Adstec Opd9000 series User manual

Last changed: 2021-07-13

Instruction manual

Industrial monitors

OPD9000 series

Translation of the original instruction manual

OPD9000 series −Instruction manual v1.0 2

Read these instructions carefully before using and store for future reference. These instructions

contain important information about the product, in particular about its intended use, safety,

installation, utilisation, maintenance and disposal.

Hand over the instructions to the user following installation of the product, and pass the manual

on to the new user if the product is resold.

These instructions can be downloaded from: www.ads-tec.de in the download area.

Publisher

ads-tec Industrial IT GmbH

Heinrich-Hertz-Straße 1

72622 Nürtingen

Phone: +49 7022 2522-0

Internet: www.ads-tec.de

E-mail: mailbox@ads-tec.de

OPD9000 series −Instruction manual v1.0 3

Contents

1General information about documentation...............................................................................5

1.1 General information 5

1.2 Explanation of safety instructions 5

1.2.1 Structure of safety instructions 5

1.2.2 Explanation of signal words 6

1.3 Relevant device documentation 7

1.4 Symbols 7

1.5 Data, figures and modifications 7

1.6 Trademarks 8

1.7 Copyright 8

2General device information ......................................................................................................9

2.1 Manufacturer and contact details 9

2.2 Intended use 9

2.3 Improper use 10

2.4 Environmental conditions 11

2.4.1 Vibration/shock resistance 12

2.5 Conformity 13

2.6 Warranty / repairs 14

2.7 Limitation of liability 14

3Scope of delivery....................................................................................................................15

4Mechanical installation ..........................................................................................................16

4.1 Requirements 16

4.2 Installation recess OPD9016 16

4.3Installation recess OPD9019 17

4.4 Installation recess OPD9024 17

4.5 Device installation – Sequence 18

5Electrical connections.............................................................................................................19

5.1 Requirements 19

5.2 Earthing concept 19

5.3 Interface overview 20

5.4 Power supply 20

5.5 Maximum cable lengths 21

6Commissioning.......................................................................................................................22

6.1 Requirements 22

6.2 Switching the device on 22

7Features.................................................................................................................................23

7.1 DisplayPort™ 23

7.2 HDBaseT™ 23

8Cleaning.................................................................................................................................23

9Removing the device ..............................................................................................................24

OPD9000 series −Instruction manual v1.0 4

10 Dimensional drawings ............................................................................................................25

10.1 OPD9016 25

10.2 OPD9019 26

10.3 OPD9024 27

11 Technical data........................................................................................................................28

12 Service & support...................................................................................................................29

12.1 ADS-TEC support 29

12.2 Company address 29

OPD9000 series −Instruction manual v1.0 5

1 General information about documentation

1.1 General information

The purpose of this instruction manual is to ensure the safe and efficient use of type OPD9000 −

industrial monitors, hereinafter referred to as the "device".

All of the safety instructions and handling instructions given in the manual must be obeyed in order to

ensure that work is carried out safely.

All users must read this instruction manual and have access to it at all times.

The original version of this instruction manual was written in German. All non-German versions of this

instruction manual are translations of the German instruction manual.

1.2 Explanation of safety instructions

1.2.1 Structure of safety instructions

The signal word classifies the hazard.

Reference to the type/consequences and source of the hazard is made underneath the signal word.

Information on how to avoid the hazard is indicated by an arrow ().

DANGER

Type and source of the hazard!

Possible consequences if the hazard is disregarded

Measures for avoiding the hazard

OPD9000 series −Instruction manual v1.0 6

1.2.2 Explanation of signal words

DANGER

Indicates an imminent danger. If not avoided, death or severe injury will

result.

WARNING

Indicates a possible danger. If not avoided, death or severe injury could

result.

CAUTION

Indicates a possible danger. If not avoided, light or minor injuries could

result.

ATTENTION

Indicates a possibly damaging situation. If not avoided, the system or something in its

surroundings could be damaged.

Recommendation for use:

Indicates terms and/or conditions that strictly need to be observed to ensure

optimised and/or zero-defect operation. Tips and suggestions for the efficient

use of the device and software optimisation are also provided.

OPD9000 series −Instruction manual v1.0 7

1.3 Relevant device documentation

The following documents are decisive to device setup and operation:

•This instruction manual:

contains information for installation, commissioning and operation of the device along with

technical data.

•Website:

You can download the instruction manual as well as drivers, software, user manuals, leaflets

and flyers from the Download area of our website www.ads-tec.de.

1.4 Symbols

Symbol Meaning

Label on batteries. The batteries may not be disposed of with household waste, but must

rather be disposed of separately. Used batteries must be returned to the point of sale or a

disposal system.

Label on electrical and electronic devices. Electrical and electronic devices must not be

disposed of with household waste, but must rather be taken to a collection point for waste

electrical equipment.

Symbol for the protective earth connection (PE)

Symbol for the functional earth connection (FE)

1.5 Data, figures and modifications

All data, text and figures were prepared to the best of our knowledge. They do not represent any

assurance for the properties themselves. Despite taking utmost care, no liability can be assumed for

accuracy, completeness and actuality of the information. Subject to changes.

OPD9000 series −Instruction manual v1.0 8

1.6 Trademarks

It is noted that any software and/or hardware trademarks and any company brand names mentioned in

this documentation are all subject to the general trademark protection rights.

Big-LinX®and X-Remote®are registered trademarks of ADS-TEC.

All other used third-party trademarks are hereby acknowledged.

In the case of trademark infringement, ADS-TEC reserves the right to exercise all rights.

1.7 Copyright

This instruction manual is protected by copyright. For the authorised user, simple usage rights are

granted within the scope of the intent of the contract. Any modified use or exploitation of the provided

content, particularly duplication, modification or publishing in whatever form is permitted only with the

prior consent of ADS-TEC. In the case of copyright infringement, ADS-TEC reserves the right to

exercise all rights.

OPD9000 series −Instruction manual v1.0 9

2 General device information

2.1 Manufacturer and contact details

The manufacturer of the device is ads-tec Industrial IT GmbH. The company is referred to in the

following as ADS-TEC.

ads-tec Industrial IT GmbH

Heinrich-Hertz-Str.1

72622 Nürtingen

Germany

Phone: +49 7022 2522-0

Email: mailbox@ads-tec.de

Web: www.ads-tec.de

2.2 Intended use

The device is used for the visualisation and control of a wide range of processes on systems and

machines in various application environments.

The device is intended to be installed in a recess in a wall or cabinet. Its IP protection class permits only

indoor installation.

The operator alone shall be responsible for ensuring that all operator obligations are observed and for

complying with any technical or statutory amendments that may arise.

Installation, commissioning and operation may only be performed by qualified and trained personnel.

Intervention by the user is required only for performing the actions described in this document. Should

any further modifications be required, it is necessary to consult either with the manufacturer directly or

with service personnel authorised by the manufacturer.

The device must be de-energised during service work. Appropriate measures must be taken to prevent

electrostatic discharges on components.

The device is only to be assembled, installed and operated within the permissible specifications.

Use in non-specified environments is prohibited.

OPD9000 series −Instruction manual v1.0 10

2.3 Improper use

Operation other than or beyond that described for the device shall be deemed improper use.

The device is not allowed to be used to control vehicles or for applications for which further approvals

beyond the manufacturer's declaration are necessary, e.g. applications with explosion hazard, medical

technology and shipping industry.

The product does not support any safety functions of functional safety. Do not use the product to

evaluate safety-relevant data in order to bring a system to a safe state.

The device must not be put into operation in the case of transport damage or nonconformity with the

specifications and must be taken out of operation in the case of changing conditions.

In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or damage that

is directly or indirectly attributable to the handling of the device.

If the device is opened up by an unauthorised person, the user may be subject to hazards and the

warranty is invalidated.

Should the device have evident signs of damages caused, e.g., by improper operation or storage

conditions or due to improper use or handling, it must be shut down immediately. Ensure that it is

secured against being started up accidentally.

The device can be damaged as a result of unauthorised mechanical modifications. Make sure that the

device is not drilled, chiselled or perforated and its exterior shape and design is not modified in any way!

OPD9000 series −Instruction manual v1.0 11

2.4 Environmental conditions

The device must be operated under the environmental conditions specified in the technical data.

Failure to observe any one of these conditions will invalidate the warranty of the device. ADS-TEC

cannot be held liable for any damages arising from improper use and handling.

ATTENTION

Damage caused by heat!

If the device is installed in a panel, casing or similar, heat accumulation can occur.

Make sure that heat can be dissipated from the device.

ATTENTION

Damage caused by condensation!

If the temperature of the device is different to that of the environment in which it is located,

condensation can form.

Switch on the device only after it has acclimated to the ambient temperature.

ATTENTION

Damage caused by heat!

If the device is exposed to sunlight or any other light or heat source, it can overheat and suffer

damage.

Do not expose the device to direct radiation by sunlight or any other light or heat source!

OPD9000 series −Instruction manual v1.0 12

2.4.1 Vibration/shock resistance

The vibration/shock resistance tests were performed as follows:

Vibration near machines or conveyor belts

−DUT: functional device

−Test standard: EN 60068-2-6

−Deflection shape: sinusoidal

−Test axes: X / Y / Z

−Frequency: 2-9/9-200

−Change in frequency: + 1 octave/min

−Deflection: 3 mm

−Amplitude: 10 m/s²

−Test duration: 2 h per axis

−DUT status: DUT electrically in operation

−Test criterion: Visual inspection after the test and functionality of the DUT during and after the

test

Shock resistance near machines or conveyor belts

−DUT: functional device

−Test standard: EN 60068-2-27

−Shock form: semi-sinusoidal

−Test axes: +X / +Y / +Z

−Amplitude: 250 m/s²

−Duration: 11 ms

−Test duration: 10 shocks per direction and axis

−DUT status: DUT electrically in operation

−Test criterion: Visual inspection after the test and functionality of the DUT during and after the

test

OPD9000 series −Instruction manual v1.0 13

2.5 Conformity

The manufacturer hereby declares that the product described in this instruction

manual complies with all relevant stipulations of the following European directives:

•2011/65/EU, RoHS Directive

•2014/30/EU, EMC Directive

•2014/35/EU, Low Voltage Directive

•EC 1907/2006, REACH Directive

The device is a Class A device (industrial sector). Class A may cause interference when used in

residential environments.

The EU conformity declaration can be requested at

http://www.ads-tec.de/support/support-anfrage.html and is available for download at

http://www.ads-tec.de/support/download/eg-konformitaetserklaerung.html.

Recommendation for use:

For full compliance with the EMC legislation, all components and cables used for

device connection must also be compliant with these requirements. It is therefore

necessary to employ BUS and LAN cables with shielded connectors and these

must be installed as per the instructions contained in the respective instruction

manuals.

OPD9000 series −Instruction manual v1.0 14

2.6 Warranty / repairs

During the device warranty period, any repairs must only be performed by the manufacturer or by

service personnel that has been authorised by the manufacturer.

2.7 Limitation of liability

ADS-TEC shall not be liable for personal injury, property damage or damage caused to the device as

well as consequential damage that is/was the result of non-compliance with this instruction manual,

improper use of the device, repairs and other actions on the device by unqualified electricians and

electricians not certified by ADS-TEC, or that is/was the result of using unapproved replacement parts.

Failure to observe the maintenance intervals shall also result in exclusion from liability. Furthermore, it is

strictly forbidden to make any unauthorised alterations or technical modifications to the device.

OPD9000 series −Instruction manual v1.0 15

3 Scope of delivery

Check that the contents of the package are intact: If there are signs of damage, please contact the

manufacturer immediately. The device must not be put into operation.

Check that the contents of the package are complete and match your order:

−1 x device

−1 x 3-pin connector for power supply

−Accessories according to order/delivery note

OPD9000 series −Instruction manual v1.0 16

4 Mechanical installation

4.1 Requirements

•The device is intended to be installed in a wall recess.

•The installation site must be accessible from the rear.

•The wall can be between 1.5 and 6 mm thick.

•The operating company must ensure that the wall can support the weight of the device.

4.2 Installation recess OPD9016

The external device dimensions are given in Section 10Dimensional drawings.

OPD9000 series −Instruction manual v1.0 17

4.3 Installation recess OPD9019

4.4 Installation recess OPD9024

OPD9000 series −Instruction manual v1.0 18

4.5 Device installation – Sequence

1. Depending on the orientation of the device, loosen, for

example, the left and right clamp by turning the clamping

screws clockwise (5 mm hex socket).

The clamps will protrude slightly from the housing due to

spring pressure.

2. Press the loosened clamps in, and insert the device into the

wall recess from the front.

3. Once the device is in place, the spring tension should

cause the clamps to snap over the inner edge of the wall

recess.

4. If necessary, also loosen the remaining clamps.

5. Make sure that all clamps are fully in contact with the rear

side of the recess.

6. Tighten the clamping screws, turning alternately by uniform

increments in a clockwise direction (max. 4 Nm).

OPD9000 series −Instruction manual v1.0 19

5 Electrical connections

5.1 Requirements

5.2 Earthing concept

The earthing concept essentially depends on the installation site and must be planned and implemented

by a specialist electrical engineer.

A PE earthing lug is provided in the service slot on the side of the device

Conductor cross sections:

•PE: ≥ AWG 16 (≙1.5 mm2), optimal: AWG 13 (≙2.5 mm2). The cable colour must be green-yellow.

ATTENTION

Damage due to electrostatic discharge!

Damage to the device can be caused by electrostatic discharge.

•Always adhere to the safety measures applicable when handling components at risk of being

damaged by electrostatic discharge.

ATTENTION

Damage to the electronics!

The electronics can be damaged if connectors are connected or disconnected while power is still

being applied.

•Make sure that no power is being applied when connecting and disconnecting connectors.

OPD9000 series −Instruction manual v1.0 20

5.3 Interface overview

1 Protective earth (PE) connection, see section 5.2

2 Power supply, see Section 5.4

3 DisplayPort 1.2

4 HDMI

5 3 x USB 2.0 type A

6 1 x USB 2.0 type B

7 Optional: HDBaseT extender (RJ45)

5.4 Power supply

1 Reference potential GND

(The figure shows the socket inside the device)

2 n.c.

3 +24 VDC ± 25%

Conductor cross sections: V+ / 0V: AWG 18 (≙0.75 mm2)

The permissible voltage ranges and the maximum values for the current and power

consumption can be found in Section 12.2 Technical Data.

Table of contents

Other adstec Monitor manuals

adstec

adstec MMD9016 User manual

Popular Monitor manuals by other brands

Samsung

Samsung ME32C user manual

ViewSonic

ViewSonic VA926-LED user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

AOC

AOC 9GLR Technical specifications

DMG

DMG RAFFAELLO manual

AOC

AOC LM720 - 17" Technical specifications

Sony

Sony Trinitron GDM-F500 Service manual

Memorex

Memorex MT1701 user guide

ViewSonic

ViewSonic VE510s-4 Service manual

Farenheit

Farenheit T-1503CM instruction manual

Ditel

Ditel DINOS DN129/AT Quick installation guide

Sony

Sony SDM-S51 Specifications

Kenwood

Kenwood DMX1025BT quick start guide

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Dell

Dell P3222QE user guide

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

adstec OPD9000 Series User manual

Popular Monitor manuals by other brands