ADLINK Technology EOS-JNX-I User manual

EOS-JNX-I / EOS-JNX-G
Edge AI Vision Inference System
User’s Manual
Manual Rev.: 1.1
Revision Date: February 17, 2022
Part No: 50M-00054-1010

ii Revision History
Revision History
Revision Release Date Description of Change(s)
1.0 2021-12-08 Initial Release
1.1 2022-02-17 Correct Front and Rear Panel I/O
descriptions; add safety warning

Preface iii
EOS-JNX Series
Preface
Copyright © 2022 ADLINK Technology, Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global
environmental preservation through compliance with the Euro-
pean Union's Restriction of Hazardous Substances (RoHS) direc-
tive and Waste Electrical and Electronic Equipment (WEEE)
directive. Environmental protection is a top priority for ADLINK.
We have enforced measures to ensure that our products, manu-
facturing processes, components, and raw materials have as little
impact on the environment as possible. When products are at their
end of life, our customers are encouraged to dispose of them in
accordance with the product disposal and/or recovery programs
prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.

iv Preface
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
Informations destinées à prévenir les blessures corporelles
mineures, les dommages aux composants, la perte de don-
nées et/ou la corruption de programme lors de l'exécution
d'une tâche.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
Informations destinées à prévenir les blessures corporelles
graves, les dommages aux composants, la perte de données
et/ou la corruption de programme lors de l'exécution d'une
tâche spécifique.

v
EOS-JNX Series
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Tables......................................................................... vii
List of Figures........................................................................ ix
1 Introduction ........................................................................ 1
1.1 Features............................................................................... 1
1.2 Specifications....................................................................... 2
1.3 Mechanical Dimensions....................................................... 4
1.4 External Layout.................................................................... 6
1.5 Pin Definitions...................................................................... 9
1.5.1 RJ45 LAN/PoE Connectors ........................................ 9
1.5.2 PoE LED................................................................... 12
1.5.3 USB Connectors....................................................... 12
1.5.4 D-sub 15-pin DI/O Connector (Female).................... 14
1.5.5 HDMI Connector....................................................... 15
1.5.6 DC Power Connector................................................ 16
1.5.7 D-sub 9-pin RS-232/485 Connector (Male) .............. 17
1.5.8 Front Panel System Status LED............................... 17
1.6 Wafer Connector (2.0mm Pin Pitch) .................................. 18
1.7 USB Micro-A Connector .................................................... 19
2 Getting Started ................................................................. 21
2.1 Unpacking Checklist .......................................................... 21
2.2 Cooling Considerations...................................................... 21
2.3 Internal Storage Installation (Optional) .............................. 22
2.3.1 Removing the Chassis Cover ................................... 22
2.3.2 Installing an M.2 SSD Module/USB Dongle ............. 25

vi
2.3.3 Installing an M.2 2230 Module (Optional) ................. 27
2.3.4 Installing an Internal USB Device (Optional) ............ 29
2.4 Front Panel I/O Connection ............................................... 30
2.4.1 Connecting General Input/Output Ports.................... 30
2.4.2 Connecting PoE Camera .......................................... 31
2.4.3 Digital I/O Connection............................................... 32
2.4.4 Connecting DC Power .............................................. 33
2.4.5 COM Port (RS-232/485) Connection ........................ 33
2.5 Wall Mount (Optional) ........................................................ 34
2.6 DIN Rail Mount................................................................... 35
3 Using the System.............................................................. 37
3.1 Software Configuration ...................................................... 37
3.2 System Reset..................................................................... 37
3.3 System Recovery............................................................... 38
Important Safety Instructions............................................... 39
Getting Service...................................................................... 43

List of Tables vii
EOS-JNX Series
List of Tables
Table 1-1: Specifications ............................................................. 2
Table 1-2: Front Panel I/O Connectors & Controls ...................... 6
Table 1-3: Rear Panel I/O Connectors ........................................ 8
Table 1-4: RJ45 LAN/PoE Connector Pin Definition.................... 9
Table 1-5: PoE LAN/Uplink Port Connector Definition............... 10
Table 1-6: PoE/Uplink LAN LED Connection Status ................. 10
Table 1-7: GigE LAN LED Connection Status ........................... 11
Table 1-8: EOS-JNX-G PoE LAN Port Connector Definition ..... 11
Table 1-9: PoE LAN LED Connection Status ............................ 11
Table 1-10: GigE LAN LED Connection Status ........................... 12
Table 1-11: PoE LED Status........................................................ 12
Table 1-12: USB 2.0 Type-A Connector Pin Definition................ 12
Table 1-13: USB 3.0 Type-A Connector Pin Definition................ 13
Table 1-14: D-sub 15-pin DI/O Connector Pin Definition............. 14
Table 1-15: HDMI Connector Pin Definition................................. 15
Table 1-16: DC Power Connector Pin Definition ......................... 16
Table 1-17: D-sub 9-pin RS-232/485 Connector Pin Definition ... 17
Table 1-18: Front Panel System Status LED............................... 17
Table 1-19: Wafer Connector Pin Definition ................................ 18
Table 1-20: USB Micro-A Connector Pin Definition ..................... 19

viii List of Tables
This page intentionally left blank.

List of Figures ix
EOS-JNX Series
List of Figures
Figure 1-1: EOS-JNX-I Front View................................................ 4
Figure 1-2: EOS-JNX-I Side View................................................. 4
Figure 1-3: EOS-JNX-G Front View.............................................. 5
Figure 1-4: EOS-JNX-G Side View ............................................... 5
Figure 1-5: Front Panel I/O Connectors........................................ 6
Figure 1-6: Rear Panel I/O Connectors ........................................ 8
Figure 2-1: Installing an M.2 SSD Module/USB dongle .............. 25
Figure 2-2: Installing M.2 2230 Module Cable Clips ................... 27
Figure 2-3: M.2 2230 Module Cable Routing .............................. 28
Figure 2-4: Installing Internal USB Device (Optional) ................. 29
Figure 2-5: USB Device Sponges (Optional) .............................. 29
Figure 2-6: Digital Input Schematic Diagram .............................. 32
Figure 2-7: Digital Output Schematic Diagram ........................... 32
Figure 2-8: Wall Mounting........................................................... 34
Figure 2-9: DIN Rail Mount ......................................................... 35

xListofFigures
This page intentionally left blank.