Gallo Acoustics DROPLET User manual

DROPLET
INSTALLATION GUIDE

DROPLET INSTALLATION STEPS
Carefully unpack and check the components.
Select a suitable location for installation
of the Gallo DROPLET loudspeaker, taking
time to consider access for cable installation
within the ceiling cavity and applicable
building regulations. You should also be sure
that the ceiling can support the weight of
the DROPLET loudspeaker.
The DROPLET loudspeaker is designed to
connect to speaker cable that has been
installed within the ceiling cavity. The
speaker cable should be lead to your
selected location, exiting the ceiling via a
small hole.
Affix the ceiling plate to the ceiling, leading
the speaker cable from the cavity through
the large cable hole on the ceiling plate.
Be sure to use fixings appropriate to the
ceiling type, taking into consideration the
weight if the DROPLET speakers.
Slide the ceiling rose and cable grip onto the
DROPLET cable
Wrap the DROPLET cable around the cable
grip tabs on the ceiling plate, routing
towards the tension clamp. Before securing
the tension clamp in place, check that the
DROPLET speaker is at the desired height.
Trim any excess DROPLET speaker cable,
then connect to one side of the supplied ter-
minal block, before connecting the speaker
cable from the cavity to the other side.
Slide the ceiling rose up into position and
secure with the two small screws supplied,
before screwing the external cable cable
grip in place.
2

3
SAFETY
The manufacturer, distributor or their
agents cannot be held responsible for
any injury as a result of improper use or
installation of this product.
DROPLET WEIGHTS
Micro 1175g
Micro SE 1155g
A’Diva 1795g
A’Diva SE 1485g

BACKCOVER
ANTHONY GALLO ACOUSTICS LTD
THE INOX BUILDING
CALDWELLSIDE
LANARK
SCOTLAND
UNITED KINGDOM
ML11 7SR WWW.GALLOACOUSTICS.COM