Adesso ELIZA 2143-01/22 User manual

IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
BULB TYPE: (1) 100W
ASSEMBLY INSTRUCTIONS FOR
ELIZA FLOOR LAMP
Model # 2143-01/22
1.02143-01/22
21 Penn Plaza Suite 909 New York, NY 10001
Tel: [phone] Fax: [phone]
www.adessohome.com
Assembly Instructions (English)
Glass shade
Socket ring
Bulb
Socket
Bent pole
Middle pole
Bottom pole
Base
Lamp cup
Socket ring
1. Screw middle pole onto bent pole and tighten.
2. Screw bottom pole onto middle pole and tighten.
3. Screw bottom pole onto base to tighten.
4. In order to adjust the direction of the arc lamp
so that the arm is facing forward, please loosen the
washer on the bottom of the base using the wrench.
Once the lamp is facing the right direction, tighten
the washer back in place to secure the base
connection. Be sure the glass shade is hanging over
the base as shown in this picture.
5. Socket ring comes pre-assembled to the socket.
Before assembling the glass shade, please unscrew
this socket ring. Set glass shade onto socket and
tighten clockwise with socket ring to secure shade.
6. Install the bulb by screwing it into the socket.

IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless plug can be
fully inserted. DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
BULB TYPE: (1) 1 x 100 vatios
INSTRUCCIONES DE ENSAMBLAJE PARA
ELIZA LAMPARA DE PISO ARQUEADA
Modelo # 2143-01/22
1.02143-01/22
21 Penn Plaza Suite 909 New York, NY 10001
Tel: [phone] Fax: [phone]
www.adessohome.com
Boquilla
Anillo de la boquilla
Bombilla
Pantalla de Vidrio
Poste Doblado
Poste Medio
Poste Inferior
Base
Copa de la lámpara
1. Enrosque el poste medio en el poste dobladoy
apriételo.
2. Enrosque el poste inferior en el poste medio y
apriételo.
3. Enrosque el poste inferior en labasey apriételo.
4. Para ajustar la dirección de la lámpara de arco y
que el brazo quede hacia adelante, afloje la arandela
en la parte inferior de la base usando la llave. Una
vez que la lámpara esté en la dirección correcta,
apriete de nuevo la arandela para asegurar la
conexión de la base. Asegúrese de que la pantalla
de vidrio cuelgue sobre la base como se muestra en
la imagen.
5. El anillo de la boquilla viene premontado en la
boquilla. Antes de colocar la pantalla de vidrio,
desenrosque el anillo. Luego coloque la pantalla de
vidrio en la boquilla después enrosque hacia la
derecha el anillo en la boquilla para asegurar la
pantalla.
6. Coloque la bombilla enroscándola en la boquilla.