Fujitsu Inverter Halcyon ASU12RMLQ User manual

Model shown on this installation is
ASU12RMLQ.
Other models may be slightly
different.

Remove screws holding the front
cabinet (3 or 4)
Unlatch the front cover on each side and remove the
front cover
Remove Air & Plasma
Filter
Remove front cabinet by snapping it out from the
top

Unplug all Plug In wires
Remove all three screws holding the Controller
box in place.

Slide out the controller box
Plug in hard wire remote to
terminal & re-assemble the
unit.

Remote control
Cord Terminal cord
Insulated
Connection
Remote control Cord
Part# 9372714010
Terminal cord
Part# 9705932012
Remoter control cord and terminal cord

Remove the two screws &
remove and the back cover
Connect wire to terminal and close remote