ADC TrueNet Termination Block User manual

www.adc.com • [phone] • 1-800-366-3891
Spec Sheet
TrueNet®
CopperTen®Termination Block
The 20-pair TrueNet®CopperTen®termination block is designed to suit five incoming and
five outgoing four-pair Category 6a cables. Each IDC slot is color-coded to allow for accurate
termination of each of the four pairs. The CopperTen termination block utilizes a disconnect
feature making it ideal for Patch-by-Exception installations and can also be patched as a traditional
cross-connect. The cable manager at the rear of the module ensures that cables are held in place
securely without the need for Velcro ties.
Features:
Transmission performance to TIA-568.B.2-10 component compliance as well as 10 Gigabit•
ISO/IEC 11801 ed.2.1 extrapolated component•
Color-coded for ease of termination•
Each module will accommodate five four-pair UTP CopperTen cables•
45-degree silver-plated IDCs provide secure, reliable gas-tight connections•
Blocks can be terminated with standard termination tool or with a 110 tool•
Four-pair to four-pair patch cords are available for Patch-by-Exception installations•
Four-pair to RJ45 cords are available to interface with network and other equipment•

9/08•102097AE TrueNet®CopperTen®Termination Block
TrueNet®
CopperTen®Termination Block
2
www.adc.com • [phone] • 1-800-366-3891
Specifications
MECHANICAL
Wire range for solid and stranded copper conductors: 0.4 mm to 0.65 mm (26 to 22 AWG)*
Wire insulation diameter range (PE, PVC): 0.7mmto1.4mm
Number of wire terminations: > 100
Wire insertion force (0.5 mm conductor diameter): 6 N
Wire pull out force, radial (0.5 mm conductor diameter): 5 N
Wire pull out force, axial (0.5 mm conductor diameter): 35 N
Number of patching cycles: Modules:upto750
Patch Plugs: up to 200
ELECTRICAL
Transmission, performance and reliability: TIA-568.B.2-10 standards
Voltage/current rating at 25 ºC (77 ºF) ambient: 150 VAC at 2.5A max
Insulation resistance: > 50,000 M at 500 VDC
ENVIRONMENTAL AND SAFETY
Safety compliance: UL 1863
Flammability rating of plastic housing: UL 94-VO
Environment for use: Indoors or in dry enclosure
*Should there be a requirement to terminate cables other than 10 Gigabit cable, a maximum of 2 equal diameter
solid conductors only, of up to 0.5 mm conductor diameter can be terminated per slot. Only 1 conductor of
stranded wires per slot can be terminated. If any conductors >0.5 mm diameter have been terminated, reversal
to smaller conductors is no longer possible.

9/08•102097AE TrueNet®CopperTen®Termination Block
TrueNet®
CopperTen®Termination Block
3
www.adc.com • [phone] • 1-800-366-3891
Ordering Information
Description Catalog Number
Back mount frame 12 way kit
1 x Stainless steel 12 way mounting frame
12 x CopperTen blocks each capable of terminating 5 x CopperTen cables
12 x Rear cable managers: 1 for each CopperTen block
12 x Label holders
 64501107-00
Management kit
2 x Patch cord dual cable management rings
1 x Dual patch cord cover
6450 1 103-00
Patch cord Size Color Catalog Number
4-pair to 4-pair 1.2 m (4 ft) Blue 6451 2 401-10
4-pair to 4-pair 2.1m(7ft) Blue 6451 2 401-20
4-pair to 4-pair 3.0 m (10 ft) Blue 6451 2 401-30
4-pair to 4-pair 4.5 m (15 ft) Blue 6451 2 401-40
4-pair to RJ45 1.2 m (4 ft) Blue 6451 2 400-10
4-pair to RJ45 2.1m(7ft) Blue 6451 2 400-20
4-pair to RJ45 3.0 m (10 ft) Blue 6451 2 400-30
4-pair to RJ45 4.5 m (15 ft) Blue 6451 2 400-40

Spec Sheet
Website: www.adc.com
FromNorthAmerica,CallTollFree:1-800-366-3891•OutsideofNorthAmerica:[phone]
Fax:[phone]•ForalistingofADC’sglobalsalesofficelocations,pleaserefertoourwebsite.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
102097AE 9/08 Revision © 2008, 2006 ADC Telecommunications, Inc. All Rights Reserved