AEI Security & Communications DigiSender IR Systeme Technik DG4MEIR User manual
MORE EXAMPLES OVERLEAF...
IMPORTANT
IR Systeme Technik™
INSTALLATION GUIDE
PLEASE REFER TO THIS INSTRUCTION SHEET PRIOR TO INSTALLATION
The IR Systeme Technik™ is designed to emit remote control signals effectively at the source devices connected to your DigiSender® product.
This could be your Satellite or Cable receiver, VCR, DVD etc. When installed correctly, this device will enable you to control your equip-
ment from your bedroom or other remote location.
Because everyone has their equipment set up differently, the Magic Eye comes included with a number of accessories. These enable the IR
Systeme Technik™ to be installed in many different ways. Please choose the most appropriate installation for your equipment setup.
IMPORTANT: THE MAGIC EYE CABLE MUST BE CONNECTED TO THE ‘IR’ SOCKET ON YOUR DIGISENDER® TRANSMITTER.
Please refer to your DigiSender® manual for further information.
EXAMPLE #1
Stacked equipment under TV stand
EXAMPLE #2
Equipment stacked in a glass cabinet
IR Systeme Technik™
Magic Eye System &
Accessories
Using the accessories
Accessory #1
Extension base
Accessory #2
Round base
Magic Eye
Infrared emitter
Vertical
Mounting #2
Vertical
Mounting #1
The Magic Eye can be affixed to the underside of the TV stand using the
supplied stickyfoam pad.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
The Magic Eye can be affixed directly to the inside of the glass door. When
closed the eye will be facing the source equipment.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
Vertically mount the eyeusing the accessory #1
ensuring the infra red LED faces the infra red
sensor on your equipment.
Affix to inside of
cabinet door using
the supplied sticky
foam pad.
150807-1
EXAMPLE #3
Single item on a shelf
EXAMPLE #5
Single item in cabinet or on a shelf (1)
EXAMPLE #6
Single item in cabinet or on a shelf (2)
EXAMPLE #4
Multiple items on a shelf
Use accessory #1to place the Magic Eye at a short distance from the front of
the Satellite or Cable receiver you intend controlling. Mount the Magic Eye in a
vertical configuration.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
Use accessory #1 with the Magic Eye in a horizontal position so IR signals are
spread across both devices you intend controlling.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
The Magic Eyecan be affixed to the base of the TV stand or cabinet using the
supplied sticky foam pad. Place the eyein a horizontal position to ensure
maximum spread of the IR signals.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
Accessory #2 can be used to mount the Magic Eyein a vertical position when
used to control a single device.
Please ensure that the glass eye faces the equipment you wish to control, for
example, your Satellite or Cable receiver.
Horizontally mount the eye using the
supplied sticky foam pad and
accessory #1 to further the distance
between eye and equipment.
Use the supplied foam pad
to fix the eyein position.
Accessory #2 can be used to
hold the eye in position.
TECHNICAL SUPPORT
Telephone 0845 1667940
or Email advice@digisender.net
We are open Monday to Friday, 9AM-1PM & 1.30 PM-5PM
Calls charged atlocal rate. Mobile rates may differ.
©2006 AEI Security & Communications Ltd. All rights reserved.
Vertically mount the eye using accessory
#1 ensuring the infra red LED faces the
infra red sensor on your equipment.
Table of contents
