Keysheen Industry XPS001W1 User manual
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
XPS001W
PARTS LIST
PART
NO.
11 12
MATERIAL CODE
18160401003
Music Speaker Battery Device
18160105002
PART Q’TY PART
NO. MATERIAL CODE PART Q’TY
PAGE 1 OF 3
"
"
"
"
FIGURE 1
Step 1:
Pull out the battery device (#2) and then install 3 AAA
batteries.
Do not discard of any of the packaging until you have checked that you have all of the
parts and fittings required.
Keep children away during assembly. This item contains small parts that can be
swallowed by children. Children should always be under direct adult supervision while
using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
vice
2
2
1
2
Press
Back Side
PAGE 2 OF 3
FIGURE 2
FIGURE 3
Step 2:
Slide the music speaker (#1) onto the umbrella pole and then insert the battery device (#2).
Cleaning and Maintenance
To prolong the life and beauty of your music speaker,
remove the batteries and store it indoors during long
periods of non-usage or in any inclement weather.
1
2
push
Release
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
Warranty
This product is covered by Courtyard Creations Inc. one–year limited warranty.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer’s responsibility for freight and packing charges to and from the service center.
ENJOY!
QUICK SET UP GUIDEUmbrella Bluetooth Speaker
with LED Lights
STEREO SOUND
1 Turn on unit by pushing the On / Off button.
LED Button On / Off Button
RECHARGABLE BATTERIES
WATER
RESISTANT
NO TOOLS REQUIRED STEREO SOUND
atteries so separately
Solutions to Common Speaker
Phenomenon
Problems Solutions
Several
unsuccessful
connection
attempts
Volume too
low or sound
distorted.
Discontinuous
sound when
music playing
Indicator will
not turn on
Ensure the speaker is in standby mode and turn
off connections with other Bluetooth devices.
Check the volume setting and adjust the
volume appropriately.
Move the speaker closer or remove obstacles
between the speaker and your music playing
device.
Check batteries.
!"$%!&'
32ft (the transmission distance varies due to different environments and
Bluetooth equipment of cell phones)
*+/;
*+<"<=<>>>?
Important Notes
J"!!<
<+!
"!+"<!
%!"!"Z
%!"!<["
%"!!\!"\\
furnace, or other heating equipment.
JZ=+]"""
%"<"!<+<
%]""+=^
%]\""_!=`!x\!z=
(ni-cad, ni-mh, etc.).
Umbrella Bluetooth Speaker with LED Lights
1
4
PAGE 3 OF 3
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital, pursuant to Part 15 or the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not in stalled and used in
accordance with the instructions, may casue harmful interference
to radio communications, However, there is no guarantee
that interference will not occur in a particular installation. If
the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for
help.
Industry Canada Notice
This device complies with Industry Canada licence-exempt RSS
standard(s).
1. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interferencethat may cause undesired operation of the device."
2.Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Avis d'Industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas produire
de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement. Cet appareil numérique ne dé
passe pas les Rèlements sur l'interférence radio par un appareil num
érique de classe B stipulées dans les Règlement sur l'interférence
redio d'industrie Canada.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
or an uncontrolled environment. In order to avoid the possibility of exceeding
the FCC radio frequency exposure limits, Human proximity to the antenna shall
not be less than 20cm (8 inches) during normal operation
Table of contents
Other Keysheen Industry Speakers manuals
