ADT Blue User manual

Indoor Camera
Quick Start Guide

Welcome to Blue by ADT
You’ve made a great decision to help protect your
family and home with the purchase of your Blue by ADT
Indoor Camera.
Use your Blue Indoor Camera to watch and record
activities in your home. This WiFi-enabled security camera
can be set up with custom motion detection to record
videos or take photos.
Box Includes:
• Indoor Camera with Stand
• Power Supply
• Mounting Hardware
Before You Get Started
You will need:
• WiFi and broadband internet connection with at least
2 Mbps upload speed
• iOS or Android device
• Phillips screwdriver or drill with Phillips driver bit (optional)
• Power drill with drill bits for pilot holes (optional)

Setting Up Your
Blue by ADT Indoor Camera
Getting started is simple. Just follow these steps:
1. Plug your Blue by ADT Indoor Camera into an outlet.
2. Download the iOS or Android app by visiting
www.BluebyADT.com/apps
3. Open the app to create an account or log in to an
existing account.
4. Go to Settings > Devices > Add Device and select
your Blue Indoor Camera.
5. Follow the in-app screens to pair your device to your
WiFi network or your Blue by ADT Extender + Chime.
6. Set up the device in your desired location. Optionally,
use the included mounting template if you are
mounting the camera on a wall or ceiling.

LED Reference Guide
Your Blue Indoor Camera has an LED light on the
front of the unit. This quick reference guide will help
you understand your system’s status.
Turning On
WiFi Protected Setup (WPS) Pairing
QR Code Scanning Mode
Connected to WiFi, but Not Paired to an Account
Attempting to Connect to WiFi
Upgrading Firmware
Live Video/Audio Call
Video Clip Recording
LED Light Patterns – Blue by ADT
State

Solid Blue
Blinking Blue
Blinking Green
LED Behavior
Alternating Green & Blue
Double Blink Blue, Repeated
Double Blink Green, Repeated
Standard Mode: LED O
HomeKit Mode: Blinking Red Slowly
Standard Mode: LED O
HomeKit Mode: Blinking Blue Slowly

State
Alexa Microphone O
Alexa Idle
Alexa Call Drop-in
Alexa Do Not Disturb
Privacy On
Alexa Core – Listening, Thinking, Speaking
Alexa Alerts – Timers, Alarms, Reminders
Alexa Device Change –Volume Changes
Alexa Notications – Notication Arrives, Notication Queued
Alexa Error – System & Device Errors, Alexa Service Unavailable
Alexa – Conguration Change – Factory Reset, Wake Word Change
LED Light Patterns – Amazon Alexa

LED Behavior
Solid Red
LED O
Blinking Green
Solid Red
Solid Red
Solid Orange
Solid Yellow
Solid Purple
Solid White
Alternating Cyan and Blue
Alternating Cyan and Blue

On-Device Storage
Your camera supports on-device storage using a
Class 10 or better SD card with minimum storage
of 16GB and a maximum of 128GB.
Factory Resetting Your Blue Indoor Camera
To factory reset your device, press and hold the button
on its back for greater than 10 seconds while the device
is powered on.
Setting Up Amazon Alexa
To pair your Blue by ADT Indoor Camera with Alexa:
1. Click on Settings > Devices then choose the device
you would like to add to Alexa.
2. Select Advanced Settings for the device and tap on
“Set Up Alexa.”
3. You will be prompted to log in with Alexa to pair
your device.

Important Safety Information
1. Read and keep these instructions.
2. Heed all warnings.
3. Clean only with a dry cloth.
4. Set up in accordance with the manufacturer’s instructions.
5. Do not place this device in a conned space such as a bookcase
or similar unit without proper ventilation.
6. Do not set up near any heat sources such as radiators, heat registers,
stoves, or other devices (including ampliers) that produce heat.
7. The device shall not be exposed to water (dripping or splashing) and no
objects lled with liquids, such as vases, shall be placed on the device.
8. Only use attachments/accessories specied by the manufacturer.
9. Follow all local waste and recycling laws when disposing of batteries.
10. Use only with the stand, tripod, or bracket specied by the
manufacturer, or sold with the device.
11. Only use the AC adapter supplied with this device. Do not use a power
supply from another device or another manufacturer. Using any other
power cable or power supply may cause damage to the device and
void your warranty.
12. Do not defeat the safety purpose of the polarized plug. A polarized
plug has two blades with one wider than the other. If the provided plug
does not t into your outlet, consult an electrician for replacement of
the obsolete outlet.
13. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where where it exits
from the device.
14. Do not drop the device or subject it to physical shock.
15. Unplug this device during lightning storms or when unused for
long periods.
16. Do not use high voltage products around this device (eg. electrical
swatter) as this product may malfunction due to electrical shock.
17. Do not remove the cover. Refer all servicing to qualied service
personnel if a power-supply cord or plug is damaged, liquid was spilled,
objects fell into the device, the device was exposed to rain or moisture,
doesn’t operate normally, or was dropped.
18. WARNING: This product contains chemicals known to the State
of California to cause cancer and congenital disabilities or other
reproductive harm. Wash hands after handling.
Indoor Camera
Operating Specications
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 0% to 80% RH (non-condensing)

Regulatory Approvals
FCC Statement (US)
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designated to provide reasonable protections against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radiofrequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one of more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
FCC WARNING: This equipment may generate or use radiofrequency
energy. Changes or modications to the equipment may cause harmful
interference unless the modications are expressly approved in the
instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modication is made.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 cm between the radiator
and your body. End-users must follow the specic operating instructions
for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna
or transmitter.
Open-Source Software Notice
To obtain the source code under GPL, LGPL, MPL, and other
open-source licenses that are contained in this product, please visit
www.bluebyadt.com/opensource. In addition to the source code,
all referred license terms warranty disclaimers, and copyright notices
are available for download.

Warranty
For Blue by ADT warranty details, visit:
www.BluebyADT.com/warranty
Questions
Give us a call at 877-464-7437
or visit us at www.BluebyADT.com/support
Company Address
LifeShield, LLC
2021 Cabot Blvd. West
Langhorne, PA 19047

© 2019. LifeShield LLC dba LifeShield, An ADT Company.
All third party marks are the property of their respective owners
and used under license. Unauthorized use is strictly prohibited.
www.BluebyADT.com