ADT RC8325-ADT User manual

RC8325-ADT
https://alpha.adt.com/help/124[11/12/2018 10:22:41 PM]
RC8325-ADT
The RC8325 is a Pulse compatible day and night camera. This camera is intended for use with ADT Pulse. It
can be used as either a wired or wireless camera using Wi-Fi connectivity.
« Help Center
RC8325-ADT
RC8325-ADT
Manual RC8325-ADT Wireless Indoor HD Camera Installation Manual
Reset
The reset button has two functions:
Reboot – If your camera is unresponsive or is encountering technical issues,
you may need to reboot your camera. To reboot, press and release the Reset
button.
Clear All Data – If rebooting your camera does not resolve the issue or if you
need to re-enroll your camera to Pulse, you may need to clear all data. To
clear all data and restore the factory default settings:
1. Power on the camera
2. Press and hold the Reset button for fifteen seconds
3. When you release the Reset button, the camera is reset to the factory
default settings
Troubleshooting
Wi-Fi Camera Offline – Please refer to this page if your Wi-Fi is not connected
and is listed as “status unknown” in the ADT Pulse app.
Camera Video Quality – Please refer to this page if you are encountering
issues with your camera’s video quality.
Select

RC8325-ADT
https://alpha.adt.com/help/124[11/12/2018 10:22:41 PM]
Return to Top
Pulse Gateway Offline – The video gateway controls your wireless
connections. Please refer to this page if your device is offline or is receiving a
“Status Unavailable” message.
Specifications
Dimensions: 2.56" (W) x 1.34" (H) x 1.34" (D)
Video Compression: H.264 and MJPEG
Image Resolution: VGA (640x480), QVGA (320x240), and 720p (1280x720)
Operating Temp: 32ºF to 104ºF
Storage Temp: -4ºF to 158ºF
Network interface: 1 RJ-45 LAN connection for Ethernet through Micro
USB to RJ-45 adapter cable
Wireless Interface: IEEE 802.11n/802.11b/802.11g compatible, WEP 64/128
bit, WPA/WPA2 personal security support
LEDs: 1 Power and 1 Network/WPS LED
Power Adapter: 12V/1A, 100-240 VAC
Communication This camera can use Wi-Fi to connect to Pulse, or it can be hardwired directly to the
gateway/switch using the provided adapter.
Pulse Enrollment
This camera can be enrolled through the Manage Device section of the Web or
Admin Portal. This device must be paired to Pulse while it is wired to the gateway
using the provided adapter. For help enrolling your camera, please refer to the
Pulse Camera Add On and Replacement page.
How can we help?
Search