aeolus M3 1201 User manual
STEP by STEP
INSTALLATION
GUIDE
aeolus
1201
Case & Radiator Fan
M3
Package Contents
Package Contents
Ax1
Bx 4
01 Turn off the computer before installing
02
b
a
aa
03 Two methods to control build-in RGB Lighting
Method 1. Use included button
A
If the motherboard RGB sync
function is used, the button func-
tion will be automatically disabled.
Manual is for reference only. Actual product may vary.
04 Two methods to control build-in RGB Lighting
Method 2. If your case has “RESET SW”, you can use
case button to change lighting modes
2
1
REMOVE
RESET LED
or
A
A
RESET SW
RESET SW
Manual is for reference only. Actual product may vary.
If the motherboard RGB sync
function is used, the button func-
tion will be automatically disabled.
05 If your motherboard has 5V 3-Pin addressable (digital)
RGB header, you can customize RGB lighting via mother-
board manufacture sync software
press and hold the button for 3 seconds
after turn on the computer
A
+5V D
ADD_HEADER
+5V D - G
JRAINBOW ADDR_LED v d g
5v d gnd
5V_LED
AEOLUS M3-1201 only support 5V addressable (digital) RGB header
Manual is for reference only. Actual product may vary.
06
Manual is for reference only. Actual product may vary.
A
The design of male and female motherboard sync
connectors to deal with insufficient 5V socket
Only support 5V addressable (digital) LED
07
Manual is for reference only. Actual product may vary.
PWM
A
Only support 5V addressable (digital) LED
