Smartmi Standing fan 3 User manual

Ventilador de pie 3 Smartmi – Manual de Usuario

Smartmi Standing Fan 3 Instruction Manual

Manual de instruções do ventilador de pé Smartmi 3

www.mismartmi.es

www.mismartmi.pt

Please do not operate the product on an uneven or

unsteady surface where it may topple over.

Please do not operate the product near other objects

which may topple over.

Please do not operate the product in a hot and humid

environment, such as a bathroom.

Please discontinue your use of the product if the power

cord is damaged or the power plug is loose.

Please do not operate the product if the fan grille is not

properly installed or the rear fan grille is loose/missing.

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction

concerning use of the appliance in a safe way and

understand the hazards involved.

Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children

without supervision.

Please do not take the product apart on your own.

Please do not fold, bend, or twist the power cord

with excessive force to prevent exposed or broken

wires.

Please do not insert your finger or foreign objects

into the front fan grille, rear fan grille, or the fan

blades while the fan is in operation.

Please keep your hair or fabrics away from the fan

to prevent objects from becoming entangled in the

fan blades.

Please do not plug the product into an inappropriate

AC power socket.

Please do not use the supplied power cord with any

other product.

This appliance contains batteries that are only

replaceable by skilled persons.

The remote controller is powered by 1 LRAAA battery,

insert 1 LRAAA battery with the correct polarity in the

battery compartment. The supply terminals are not to

be short-circuited.

Non-rechargeable battery used for remote contoller is

not to be recharged. Exhausted batteries are to be

removed from the appliance and safely disposed of.

If the remote controller is to be stored unused for a

long period, the battery in the remote controller should

be removed.

Warning

Read this manual carefully before use, and retain it for future

reference

Improper product use may lead to electrical

shocks, accidental fire, personal injuries, and other

damages.

Package list

Motor + column

Base

Fan blade knob

Base bolt Screw for fan cover

Allen wrench

Power cord

Remote control/AAA battery

Fan assembly

Fan cover knob

Installation

Safety instructions

Precautions

Handling

Always turn the fan off and unplug it before moving it.

Hold the fan column firmly to prevent falling and personal injuries.

Disconnect the AC power cord from AC power outlet prior to maintaining or

moving the fan.

When disconnecting the AC power cord, do not pull or drag it.

If the plug or insulation of the power cord is damaged, it must be replaced with

either a dedicated power cord or one purchased from the maintenance

department of the manufacturer.

In use

If you encounter any of the following: abnormal sound, strange odor,

high temperature, inconsistent fan rotation, etc., stop the fan

immediately.

Do not lean on the fan or tilt the fan while it is running.

Do not dismantle the device by yourself. In case repair or consultation is

needed, please contact Smartmi customer service.

Power cord

Be sure to properly install the product according to the instructions to

avoid electric shocks, fire hazards, personal injuries, and any other

accidents.

When installing and dismantling the device, be sure to first disconnect the AC

power.This fan contains a battery. When assembling the unit, mount the

fan cover and fan blades first, and then assemble the base to prevent the

fan from starting accidentally and causing mechanical hazards.

Column

Display

Base Power port

Oscillation

control

button Power/wind speed

Product overview

adjustment button

Home position

Home position for fan oscillation. If

the fan is turned off while oscillation

is on, the wind speed will be reduced

and the fan cover will slowly rotate

back to home position.If the fan's

power supply is cut off, the fan

cover will not return to home

position and will remain in it's

current position at the time.

Base bolt

Wind speed indicator

Power/wind speed adjustment

button

Press to switch on.While the fan is activated,

press to switch wind speed levels.The wind

speed will switch between level 1, 2, 3, and 4

with each button press. Press and hold for 2

seconds to turn off the fan.

Oscillation control/mode change

While fan is running, press to control fan

oscillation. Press and hold for 2 seconds to

switch to the natural breeze mode. Press and

hold for 2 seconds again to turn off the mode.

Note: Press "Power/wind speed adjustment"

button and "Oscillation control/mode

change" button simultaneously for about 5

seconds

to pair the remote control with the

fan via Bluetooth.

Fan assembly

11 12 13

Fan grille Fan blades Rear fan cover

Fig. and remove f2 an blades.

Installation

Dismantling the fan assembly

Take out the fan assembly. Rotate the fan grille counterclockwise until it is

loose, as shown in Fig. belo1 w. Remove the fan grille as per the directions in

Installing the rear fan cover

Place the rear fan cover on the motor aligned at the top position.Tighten

5 fan cover knob clockwise to attach the rear fan cover to motor.

Installing the fan blades

Align the center hole of fan blades with the motor shaft and push into position.

Tighten 4 the blade knob counterclockwise to attach fan blades to motor that

has the rear fan cover installed.

Installing the fan grille

Place the fan grille into the frame of the rear fan cover, then rotate the fan

grille clockwise to align with the engraved markings on the rear cover.

Unfasten Fasten

Installing the base

Fastening the fan grille

Insert the scr8 ew for fan cover

into the hole at the bottom of the

fan cover, then fasten it clockwise

with a Phillips head screwdriver. Align the 1 motor and column with

the 3 base socket in the direction

shown above, then insert the lower

end of column into base socket.

Insert the b7 ase bolt into

the hole at the bottom of

the base.

Tighten the b6 ase

bolt clockwise with the

Allen wrench to secure

column to base.

Power port

Installation

Connecting to power supply/charging the battery

Plug one end of the power cord into the power port on the back of the base

and the other end into a power supply to connect the power supply and

charge the battery.

There is a battery contained inside the fan base. When it is sufficiently

charged, the power cord can be unplugged and the device can be used

independently.

If the battery is installed and the fan is connected to a power supply, no

battery power will be consumed while it is running, and the battery will be

charged to full capacity.

Charging

While charging, the battery level indicator will flash green. When battery level

reaches 100%, the green light will remain steady on.

Connect with Mi Home / Xiaomi Home App

This product works with Mi Home / Xiaomi Home app*.

Control your device with Mi Home / Xiaomi Home app.

Scan the QR code to download and

install the app. You will be directed to

the connection setup page if the app is

installed already. Or search "Mi Home

/ Xiaomi Home" in the app Store to

download and install it.

* The app is referred to as Xiaomi Home

app in Europe (except for Russia). The

name of the app displayed on your device

should be taken as the default.

Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then

follow prompts to add your device.

Note: The version of the app might have been updated, please follow the

instructions based on the current app version.

Indicator status Battery level

Green 51%-100%

Yellow 21%-50%

Red 11%-20%

Red (flashing) 0%-10%

Use

1. Press and hold the and buttons simultaneously for 5 seconds. The 4 wind

speed indicators will begin to flash simultaneously, and will go out once pairing is successful.

2. When a pairing request is received by the fan, the 4 LEDs on the fan body will begin to flash.

At this point, press any button on the fan to pair. A beep indicates that pairing has been

successful.

3. If no button is pressed on the fan within 30 seconds, pairing will discontinue and the

remote control will stop flashing.

Press and hold the button for 2 seconds to stop the fan.

Features

Screen display

Pairing remote control via Bluetooth

Turning on or off/Adjusting wind speeds

Power on

Press the button to start the fan.When it is turned on for the first time, the

wind speed will be set at Level 1.When it is turned on again after being turned

off, the wind speed will default to the level set when last powered on.

Power off

Press the button to set fan oscillation.When the fan is turned off, it will

automatically return to the home position.

Setting oscillation

Wind

speed

Power

off Level 1 Level 2 Level 3 Level 4

Status

indicators

Indicator offIndicator on

Natural breeze status indicator

The natural breeze function can be enabled or disabled via the app

or remote control.

Wi-Fi status indicator

Ionizer status indicator

The ionizer function can be enabled/disabled via the app. When the

fan is turned on for the first time, the function will be enabled by

default.

Wind speed status indicators

The wind speed can be switched between level 1, 2, 3, and 4. The

corresponding status indicators will illuminate accordingly (refer to

the table below).

for 5 seconds. A beep indicates that Wi-Fi has been successfully reset.

Use

Resetting Wi-Fi

If the fan cannot connect to the phone, press and simultaneously

Wi-Fi status indicator

Pitch

To adjust the fan's pitch,

gently lift or press the

motor or fan cover.

Additional functions

The natural breeze mode and ionizer function can be enabled via the app.

More functions such as "Oscillation angle setting" and "On/off timer" can be

used on the app.

Troubleshooting

Connected

Not connected Blinking

Solid

Issue Cause Solution

Fan does not

run

No power is supplied to

power outlet Use an outlet that has power

Power cord is not connected

properly Connect power cord correctly

Fan column and base are

not installed properly

Align fan column with the

socket on the base, and fasten

connecting screws

Wi-Fi cannot

be connected

Router is on 5G channel Connect router via 2.4G channel

Mobile app is using up too

much memory

Shut down the app completely

and restart

Fan has been unable to

connect to network for more

than half an hour

Reset Wi-Fi (please refer to

"Resetting Wi-Fi")

Fan blades

stop, fan

beeps three

times, and four

indicators flash

Foreign object stuck in fan

blades

Power off the fan and remove

the foreign object

Motor failure Contact post-sales service

25°up

15°down

Parts that cannot be cleaned

Gently wipe the following parts with a soft, dry cloth.

Fan cover knob

Fan grille

Fan blades

Rear fan cover

Do not flush the above parts with water.

Do not use thinner, lightweight gasoline, detergent or alkaline-based cleaners.

Base

Fan blade knob

Maintenance and care

Fan cleaning

Parts that can be cleaned

The following parts can be cleaned with clean water or diluted neutral

detergent using a soft cloth or sponge.

Be sure to stop the fan and power it off before disassembly. Before dismantling Fan Cover,

remove the metal column from base to prevent the fan from starting accidentally and

causing mechanical hazards.After cleaning, ensure all parts are completely dry before re-

installation and use, and avoid direct sunlight.

Specifications

Name Smartmi Standing Fan 3 Rated voltage 100-240V Power cord 1.5m

Model ZLBPLDS05ZM Rated frequency 50/60Hz Battery type Lithium-ion battery pack

Type DC standing fan Rated power 25W Rated capacity of

battery 2800mAh（33.6Wh）

Gross weight Approx.5.3kg Item dimensions 340mm×330mm×960mm Noise ≤60dB(A)

Net weight Approx.3.5kg Wireless

connection Wi-Fi IEEE 802.11 b/g/n 2.4GHz

Hereby, Beijing Smartmi Electronic Technology Co., Ltd. declares that the radio equipment type ZLBPLDS05ZM are in compliance with Directive 2014/53/EU. The full

text of the EU declaration of conformity is available at the following internet address: https://smartmi.com.cn/doc.html

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household

waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste

electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to

the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such

collection points.

RF Specification:

Wi-Fi 2.4G (2400 - 2483.5 MHz), Max. RF Output Power: <20 dBm

Under normal use of condition ,this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

Regulatory Compliance Information

Europe — EU declaration of conformity

Motor + column