Addonics Technologies ADU3ESA User manual

Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/
v3.1.11
T E C H N O L O G I E S
www.addonics.com
User Guide
USB 3.0 to eSATAp Adapter
(ADU3ESA)

Type of USB Port:
USB 3.0 - Green Power LED
USB 2.0 - Orange Power LED
Drive Activity LED:
Blinking red color if there is drive activity on the eSATA storage device connected to
the USB3.0 to eSATAp adapter.
Note: The USB3.0 to eSATAp adapter is compatible to hardware port multipliers
where the hard drives are configured as a single raid volume. The current firmware of
the USB3.0 to eSATAp adapter also supports individual hard drive mode when
connected to a JMicron JMB393 port multiplier.
In this mode, the system sees a single USB device with multiple drive letters.
Removing any of the storage units (or drive letters) associated with the single USB
device forces the USB to detach and reenumerate with the reduced number of drives.
If you remove or disconnect one of the drives connected on the JMicron JMB393 port
multiplier, this will stop activity on all the drives which would mean if you are in the
process of transferring data on any drive, it will stop.
www.addonics.com
Phone: [phone]
Fax: [phone]
Email: http://www.addonics.com/sales/query/
CONTACT US
Drive Activity LED
Power LED
eSATAp (Hybrid eSATA) port for
connecting eSATA or eSATAp
storage device
To any USB3.0
or 2.0 port
To Computer/System
USB
Extension
Cable