Advanced Bionics Cedis e100 DS Drying Kit User manual

Cedis e100 DS Drying Kit
QUICK REFERENCE GUIDE
1. Plug power cable into drying kit and open lid.
3. Depending on the amount of moisture on the processor decide whether to select:
a. Regular drying cycle (1.5 hours drying time). Press button once a red light is displayed.
b. Intensive drying cycle (3 hours drying time). Press button twice a blue light is displayed.
2. Remove battery & cable from processor and place
these with the headpiece into the drying kit.

027-N155-33 Rev A
© 2019 Advanced Bionics AG and its affiliates. All rights reserved.AB – A Sonova brand
For more information please refer to product operating instructions, and see
www.youtube.com/watch?v=Kf4RuZEsRSI
4. When drying cycle has finished then the light will go off, please open lid and
remove processor, battery, cable and headpiece.
5. Please replace the dryer should the light flash alternately red and blue.
Cedis e100 DS Drying Kit
QUICK REFERENCE GUIDE