AEG ARCTIS User manual

ARCTIS
Freezer
Frysskåp
Pakastekaapi
Operating instructions
Bruksanvisning
Käyttöohje
PERFEKT IN FORM UND FUNKTION

2
Dear customer,
Before placing your new refrigerator/freezer into operation please read
these operating instructions carefully. They contain important
information for safe use, for installation and for care of the appliance.
Please keep these operating instructions for future reference. Pass
them on to possible new owners of the appliance.
These operating instructions are for use with several technically com-
parable models with varying accessories. Please observe the notes
which apply to your model.
Notes which are important for your safety or for the proper function-
ing of the appliance are stressed with a warning triangle and/ or with
signal words (Warning!, Caution!, Important!). Please observe the fol-
lowing carefully.
☞1. This symbol guides you step by step in the operation of the appliance.
2.
Supplementary information regarding operation and practical applica-
tions of the appliance appear after this symbol.
Tips and notes concerning economical and environmentally sound use
of the appliance are marked with the cloverleaf.
The operating instructions contain instructions for the correction of
possible malfunctions by the user in the section "What to do if ...". If
these instructions should not be sufficient, please contact your local
Customer Care Department.
Printed on paper manufactured with environmentally sound proceses
he who thinks ecologically acts accordingly...

3
Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Disposal of old Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remove transport packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Building-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
View of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Ice packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Prior to Initial Start–Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Operating and indicator panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Warning system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Starting up and temperature regulation . . . . . . . . . . . . . . . . . . . . . .13
Switching off the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Freezing and storing frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Storage Goods Symbol/Freezing Calendar . . . . . . . . . . . . . . . . . . . . .15
Preparation of Ice Cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Magnetic door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Energy Saving Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Correcting Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Noises during operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Regulations, Standards, Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Technical terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

4
Safety
The safety aspects of our refrigerators comply with accepted technical
standards and the German Appliance Safety Law. Nevertheless, we con-
sider it our obligation to make you aware of the following safety
information:
Intended use
• The freezer is intended for use in the home. It is suitable for the fre-
ezing of fresh food and storing frozen food, as well as for making
ice. If the appliance is used for purposes other than those intended
or used incorrectly, no liability can be accepted by the manufacturer
for any damage that may be caused.
• Alterations or changes to the freezer are not permitted for reasons
of safety.
• If you use the freezer in a commercial application or for purposes
other than the freezing or frozen storage of foods, the manufacturer
accepts no liability for any damages which may occur.
Prior to initial start–up
• Check the appliance for transport damage. Under no circumstance
should a damaged appliance be plugged in. In the event of damage,
please contact your supplier.
• Ensure that the appliance does not stand on the electrical supply
cable. Important: if the supply cable is damaged, it must be replaced
by authorised service or qualified personnel using a special cable of
the same type.
Refrigerant
The refrigerant isobutane (R600a) is contained within the refrigerant
circuit of the appliance, a natural gas with a high level of environmen-
tal compatibility, which is nevertheless flammable.
• During transportation and installation of the appliance, be certain
that none of the components of the refrigerant circuit become
damaged.
• If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition;
– thoroughly ventilate the room in which the appliance is situated.
Safety of children
• Packaging (e.g. wraps, polystyrene) can be dangerous for children.
There is a risk of suffocation! Keep packaging material away from
children!

5
Safety
• Please make old appliances unusable prior to disposal. Pull out the
mains plug, cut off the mains cable, break or remove spring or bolt
catches, if fitted. By doing this you ensure that children cannot lock
themselves in the appliance when playing (there is risk of suffocati-
on!) or get themselves into other dangerous situations.
• Often children cannot recognise the hazards present in household
appliances. It is therefore important that you ensure adequate super-
vision and never let children play with the appliance!
Daily Operation
• Containers with flammable gases or liquids can leak at low tempera-
tures. There is a risk of an explosion! Do not store any containers
with flammable materials such as spray cans, fire extinguisher refill
cartridges etc in the refrigerator/freezer.
• Bottles and cans must not be placed in the freezer. They can burst
when the contents freeze, high carbonate content drinks can even
explode! Never store lemonade, juices, beer, wine, sparkling wine etc.
in the freezer. Exception: high alcohol content spirits can be stored
in the freezer.
• Do not put ice creams or ice cubes in the mouth immediately after
removal from the freezer. Very cold ice can freeze to the lips or ton-
gue and cause injury.
• Do not touch frozen food with wet hands. Your hands could stick to
the food causing skin abrasions.
• Do not operate any electrical appliances in the refrigerator/freezer
(e.g. electric ice cream makers, mixers etc.).
• Before cleaning the appliance, always switch off the appliance and
unplug it, or disconnect from the electricity supply.
• When unplugging always pull the plug from the mains socket, do not
pull on the cable.
In case of malfunction
• If a malfunction occurs on the appliance, please look first in the
"What to do if ..." section of these instructions. If the information
given there does not help, please do not perform any further repairs
yourself.
• Refrigerators/freezers may only be repaired by qualified service engi-
neers. Improper repairs can give rise to significant hazards. If your
appliance needs repairing, please contact your specialist dealer or our
Customer Service.

6
Disposal
Appliance Packaging Information
All materials are environmentally sound! They can be disposed of or
burned at an incinerating plant without danger.
About the materials: The plastics can be recycled and are identified as
follows:
>PE< for polyethylene, e.g. the outer covering and the bags in the
interior.
>PS< for polystyrene foam, e.g. the pads, which are all free of chloro-
fluorocarbon.
The carton parts are made from recycled paper and should be disposed
of at a waste-paper recycling collection location.
Disposal of old Appliances
For environmental reasons, refrigeration appliances must be disposed
of properly. This applies to your old appliance, and - at the end of its
service life - for your new appliance as well.
Warning! Before disposing of old appliances make them inoperable.
Remove plug from mains, sever the power cable, remove or destroy any
snap or latch closures. This ensures that playing children do not lock
themselves inside the appliance (danger of suffocation!) or place
themselves into other life-endangering situations.
Disposal:
• The appliance may not be disposed of with domestic waste or bulky
refuse.
• The refrigerant circuit, especially the heat exchanger at the back of
the appliance, must not be damaged.
• Information concerning collection schedules or locations can be
obtained from your local Council or Environmental Health Office.
Remove transport packaging
The appliance and the interior fittings are protected for transport.
☞1. Pull off the adhesive tape on the left and right side of the door.
2. Remove all adhesive tape and packing pieces from the interior of the
appliance.

7
Installation
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use and efficient performance of the appliance is affected by
the ambient temperature.
The appliance should therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature
corresponds to the climate classification, for which the appliance is
designed.
The climate classification can be found on the rating plate, which is
located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for
each climate classification:
Installation directly under a hob is not allowed. The temperatures of
the hob, which in part are quite high, may damage the appliance.
If a hob is installed near the appliance, the corresponding installation
and safety instructions must be adhered to. Considering the numerous
installation conditions which are possible, there is no way of providing
detailed information here.
It is necessary to avoid overheating of the refrigerator by maintaining
adequate distances from heat sources and by the use of a suitable
thermal insulation plate. Proper ventilation of the appliance must also
be ensured.
Climate classification for an ambient temperature of
SN +10 to +32 °C
N+16 to +32 °C
ST +18 to +38 °C
T+18 to +43 °C

8
Installation
Electrical connection
A correctly installed, earthed socket is required for the electrical sup-
ply. The supply must have a fuse rating of at least 10 Amps. If the
socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance
from the mains (e.g. a fused spur).
Before initial start-up, refer to the appliance rating plate to ascertain
if supply voltage and current values correspond with those of the
mains at the installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
The mains cable may only be changed by a qualified electrician or
competent person. If your appliance needs repairing, please contact
your local Customer Care Department.
☞
Building-in
See installation instructions supplied.
Please check whether, after installing your appliance and especially
after rehingeing the door, the door seal seals right round. An untight
door seal may lead to heavy frosting and thereby to a higher power
consumption (see also „What to do if...“).

1 = Drawer for storage and freezing fresh food
2 = Drawer for storage and freezing fresh food
3 = Drawer for storing frozen food only
4 = Drawer for storing frozen food only
5 = Temperature display
6 = Control panel
7 = Rating plate
8 = Magnet holder for door alarm
The freezer has stops to prevent the drawers from falling out
when fully extended.
To remove the drawers (e.g. for cleaning purposes), pull them out
as far as the stops, lift and extract.
9
Description of the appliance
View of the appliance
➅
➆
➄
➇
➂
➃
➁
➀

10
Prior to Initial Start–Up
☞1. Please clean the appliance interior and all accessories prior to initial
start-up (see section: “Cleaning and Care”).
2. Remove the ice packs from the appliance.
3. Only put the ice packs to freeze in the top drawer after the optimum
storage temperature of –18°C has been reached.
4. Re-freeze thawed ice packs in the same way, e. g. after cleaning the
appliance.
Ice packs
There are two ice packs in one drawer of the freezer.
Refer to the section “Prior to Initial Start–Up” concerning freezing of
the ice packs.
In the event of a power failure or malfunction, the ice packs will
lengthen the amount of time it takes for the frozen food to defrost by
several hours.
The ice packs can only fulfil this task if they are placed in the upper-
most drawer, at the front, above the frozen food.
You can use the ice packs for cooling cold bags.

11
Operating and indicator panel
Important! Only use the appliance when built-in!
1Fast freeze button, also used to switch off the warning tone
2Fast freeze light (yellow)
3Warning light (red)
4Pilot light (green)
5ON/OFF switch
6Thermostat control knob
The appliance can be activated/deactivated by pressing the ON/OFF
switch (5).
A coin in needed to turn the thermostat control knob (6). This makes
it more difficult to change the temperature setting accidentally (child
protection).
The thermostat control knob (6) can be used for the variable setting
of the storage temperature for your frozen food.
The optimum storage conditions occur at
-18°C and can be checked at the thermome-
ter (fig.).
The green pilot light (4), which comes on when the appliance is
switched on and the mains voltage is available. In this switch position,
the refrigerating unit operates automatically.
The fast-freeze button (1) with its yellow pilot light (2). The yellow
pilot light comes on when the switch (1) has been operated. The refrig-
erating unit then operates continuously.
The red temperature warning light (3) comes on when:
– the appliance has been started up but the storage temperature has
not yet been reached;
– the minimum storage temperature is no longer being maintained
(fault);
➀➁ ➃ ➄ ➅➂

12
Operating and indicator panel
– excessive amounts of fresh food are placed inside; or
– if the appliance door is open for too long.
Warning system
The warning system comprises of an optical warning light (red) and an
acoustic warning tone. The red warning light and the warning tone
signal an alarm
– if the appliance door is left open too long;
– if the temperature in the freezer compartment is too warm;
– if there is a malfunction in the cooling system.
"Open Door" warning
The warning tone sounds if the door is left open for more than 60
seconds.
• You can switch off the warning tone by closing the door.
Temperature Warning
The red warning light illuminates and the warning tone sounds if the
temperature in the freezer compartment is warmer than -12°C.
An increase in the temperature in the freezer compartment may be
caused by
- frequent or extended opening of the door;
- storing large quantities of warm food;
- a high ambient temperature;
- a malfunction in the cooling system.
☞1. Switch off the warning tone by pressing the fast freeze button. The
yellow fast freeze light illuminates. The red warning light remains illu-
minated until the required temperature has been reached again.
2. After the storage temperature has been reached, press the fast freeze
button again to switch off the fast freeze function. The yellow light
goes out.
Note: when the appliance is switched on for the first time, the warn-
ing light and the warning tone signal an alarm because the necessary
storage temperature in the freezer compartment has not yet been
reached.

13
Starting up and temperature regulation
Switch the appliance on by pressing the ON/OFF switch (5).
The following effects are of significance in respect of the interior tem-
perature:
– Ambient temperature;
– Quantity and temperature of the food stored;
– Frequency with which the door is opened and how long it is left
open.
The following temperature settings can therefore only be considered as
recommendations that may well need to be adapted to suit your par-
ticular situation.
Setting „•“ means:
refrigeration off.
Setting „1“ means:
highest, warmest internal temperature
Setting „4“ means:
lowest, coldest internal temperature
Recommended regulator setting:
„2-3“.
☞1. Turn the thermostat control knob (1) in the direction of “1”.
The green light (3) and the red light (4) come on, the audible warning
sounds (if fitted), and the refrigeration motor starts up.
2. Additionally operate the fast-freeze switch (1).
The yellow pilot light (2) comes on, the audible warning switches off,
and the freezer motor runs continuously.
3. Only when the red light (3) has gone out should you reset the fast-
freeze switch (1). The yellow light (2) goes out and the audible warning
mode is activated again.
The temperature regulator (6) can be used to set the required storage
temperature, -18°C or colder.
Important! Wait until the freezer compartment has reached a temper-
ature of –18°C, or the red warning light has gone out, before storing
frozen food.
Important: Regularly check on the red temperature pilot light (3) and
the thermometer that the required storage temperature is being main-
tained.
☞

14
Freezing and storing frozen food
You can use your freezer for freezing fresh food yourself.
Important!
• The temperature in the freezer compartment must be –18°C or col-
der before freezing food.
• Please observe the freezing capacity given on the rating plate. The
freezing capacity is the maximum quantity of fresh food that can be
frozen within a period of 24 hours. If you wish to freeze food several
days in a row, please observe a maximum capacity of only 2/3 to 3/4
of that on the rating plate. The quality of the food is best preserved
when it is frozen right through to the core as quickly as possible.
• Allow warm food to cool down before freezing. The warmth will
cause increased ice formation and increase the power consumption.
• Please note the maximum storage times specified by the manufactu-
rer.
• Thawed foods which have not been processed further (cooked into
meals) may not under any circumstances be frozen a second time.
☞1. Press the fast freeze button for the freezing of fresh food. The yellow
light illuminates.
To utilise the maximum rated freezing capacity, switch on the fast
freeze switch 24 hours before freezing is due to start (the yellow light
illuminates). For smaller amounts the fast freeze switch should be
switched on 4 - 6 hours in advance.
Switching off the appliance
To switch off the appliance, turn the thermostat control knob to posi-
tion „•“ and press the ON/OFF switch.
If the appliance is not going to be used for an extended period:
☞1. Remove all deep-frozen packages as well as ice-trays.
2. Switch off the appliance by turning the temperature regulator to posi-
tion „•“ or pressing the ON/OFF switch.
3. Remove the mains plug or switch off or disconnect from the electricity
supply.
4. Defrost freezer and clean thoroughly (see sections: “Defrosting” and
“Cleaning and Care”).
5. Leave the door open to avoid the build up of odours.
☞

15
2. All foods must be packed air tight prior to freezing, so that they do
not dry out or lose their flavour, and so that no flavour contamination
of other frozen goods occurs.
Caution! Do not touch frozen food with wet hands. Your hands could
stick to the food and cause skin abrasions.
3. Place the packed food in the drawers. Place food to be frozen in the
appliance´s two top drawers (1) and (2). Unfrozen food must not touch
items already frozen, otherwise the frozen food could begin to defrost.
Freezer drawers (4) and (5) should only be used for storage of frozen
food.
Place frozen food in the drawers sorted by type, as far as possible.
4. Once the food has frozen, press the fast freeze button again. The yel-
low light goes out.
Tips:
• The following are suited for the packaging of frozen goods:
– freezer bags and polyethylene wraps;
– special containers for frozen goods;
– extra–thick aluminium foil.
• The following are suitable for sealing bags and wrap: plastic clips,
rubber bands or tape.
• Smooth the air out of the bag before sealing; air makes it easier for
the frozen food to dry out.
• Make flat packages, because these freeze more quickly.
• Do not fill containers for frozen goods to the brim with liquid or
paste–like goods, because liquids expand during freezing.
Storage Goods Symbols/Freezing Calendar
• The symbols on the drawers show
different types of frozen goods.
• The numbers indicate storage times
in months for the appropriate types
of frozen goods. Whether the upper or lower value of the indicated
storage time is valid depends on the quality of the foods and pre-
treating before freezing. The lower value applies to foods with high
fat content.

16
Defrosting
During use and when the door is opened, moisture is deposited as frost
inside the appliance, particularly on the evaporator melts. This frost
must be removed from time to time using the soft plastic scraper sup-
plied. Under no circumstances use hard or pointed objects for this pur-
pose.
The freezer should always be defrosted when the layer of frost has
reached a thickness of approx. 4 millimetres. Defrost should be carried
out once a year regardless of the amount of frost that has built up. A
good time for defrosting is when the appliance is empty or contains
only little food.
Each temperature rise reduces the keeping qualities of your frozen
food. Around 12 hours before defrosting your freezer, switch over to
freeze to build up a low temperature reserve in the frozen food.
Warning!
• Do not use electrical heating appliances or any other mechanical or
artificial devices to speed up the defrosting process.
• Do not use defrosting sprays, they can be hazardous to your health
and/or contain substances that damage plastics.
Caution! Do not touch frozen food with wet hands. Your hands could
stick to the food and can cause skin abrasions.
☞1. Remove frozen food, wrap it in several layers of newspaper and store
it, covered, in a cool place.
2. Switch off the appliance and unplug it, or pull the fuse or switch off
the circuit breaker.
3. Remove all drawers except the bottom one. The bottom drawer serves
as a practical container to collect the water from the thawing ice.
☞
Preparation of Ice Cubes
☞1. Fill the ice cube tray 3/4 full with cold water, place it in the freezer
compartment and leave to freeze.
2. To loosen the frozen cubes, either bend the ice cube tray or hold it
under running water for a few seconds.
Important! Never try to free an ice tray that is frozen to the freezer
compartment using pointed or sharp edged objects. Use the ice scraper
supplied.

17
Tip: To speed up the defrosting process, place a pan with warm water
in the appliance and close the door. Remove pieces of ice that have
fallen before they completely defrost.
4. Remove the bottom drawer and dry the interior of the bottom com-
partment thoroughly.
5. After defrosting, thoroughly clean the freezer compartment and interi-
or fittings ( see "Cleaning and Care" section).
6. Switch on the appliance or reconnect to the electricity supply.
Cleaning and Care
For hygienic reasons the appliance interior, including interior acces-
sories, should be cleaned regularly.
Warning!
• The appliance must not be connected to the mains during cleaning.
Danger of electrical shock! Before cleaning switch the appliance off
and remove the plug from the mains, or switch off or turn out the
circuit breaker or fuse.
• Never clean the appliance with a steam cleaner. Moisture could
accumulate in electrical components and there is a danger of an
electric shock. Hot vapours can lead to the damage of plastic parts.
• The appliance must be dry before it is placed back into service.
Important!
• Ethereal oils and organic solvents can attack plastic parts, e.g.
– lemon juice or the juice from orange peel;
– butyric acid;
– cleansers which contain acetic acid.
Do not allow such substances to come into contact with appliance
parts.
• Do not use any abrasive cleansers.
☞1. Remove frozen food and wrap it in several layers of newspaper. Store it
in a cool place, well covered.
2. Defrost the appliance prior to cleaning (see “Defrosting” section).
3. Switch off the appliance and unplug it.
4. Clean the appliance and the interior accessories with a cloth and luke-
warm water. Commercially available dish washing detergents may also
be used.
5. After cleaning wipe with fresh water and rub dry.

18
6. After everything is dry, switch to fast freeze. After running the appli-
ance for two or three hours, it is ready again for storing frozen food.
An accumulation of dust will affect the performance of the appliance
and cause excessive electricity consumption. The structure of the appli-
ance permits you to clean the rear zone close to the wall, using a vac-
uum cleaner.
1. Remove the plinth (1), then the venti-
lation grid (2);
2. Carefully pull the air deflector out (3).
321
Energy Saving Tips
• Do not install the appliance near boilers, radiators or other sources
of heat. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Do not leave the door open any longer than necessary.
• Do not set temperature any colder than necessary.
• Check the storage temperature in the freezer on the thermometer.
• Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
Magnetic door seal
After opening and closing the door of your freezer you will not be able
to open the door again immediately. This is because a vacuum will
have developed inside, keeping the door closed until the pressures
inside and outside the door have equalised. After a few minutes you
can easily reopen the door.

19
What to do if ...
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can recti-
fy yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
Important! Repairs to refrigerators/freezers may only be performed by
competent service engineers. Improper repairs can give rise to signifi-
cant hazards for the user. If your appliance needs repairing, please
contact your specialist dealer or our local Customer Service.
If the freezer system has stopped working and the freezer is full, the
reserve in the cold accumulator and in the deep frozen food itself will
give the food a hold over time of about 29 hours. If the freezer is
without a cold accumulator the hold over time will be reduced to
about 20 hours.
Symptoms
Appliance does not work,
no pilot light is
illuminated.
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is
defective
Socket is defective.
Mains malfunctions are to
be corrected by an
electrician.
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Green light does not light
up, yellow light lights up
when the fast freeze func-
tion is activated.
Green light faulty.
Please inform your local
Customer Care Service
Centre.
Yellow light does not light
up, when the fast freeze
function is activated,
appliance is on.
Yellow light faulty.
Please inform your local
Customer Care Service
Centre.
The compressor runs con-
tinuously
Temperature is set too
cold.
Turn the thermostat con-
trol knob to a warmer set-
ting temporarily.

20
What to do if ...
Important: regularly check on the red temperature pilot light and
thermometer to establish that the storage temperature is being main-
tained.
Symptoms Possible Cause Remedy
The freezer temperature is
not sufficient, red light
illuminates, temperature
alarm signal sounds.
Temperature is not proper-
ly adjusted.
A large quantity of warm
food placed in the appli-
ance within the last 24
hours.
Please look in the “Initial
Start Up” section.
Press the fast freeze
switch.
Do not leave the door
open any longer than nec-
essary. Press the fast freeze
switch.
Door was open for an
extended period.
The appliance is near a
heat source.
Please look in the
“Installation Location”
section.
Heavy build up of frost,
possibly also on the door
seal.
Door seal is not airtight
(possibly after reversing
the door).
Carefully warm the leaking
sections of the door seal
with a hair dryer (on a
cool setting). At the same
time shape the warmed
door seal by hand such
that it sits correctly.
Unusual noises.
Appliance is not level.
A component, e.g. a pipe,
on the rear of the appliance
is touching another part of
the appliance or the wall.
Readjust the feet.
If necessary, carefully bend
the component out of the
way.
The compressor does not
start immediately after
changing the temperature
setting.
This normal, no error has
occurred.
The compressor starts after
a period of time.