Advanced Arianna Petrarca User manual

MAINTENANCE:
Periodically perform surface cleaning,
taking care not use abrasive materials or
substances in order to prevent its damage
Warning:
To ensure correct installation, follow these instructions.
Keep these instructions after installing the product.
This product must be installed by a qualified electrician or other authorised installer.
There are no serviceable parts in this product. Return to the manufacturer for any repairs.
Ensure the unit is not connected to the power during installation.
During installation and maintenance do not touch the glass and the reflectors to prevent
the deposit of dirt on them.
Do not use if the power cord is damaged.
This document is not subject to interpretation: if in doubt, contact the manufacturer.
Damaged safety glass must be replaced by
the manufacturer or their authorised re-sellers.
This symbol indicates that this product, once arrived at the end of life,
should not be disposed with other household waste. Users must provide a
separate collection. This behavior ensures that the equipment is treated
properly contributing to the conservation of resources of the environment.
Do not stare at the operating light source
The luminaire should be positioned so that prolonged staring into the
luminaire at a distance closer than 22m is not expected.
Caution, risk of electric shock
The light source contained in this luminaire shall only be replaced by the
manufacturer, authorised service agent or a similar qualified person.
GENERAL DATA:
Ingress protection: IP66
Impact resistance: IK08 - 5J
Electrical protection: CLASS I
Suitable for indoor use
Minimum distance to enlightened objects: 1m
Compliance: CEI EN 60598-1, CEI EN 60598-2-5, IEC TR 62778
Maximum installation height: 50m
Arianna Petrarca LED Floodlight Installation Instructions
Advanced Lighting Technologies Australia Inc | 110 Lewis Road, Wantirna South, VIC 3152 | [phone] | www.adlt.com.au
INTEGRATED DRIVER POWER CONNECTION | 4-6 MODULES PETRARCA + 2 INTEGRATED DRIVERS:
Use a H05RN-F or H07RN-F cable as power cable. Wire the power cable into the free poles of the 3-ways connector (the connector can be removed for easier installation):
A MAX 22 mm
B 8 mm
C
MIN 1.5 mm²
MAX 2.5 mm²
refer to local
requirements
D 7÷13.5 mm
AB
C
D
BROWN-PHASE
BLUE-NEUTRAL
Y/G-GROUND
CLASS I ①
②
③
④
⑤
⑥
⑦
⑧
INTEGRATED DRIVER POWER CONNECTION | 1-3 MODULES PETRARCA + 1 INTEGRATED DRIVER:
Use a H05RN-F or H07RN-F cable as power cable. Wire the power cable into the free poles of the 2-ways connector (the connector can be removed for easier installation):
A MAX 19 mm
B 6 mm
C
MIN 1.5 mm²
MAX 4 mm²
refer to local
requirements
D 7÷13.5 mm
AB
C
D
BROWN-PHASE
BLUE-NEUTRAL
Y/G-GROUND
CLASS I ①
②
③
④
⑤

1 MODULE | DIMENSIONS
Max weight = 10 kg
0.05 m2
0.06 m2
Max weight = 15 kg
143 mm
93 mm
435 mm
410 mm
470 mm
670 mm
0.10 m2
0.05 m2
0.03 m2
394 mm
234 mm
93 mm
133 mm
236 mm
0.20 m2
2 MODULES | DIMENSIONS
3 MODULE | DIMENSIONS
410 mm
435 mm
93 mm
143 mm
704 mm
905 mm
Max weight = 21 kg
0.05 m2
0.08 m2
0.29 m2
4 MODULE | DIMENSIONS
670 mm
470 mm
760 mm
435 mm
93 mm
143 mm
Max weight = 28 kg
0.36 m2
0.10 m2
0.06 m2
760 mm
143 mm
704 mm
93 mm
803 mm
Max weight = 42 kg 0.54 m2
0.10 m2
6 MODULES | DIMENSIONS
0.09 m2
Arianna Petrarca LED Floodlight Installation Instructions
Advanced Lighting Technologies Australia Inc | 110 Lewis Road, Wantirna South, VIC 3152 | [phone] | www.adlt.com.au

50 Nm
2 MODULES | BRACKET MOUNT 3 MODULES | BRACKET MOUNT
Tilt Angle
min max
-20°+77.5°
Tilt Angle
min max
-20°+77.5°
50 Nm 22 Nm
50 Nm
-20°
-10°
0°
+10°
+20°
+30°
+40°
+50°
+60°
+70°
+45°
+35°
+25°
+15°
+5°
-5°
-15°
+55°
+65°
+75°
+72,5°
+62,5°
+52,5°
+42,5°
+32,5°
+22,5°
+12,5°
+2,5°
-7,5°
-17,5°
-12,5°
-2,5°
+7,5°
+17,5°
+27,5°
+37,5°
+47,5°
+57,5°
+67,5°
+77,5°
Right Side
Left Side
50 Nm
50 Nm
22 Nm
50 Nm
Arianna Petrarca LED Floodlight Installation Instructions
Advanced Lighting Technologies Australia Inc | 110 Lewis Road, Wantirna South, VIC 3152 | [phone] | www.adlt.com.au
1 MODULE | BRACKET MOUNT

Arianna Petrarca LED Floodlight Installation Instructions
Advanced Lighting Technologies Australia Inc | 110 Lewis Road, Wantirna South, VIC 3152 | [phone] | www.adlt.com.au
6 MODULES | BRACKET MOUNT
50 Nm
50 Nm
22 Nm
Tilt Angle
min max
-20° +77.5°
-20°
-10°
0°
+10°
+20°
+30°
+40°
+50°
+60°
+70°
+45°
+35°
+25°
+15°
+5°
-5°
-15°
+55°
+65°
+75°
+72,5°
+62,5°
+52,5°
+42,5°
+32,5°
+22,5°
+12,5°
+2,5°
-7,5°
-17,5°
-12,5°
-2,5°
+7,5°
+17,5°
+27,5°
+37,5°
+47,5°
+57,5°
+67,5°
+77,5°
Right Side
Left Side
50 Nm
50 Nm 22 Nm
OPERATING POSITION IMPORTANT - OPERATING POSITIONS NOT ALLOWED
-20°
0°
+77.5°
-20°
0°
+77.5°
+77.5°
0°
-20°
+77.5°
0°
-20°
4 MODULES | BRACKET MOUNT
ADLT Revision Date: 07 08 2020 | Integrated Driver Instructions: S-+050027SMS – rev. 4 – 15/04/2019