Mains fuse 10A;
3.4 - ALIMENTAÇÃO: Mains supply Speakon
connector 230V ac / 50Hz / 2400VA -
;
3.5 - MAINS LINK: Mains supply Speakon
connector 230V ac / 50Hz / 2400VA -
Link - to supply another Big One
amplifier;
3.6 - LOW LEVEL: Level Pot to control
amplifier´s Bass Volume;
3.7 - MASTER LEVEL: Level Pot to control
amplifier´s Master volume;
3.8 - LEFT INPUT: Signal Input in 3-pin XLR -
left channel;
3.9 - LEFT LINK: Signal Link in 3-pin XLR to
connect another Big One system;
3.10 - RIGHT INPUT: Signal Input in 3-pin
XLR - right channel;
3.11 - RIGHT LINK: Signal Link in 3-pin XLR
to connect another Big One system;
3.12 - LEFT OUTPUT: Output signal to
connect the satellite - left channel;
3.13 - RIGHT OUTPUT: Output signal to
connect the satellite - right channel;
POWER ON: On/Off power switch to
connect and disconnect the amplifier;
3.2 -
Neutrik®
PowerCon®
Neutrik®
PowerCon®
2. Important Precautions:
2.1 - Always operate the unit with 230V ac
and connected to the system ground;
2.2 - Do not turn on the Amplifier before
checking that all Speakers are correctly
connected;
2.3 - Do not turn on the Amplifier before
checking that all Volume control Pots are in
their minimum value;
2.4 - If fuse blows, change it by another
with exactly the same specifications;
2.5 - Do not cover cooler´s output;
2.6 - This system has an internal protection
that will act by turning off the ampplifier if an
accidental short-circuit occurs. In this situation
you must wait 1 minute or so before connecting
your amplifier again.
43
ENGLISH