AEG LAVATHERM 56740 User manual

LAVATHERM 56740
User manual Condenser dryer
Notice d'utilisation Sèche-linge à
condensation

Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Operating Instructions 3
Important safety information 3
Environment 5
Product description 6
Control panel 7
Control panel 7
Display 7
Before first use 8
Programme overview 8
Daily use 9
Sorting laundry 9
Average laundry weights 10
Switching machine/drum light on 10
Laundry loading 10
Selecting the programme 11
DELICATE function 11
LONG ANTI-CREASE function 11
BUZZER function 11
TIME function 12
DELAY START 12
Child lock 12
Starting the programme 12
Changing programme 12
Drying cycle complete / removing laundry
13
Care and cleaning 13
Cleaning fluff filter 13
Cleaning the door seal 15
Emptying the condensate tank 15
Cleaning heat exchanger 16
Cleaning the drum 17
Clean operating screen and housing 17
What to do if ... 17
Machine settings 19
Technical data 20
Installation 21
Appliance positioning 21
Removing transport safety packaging 21
Electrical connection 21
Changing door stop 22
Special accessories 23
Service 23
Subject to change without notice
2Contents

Operating Instructions
Important safety information
In the interest of your safety and to ensure the correct use, before installing and
first using the appliance, read this user manual carefully, including its hints and
warnings. To avoid unnecessary mistakes and accidents, it is important to ensure
that all people using the appliance are thoroughly familiar with its operation and
safety features. Save these instructions and make sure that they remain with the
appliance if it is moved or sold, so that everyone using it through its life will be
properly informed on appliance use and safety.
- Please read the instruction book before using this appliance.
General safety
• It is dangerous to alter the specifications or attempt to modify this product in any way.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for
their safety.
• Make sure that small children and pets do not climb into the drum. To avoid this, please
check into the drum before using.
• Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp
material can cause extensive damage and must not be placed into the machine.
• In order to avoid danger of fires caused by excessive drying, do not use appliance to dry
the following items: Cushions, quilts and the like (these items accumulate heat).
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed
articles and clothes or pillows fitted with foam rubber pads should not be dried in the
tumble dryer.
• Always unplug the appliance after use, cleaning and maintenance.
• Under no circumstances should you attempt to repair the machine yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact
your local Service Centre. Always insist on genuine spare parts.
• Items that have been soiled with substances such as cooking oil acetone, petrol, kerosene,
spot removers, turpentine, waxes and wax removers should be washed in hot water with
an extra amount of detergent before being dried in the tumble dryer.
•Danger of explosion: Never tumble dry items that have been in contact with inflam-
mable solvents (petrol, methylated spirits, dry cleaning fluid and the like). As these sub-
stances are volatile, they could cause an explosion. Only tumble dry items washed with
water.
•Risk of fire: items that have been spotted or soaked with vegetable or cooking oil
constitute a fire hazard and should not be placed in the tumble dryer.
• If you have washed your laundry with stain remover you must execute an extra rinse
cycle before loading your tumble dryer.
• Please make sure that no gas lighters or matches have accidentally been left in pockets
of garments to be loaded into appliance
Important safety information 3

WARNING!
•Never stop a tumble dry before the end of the drying cycle unless all items are
quickly removed and spread out so that the heat is dissipated. Risk of fire!
•Lint must not be allowed to accumulate around the tumble dryer.
•Risk of electric shock! Do not spray down the appliance with jets of water.
• The final part of a tumble dryer cycle occurs without heat ( cool down cycle ) to ensure
that the items are left at a temperature that ensures that items will not be damaged.
• The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
• Ensure you have good ventilation in the installation room to avoid the back flow of gases
into the room from appliances burning other fuels, including open fires.
Installation
• This appliance is heavy. Care should be taken when moving it.
• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it
and contact the Service Centre.
• All packaging must be removed before use. Serious damage can occur to the product
and to property if this is not adhered to. See relevant section in the user manual.
• Any electrical work required to install this appliance should be carried out by a qualified
electrician or competent person.
• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air
to circulate freely under the appliance.
• After having installed the appliance, check that it is not pressing or standing on its
electrical supply cable.
• If the tumble dryer is placed on top of a washing machine, it is compulsory to use the
stacking kit (optional accessory).
Use
• This appliance is designed for domestic use. It must not be used for purposes other than
those for which it was designed.
• Only wash fabrics which are designed to be machine dried. Follow the instructions on
each garment label.
• Do not dry unwashed items in the tumble dryer.
• Do not overload the appliance. See the relevant section in the user manual.
• Clothes which are dripping wet should not be placed in the dryer.
• Garments which have been in contact with volatile petroleum products should not be
machine dried. If volatile cleaning fluids are used, care should be taken to ensure that
the fluid is removed from the garment before placing in the machine.
• Never pull the power supply cable to remove the plug from the socket; always take hold
of the plug itself.
• Never use the tumble dryer if the power supply cable, the control panel, the working
surface or the base are damaged so that the inside of the tumble dryer is accessible.
• Fabric softeners, or similar products should be used as specified by the fabric softener
instructions.
•Caution - hot surface : Do not touch the door light cover surface when the light is
switched on.
(Only dryers equipped with internal drum light)
4Important safety information

Child safety
• This machine is not intended for use by young children or infirm persons without su-
pervision.
• Children often do not recognise the hazards associated with electrical appliances. Chil-
dren should be supervised to ensure that they do not play with the appliance.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children
- danger of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s reach.
• Make sure that children or pets do not climb into the drum.
Environment
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
your local council, your household waste disposal service or the shop where you purchased
the product.
Environmental tips
• In the dryer, laundry becomes fluffy and soft. Fabric softeners are not therefore needed
when washing.
• Your dryer will function most economically if you:
– Always keep the ventilation slots on the base of the dryer unobstructed;
– Use the loading volumes specified in the programme overview;
– Ensure you have good ventilation in the installation room;
– Clean the micro-fine filter and fine strainer after each drying cycle;
– Spin the laundry well before drying.
Energy consumption depends on spinning speed set in washing machine. Higher spinning
speed - lower energy consumption.
Environmental information
The packaging materials are environmentally friendly and can be recycled. The plastic com-
ponents are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging
materials in the appropriate container at the community waste disposal facilities.
WARNING!
When the unit is no longer being used:
• Pull the plug out of the socket.
• Cut off the cable and plug and dispose of them.
• Dispose of the door catch. This prevents children from trapping themselves inside and
endangering their lives.
Environment 5

Product description
11
2
3
7
9
12
5
1
4
8
10
6
1Control panel
2Water reservoir
3Drum light
4Fine fluff filters
5Course fluff filters
6Fluff filters
7Rating plate
8Loading door (reversible)
9Heat exchanger door
10 Button for opening door in plinth
11 Ventilation grille
12 Adjustable feet
6Product description

Control panel
Control panel
6 5 4
321
1Programme selector and on/off switch
2Function buttons
3START PAUSE button
4DELAY START button
5Display
6Status LED
Display
Display description
-
-delay start child lock
- -
cycle duration time program scope (10 min -
3h) delay start scope
Control panel 7

Before first use
In order to remove any residues which may have been produced during production, wipe
the dryer drum with a damp cloth or carry out a brief drying cycle (ca. 30 min.) with damp
cloths in the machine.
Programme overview
Programmes max.
load
1)
Application/properties Options Care
mark
COTTONS
EXTRA DRY 7 kg Thorough drying of thick or multi- layered
fabrics, e.g. terry towelling items, bathrobes.
all except
TIME
CUPBOARD
DRY 7 kg
Thorough drying of fabrics of even thick-
nesses, e.g. terry towelling items, knitwear,
towels.
all except
TIME
IRON DRY 7 kg For normal thickness cotton or linen laundry,
e.g. bedding, table linen.
all except
TIME
EASY CARE
EXTRA DRY 3 kg Thorough drying of thick or multi-layered
fabrics, e.g. pullovers, bedding, table linen.
all except
TIME
CUPBOARD
DRY 3 kg
For thin fabrics which are not ironed, e.g. easy
care shirts, table linen, baby clothes, socks,
lingerie with bones or wires.
all except
TIME
IRON DRY 3 kg For thin fabrics which are also to be ironed,
e.g. knitwear, shirts.
all except
TIME
special
TIME PRO-
GRAMME 7 kg For drying of individual items of laundry. all
FRESHEN-UP 1 kg For refreshing textiles that have been in stor-
age.
all except
TIME
BED LINEN 3 kg Bed linen (single and double sheet, pillow-
case, bedspread, duvet cover).
all except
TIME
JEANS 7 kg
For leisure clothing, such as jeans, sweat-
shirts, etc., of different material thicknesses
(e.g. at the neck, cuffs and seams).
all except
TIME
SPORTS LIGHT 2 kg For sportswear, thin fabrics, polyester, which
are not ironed.
all
2)
except
TIME
8Before first use

Programmes max.
load
1)
Application/properties Options Care
mark
EASY IRON
PLUS
1 kg (or
5
shirts)
Special program with anti-crease mecha-
nism for easy care fabrics such shirts and
blouses; for minimum ironing effort. The re-
sults depend on the type of fabric and its
finish. Place fabrics in the dryer straight after
spinning; once dried, immediately remove
fabrics and place on a clothes hanger.
all
2)
except
TIME
WOOL CARE 1 kg
Special programme for briefly treating wool-
lens with warm air, after they have been
dried naturally, worn or stored for long pe-
riods. Wool fibres stand up and the wool be-
comes soft and cosy. Recommendation: re-
move fabrics immediately after drying.
DELICATE
BUZZER, DE-
LAY START
1) maximal weight of dry clothes
2) DELICATE set as default
Daily use
Sorting laundry
• Sort by fabric type:
– Cotton/linen for programmes in COTTONS programme group.
– Mixtures and synthetics for programmes in SYNTHETICS programme group.
• Sort by care label: The care labels mean:
Drying in the tumble dryer possible in principle
Drying at normal temperature
Drying at reduced temperature
Drying in the tumble dryer not possible
Do not place in the appliance any wet laundry which is not specified on the care label as
being suitable for tumble-drying.
This appliance can be used for all wet laundry items which are labelled as suitable for
tumble-drying.
• Do not dry new, coloured textiles together with light-coloured laundry items. Textile
colours may bleed.
• Do not dry cotton jersey and knitwear with the EXTRA programme. Items may shrink!
• Wool and wool-like textiles can be dried using the WOOL CARE programme.
Preparing laundry
• To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties
or ribbons (e.g. of aprons).
• Empty pockets. Remove metal items (paper clips, safety pins, etc).
• Turn items with double-layered fabrics inside out (e.g. with cotton-lined anoraks, the
cotton layer should be outermost). These fabrics will then dry better.
Daily use 9

Do not overload the appliance. Observe max. loading volume of 7kg.
Average laundry weights
bathrobe 1200 g
quilt cover 700 g
man’s work shirt 600 g
man’s pyjamas 500 g
sheet 500 g
tablecloth 250 g
man’s shirt 200 g
night dress 200 g
pillow case 200 g
towelling towel 200 g
blouse 100 g
ladies’ briefs 100 g
men’s underpants 100 g
napkin 100 g
tea cloth 100 g
Switching machine/drum light on
Turn the programme selector to any programme or turn it to DRUM LIGHT. The machine
has been switched on. When the loading door is opened, the drum light is illuminated.
Laundry loading
1. Open loading door:
Use force to push against the loading door
(push point)
2. Load your laundry (do not force it in).
CAUTION!
Do not jam laundry in between the loading
door and rubber seal.
3. Close loading door securely. Lock must
audibly lock.
10 Daily use

Selecting the programme
Use the programme selector to set the programme
you require. The estimated time to end of the pro-
gramme appears in the LCD in h:mm format
(hours:minutes).
During the cycle time elapses by steps of one mi-
nute; less than 1 hour the leading zeros are not
shown (ex. “59”, “5”, “0”).
DELICATE function
For especially gentle drying of sensitive fabrics
with the care label and for temperature-sen-
sitive textiles (e.g. acrylic, viscose). Programme is
executed with reduced heat.
Delicate function is only suitable for use with
loads of up to 3kg.
To activate it:
1. Choose the drying programme.
2. Press DELICATE button (1) - the LED above is on.
To deselect function press again DELICATE button (1). The LED above is off.
LONG ANTI-CREASE function
This function prolongs anti-crease phase what gives 90 min. in total. The drum rotates in
intervals during this phase. The laundry thereby remains relaxed and free of creases.
To activate it:
1. Choose the drying programme.
2. Press LONG ANTI-CREASE button (2) - the LED above is on.
To deselect function press again LONG ANTI-CREASE button (2). The LED above is off.
If this additional function is selected, the anti-crease phase at the end of the drying cycle
is lengthened by 60 minutes. The laundry can be removed at any time during the anti-
crease phase.
BUZZER function
The appliance is supplied with the BUZZER function deactivated.
The buzzer sounds or plays a tune when activated during:
– cycle end
– anti-crease phase and when phase starts or ends
– cycle interruption by a warning
–alarm
To activate it:
1. Choose the drying programme.
2. Press BUZZER button (3) - the LED above is on.
1234 5
6
Daily use 11

To deselect function press again BUZZER button (3). The LED above is off.
TIME function
To select the programme duration after setting the TIME PROGRAMME . You can select a
programme duration from 10 mins to 3 hrs in 10-minute steps.
1. Turn the programme knob to the TIME PROGRAMME. The blinking 10' appears in the
display. (corresponding to the cooling phase).
2. Press the TIME button (4) repeatedly until the desired programme duration is shown in
the display, e.g. for a programme of 20 minutes.
If the programme duration is not selected, the duration is automatically set to 10 mins.
DELAY START
With the DELAY START button (6), you can delay the start of a programme by be-
tween 30 minutes (30') and a maximum of 20 hours (20h).
1. Select the programme and additional functions if necessary.
2. Press the DELAY START button (6) as many times as necessary until the required start
delay appears on the display, e.g. if the programme is to be started in 12 hours.
If the display is showing 20h and you press the button again, the time delay will
be cancelled. The display will show 0' and then the duration of the selected pro-
gramme.
3. To activate the delay timer, press the START PAUSE button (5). The amount of time
remaining until the programme is set to start is continuously displayed (e.g. 15h, 14h,
13h, … 30' etc).
The delay time icon is on.
Child lock
The child lock can be set to prevent a programme being accidentally started or a programme
in operation being accidentally changed. The child lock function locks all buttons and the
programme knob. The child lock can be activated or deactivated by holding down the
BUZZER (3) and TIME (4) buttons simultaneously for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The icon appears in the display to indicate that the child safety device is activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.
Starting the programme
Press the START PAUSE button (5). The LED above stops flashing, becomes steady. The
programme is started. Display shows elapsing cycle time or delay time if activated.
Changing programme
To change a programme which has been selected by mistake once the programme has
started, first turn the programme selector to OFF and then reset the programme.
12 Daily use

The programme can no longer be changed directly once the programme has started. If
nevertheless there is an attempt to change the programme on the programme knob, the
programme progress display and the maintenance indicators flash. If an option (excluding
the buzzer ) is set, Err appears in the multidisplay. The drying programme is not however
affected by this (laundry protection).
Drying cycle complete / removing laundry
Once the drying cycle is complete, display shows a blinking . If the BUZZER button has
been pressed, an acoustic signal sounds intermittently for about one minute.
The drying cycles are automatically followed by an anti-crease phase which lasts around
30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose
and free of creases. The laundry can be removed at any time during the anti-crease phase.
(The laundry should be taken out towards the end of the anti-crease phase at the latest to
prevent creases from forming.) If long anti-crease function has been selected, the anti-
crease phase is lengthened by 60 minutes.
1. Open door.
2. Before removing the laundry, remove fluff from the micro-fine filter. It is best to use
a damp hand for this purpose. (See “Care and cleaning” chapter.)
3. Remove laundry.
4. Turn the programme selector to OFF.
After each drying cycle:
- Clean the micro-fine filter and fine filter
- Drain the condensed water container
(See chapter “Care and cleaning”.)
5. Close the door.
Care and cleaning
Cleaning fluff filter
The filters collect all the fluff which accumulates during drying. To ensure that the dryer
works perfectly, the fluff filters (micro-fine filter and fine strainer) must be cleaned after
every drying cycle.
The warning led is on to remind you this operation.
CAUTION!
Never operate the dryer without fluff filters or with damaged or blocked fluff filters.
Care and cleaning 13

1. Open loading door
2. Use a damp hand to clean the micro-
fine filter, which is built into the lower
part of the loading aperture.
3. After a period of time, a patina due to
detergent residue on laundry forms on
the filters. When this occurs, clean the
filters with warm water using a brush.
Remove the filter from the door pulling
it out. It can be positioned with the tooth
facing to the left or to the right).
After cleaning do not forget to put it
back.
4. Push down unlock button on large mesh
filter.
Large mesh filter jumps up.
5. Take out fine strainer.
6. Remove fluff from fine strainer. It is best
to use a damp hand for this purpose.
Clean the entire filter area
The strainer area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
7. To do this, grip the top of the large mesh
filter and pull it forwards until it comes
loose from the two brackets.
14 Care and cleaning

8. Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for this
purpose.
9. Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
10. Re-insert fine strainer.
11. Press against the large mesh filter until
it locks into the interlock.
If the fine strainer is not fitted, the large mesh
filter will not snap into place and the loading door
cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
Emptying the condensate tank
Empty condensate tank after every drying cycle.
If the condensate tank is full, an active programme will break off automatically and the
warning led light up. In order to continue the programme, the condensate tank must first
be emptied.
WARNING!
The condensate is not suitable for drinking or for preparing foodstuffs.
1. Take out drawer containing condensed
water container completely 1and pull up
the condensed water container’s drain-
age pipe as far as it will go 2.
1
2
Care and cleaning 15

2. Pour condensed water out into a basin or
similar receptacle.
3. Slide outlet connections in and refit con-
densate tank.
If the programme has been interrupted as
a result of the condensate tank being full:
Press the START PAUSE button to contin-
ue the drying cycle.
The condensate tank has a volume of approx.
4 litres. This is sufficient for around 7 kg of
laundry which has previously been spun at 1000 revolutions/ minute.
The condensate can be used as distilled water, e.g. for steam ironing. However first filter
the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
Cleaning heat exchanger
If the warning led is lighting, the heat exchanger needs to be cleaned.
CAUTION!
Operating when the heat exchanger is blocked with fluff can damage the dryer. This also
increases energy consumption.
1. Open door.
2. Open door in plinth. To do this, press the
release button on the bottom of the door
aperture and open the door in the plinth
to the left.
3. Clean fluff from the inside of the door and
the heat exchanger front chamber. Wipe
the door seal with a damp cloth.
4. Turn both lock washers inwards.
16 Care and cleaning

5. Use the handle to pull the heat exchanger
out of the base and carry it horizontally
to prevent any remaining water from
spilling.
6. To empty the heat exchanger, hold verti-
cally over a washing-up bowl.
CAUTION!
Do not use sharp objects to clean. The heat
exchanger could develop leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with a hand-held shower.
8. Replace heat exchanger and lock into place (turn both lock washers outwards until they
snap into place).
9. Close door in plinth.
CAUTION!
Never operate the dryer without the heat exchanger.
Cleaning the drum
CAUTION!
Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on the inside of the
drum. The degree to which the laundry has been dried is then no longer detected reliably.
The laundry is damper than expected when removed from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of
the drum and drum ribs.
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
Problem
1)
Possible cause Remedy
Dryer does not
work.
Dryer not connected to mains supply. Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Loading door opened. Close loading door
The START PAUSE button not pressed. Press the START PAUSE button.
Unsatisfacto-
ry drying re-
sults.
Incorrect programme set. Set suitable programme.
2)
Fluff filters clogged. Clean fluff filters.
3)
What to do if ... 17

Heat exchanger clogged. Clean heat exchanger.
3)
Max. loading exceeded. Respect max. loading volume.
Covered ventilation grill. Uncover ventilation grill in base area.
Residue inside the drum. Clean the drum inside.
High water hardness. Set suitable water hardness
4)
.
Loading door
does not close Filters not locked in place. Install fine filter and/or snap course fil- ter into place.
Err ( Error ) on
the LCD.
5)
Attempt to change parameters after
start of the programme.
Turn the dryer off and on. Set requested
parameters.
No drum light Programme selector in OFF position. Turn it to DRUM LIGHT (if available) or
to any programme.
Defective light bulb. Replace light bulb (see next section).
Abnormally
elapsing time
on the LCD
5)
Time to end is calculated on the basis
of: type, volume and dampness of laun-
dry.
Automatic process; this is not a ma-
chine fault.
Programme
inactive Full water reservoir. Empty water reservoir
3)
, press START
PAUSE button.
Drying cycle
to short
Small laundry volume./Too dry laundry
for selected programme.
Select time programme or higher drying
level (e.g. EXTRA DRY).
Drying cycle
to long
6)
Fluff filters clogged. Clean fluff filters.
To high loading volume. Respect max. loading volume.
Laundry insufficiently spun. Spun adequately the laundry.
Particularly high room temperature -
no machine fault. Lower the room temperature if possible.
1) In case of error message on the LCD (e.g. E51 - only dryers with the LCD): Switch the dryer off and on. Set
programme. Press the START PAUSE button. Does not work? - inform local service and quote the error code.
2) follow program recommendation - see Programme overview chapter
3) see Care and cleaning chapter
4) see Machine settings chapter
5) only dryers with the LCD
6) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section).
Changing the bulb for interior lighting
Only use a special bulb which is designed specially for dryers. The special bulb can be
obtained from your local service centre.
When the appliance is switched on, the interior lighting switches itself off after 4 minutes
when the door is open.
WARNING!
Do not use standard bulbs! These develop too much heat and may damage the machine!
Before replacing the bulb, disconnect the mains plug; with a permanent connection: fully
unscrew or deactivate the fuse.
18 What to do if ...

1. Unscrew cover above the bulb (this can be found directly behind the loading aperture,
at the top; refer to “Description of machine” section.)
2. Replace defective bulb.
3. Screw cover back down.
Check the correct positioning of o-ring gasket before screwing back the door light cover.
Do not operate the dryer when missing o-ring gasket on door light cover.
WARNING!
For safety reasons, the cover must be screwed down tightly. If this is not done, the dryer
must not be operated.
Machine settings
Setting Implementation
Buzzer permanent
on/off 1. Turn the programme selector to any programme.
2. Press simultaneously the DELICATE and LONG ANTI-CREASE buttons
and hold down for approx. 5 seconds.
– diode above BUZZER button starts lighting - buzzer permanently
on.
– lighting diode comes off - buzzer permanently off.
3. The buzzer is by default always off. You can use the BUZZER button
to activate or deactivate sound but the machine does not memorize
your selection.
Water hardness
1)
1. Turn the programme selector to any programme.
2. Press simultaneously the DELICATE and TIME buttons and hold down
for approx. 5 seconds. The current setting is on the display:
–low conductivity <300 S/cm
–medium conductivity 300-600 S/cm
–high conductivity >600 S/cm
3. Press the START PAUSE button sequentially until you set desired level.
4. To memorize setting press simultaneously the DELICATE and TIME
buttons or turn knob to OFF position
Emptying water res-
ervoir - warning LED
off
2)
1. Turn the programme selector to any programme.
2. Press simultaneously the LONG ANTI-CREASE and TIME buttons and
hold down for approx. 5 seconds.
The current setting is on the display:
–warning icon and - warning message is off
–warning icon and - warning message is switched on
1) Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to
geographical locations thus varying its conductivity values. Relevant variations of the conductivityof the water
compared to those prefixed by the factory could slightly influence the residual humidity of the laundry at the
end of the cycle. Your dryer allows you to regulate the sensitivity of the drying sensor based on conductivity
values of the water.
2) By default the warning LED is always on at the end of the drying cycle or during the cycle if the water reservoir
is full. When using an external drain for the condensed water warning can be offi
Machine settings 19

Technical data
Parameter Value
Height x width x depth 85 x 60 x 58 cm
Drum volume 108 l
Depth with loading door open 109 cm
Height can be adjusted by 1.5 cm
Weight when empty approx. 40 kg
Loading volume (depends on programme)
1)
max. 7kg
Voltage / Frequency 230-240 V / 60Hz
Required fuse 13 A
Total power 2500 W
Energy efficiency class C
Energy consumption (7 kg of cotton, pre-
drained at 1000 rpm)
2)
4.4 kWh
Average annual energy consumption 298.7 kWh
Use Domestic
Permissible ambient temperature + 5°C to + 35°C
Consumption values
The consumption values have been established under standard conditions. They may deviate when
the machine is operated in domestic circumstances.
Programme Energy consumption in kWh / average dry-
ing time in min.
COTTON CUPBOARD DRY
3)
4.4 / 130 (7 kg load pre-drained at 1000 rpm)
4,2 (7 kg load pre-drained at 1200 rpm)
3,9 (7 kg load pre-drained at 1400 rpm)
3,4 (7 kg load pre-drained at 1800 rpm)
COTTON IRON DRY
3)
3.41 / 100 (7 kg load pre-drained at 1000 rpm)
SYNTHETICS CUPBOARD DRY
3)
1.36 / 48 (3 kg load pre-drained at 1200 rpm)
1) Different loading volume data may be needed in some countries as a result of different measuring methods.
2) in accordance with EN 61121
3) Hints for test institutes: cycle has to be checked in accordance with EN 61121
20 Technical data