Aerus Beyond LAUNDRY PRO 2.0 User manual

COLD WATER LAUNDRY SYSTEM
READ MANUAL CAREFULLY FOR
PROPER USE AND OPTIMAL OPERATION.

2
GENERAL INFORMATION
PRODUCT OVERVIEW
Laundry Pro 2.0 is designed to work in conjunction with your washing machine, using cold water and our proprietary ActivePure®Technology to clean clothes.
As your washer begins to fill, Laundry Pro 2.0 will turn on. Laundry Pro 2.0 is equipped with an internal leak sensor.
Laundry Pro 2.0 incorporates the power of our exclusive ActivePure®Technology with the cleaning action of water with hydrogen & oxygen-based molecules
to lift dirt and grime away from the fibers of fabric and prevent the growth of odor-causing bacteria. Laundry Pro 2.0 is an amazingly eective cold water
laundry system for residential use.
Laundry Pro 2.0 is intended to work with residential clothes washers and is for use by anyone interested in an economical alternative to the typical detergents
and chemicals currently available.
Laundry Pro 2.0 uses a variation of the technology originally developed for use in the International Space Station and is recognized as a Certified Space
Technology by the Space Foundation.
CONTENTS
Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Storage and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Removing Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation of Wall Anchors or Screws. . . . . . . . . . . . . . . . . . . .6
Reinstall the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hose Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting the Power Adapter . . . . . . . . . . . . . . . . . . . . . . . 8
System Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Replacing the ActivePure Cell Assembly . . . . . . . . . . . . . . . . . 10
Before Washing Clothes . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Using Your Laundry Pro 2.0. . . . . . . . . . . . . . . . . . . . . . . . . .11
For Washers That Require Hot & Cold Water Input. . . . . . . . . . . . 12
Temperature Controlling Water Valves . . . . . . . . . . . . . . . . . . 13
External Water Tap (Available Separately) . . . . . . . . . . . . . . . . 13
Status Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . 14
Installation Problems? . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Replacement Parts & Service . . . . . . . . . . . . . . . . . . . . . . . 17
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FCC Declaration & Responsible Party . . . . . . . . . . . . . . . . . . . 19
We reserve the right to change or modify any specification
without notice.
SPECIFICATIONS
Laundry Pro 2.0
• Model Number: W1017H
• Sales Number: 00695
Technology:
• ActivePure®Technology
Electrical:
• Power Usage: 0.4W AC (standby) 1.3W AC (operating)
• Power Adaptor Input: 100-240V ~50/60 Hz 0.45A
• Power Adaptor Output: DC out; 12V 2.5A
Water:
• Pressure: Min. 20 psi to 60 psi Max./1.37~4.13 bar
• Temperature: use cold water only
Operating:
• Temperature: 50˚F - 100˚F (10˚C - 37.8˚C)
• Humidity: 40% - 85%
Weight & Dimensions:
• 4.3 lbs (1.95 kg)
• 5.19” H x 17.3” W x 3.69” D
(13.48 cm x 43.94 cm x 9.37 cm)
Warranty:
• Limited three (3) year warranty
FILL IN AND SAVE
Record information regarding your new Laundry Pro 2.0 here. Retain for
future reference.
Model No.
Serial No.
Date of Purchase
Aerus Independent Distributor:
Name
Phone No.
Address
STORAGE AND DISPOSAL
Do not dispose of this product as household waste. Electrical
waste and electronic products should be appropriately recycled
as required by practices established by your local authority.

3
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read this manual in its entirety prior to installing or using your Laundry Pro 2.0.
Keep out of the reach of children.
• For indoor use only
• Water pressure MUST be checked and within stated specs before installation
• If water pressure is greater than 60 psi, Water Pressure Reducer MUST be used (sold separately)
• DO NOT operate unit with cover removed
• Disconnect all power before servicing
• DO NOT use an extension cord or other adapter with this appliance
• This appliance is not recommended for use with high sediment content water; if your water has a high sediment content, consult a water filtration expert for
available options
• Maximum dynamic water inlet pressure is 60 psi
• Use the new hose included with the unit, when connecting the Laundry Pro 2.0 to your washing machine; you should also replace any washing machine hose
that is more than 3 years old
• DO NOT clean the cover of your Laundry Pro 2.0 with harsh chemicals, abrasives, or cleansers; to clean, use a soft cloth dampened with water
• Laundry Pro 2.0 is designed for normal residential use only; use in a commercial or non-residential setting may damage the unit and will void your warranty
WARNING
• To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring must be done in accordance with the
National Electrical Code ANSI/FNPA, No. 70 - Latest Revision and local codes and ordinances in the USA; for Electrical
Codes outside the USA, consult your local regulatory agency for the latest codes and ordinances; it is the personal
responsibility and obligation of the appliance owner to provide adequate electrical service for this appliance
• Electrical shock hazard; you can be killed or seriously injured if you don’t follow instructions
CAUTION
• We strongly recommend that a licensed plumber installs the Laundry Pro 2.0
• Water pressure MUST be checked and within stated specs before installation
• If water pressure is greater than 60 psi, Water Pressure Reducer MUST be used (sold separately)
• Water treated by your Laundry Pro 2.0 unit is intended for clothes washing only and is NOT approved for any internal
consumption such as drinking, bathing, brushing teeth, etc; DO NOT drink, ingest, or internally consume the water from your
Laundry Pro 2.0 unit or washing machine; DO NOT provide water from your Laundry Pro 2.0 to your pets or other animals
• Damage to your appliance or the surrounding area can occur if you don’t fully
follow instructions
NOTE: Your Laundry Pro 2.0 Unit was factory tested. It is normal for some residual water to still remain in the unit as a result of these tests.

4
ELECTRICAL REQUIREMENTS
100 - 240 Volt 50/60 Hz 5 AMP (minimum) Fuse or Circuit Breaker. Laundry Pro 2.0 is equipped with an AC to DC power supply.
WATER REQUIREMENTS
A dynamic water pressure greater than 20 psi / 1.37 bar and less than 60 psi / 4.13 bar is required to correctly operate your Laundry Pro 2.0.
LOCATION CONSIDERATIONS
The Laundry Pro 2.0 must never be installed in areas where water may freeze since the unit will always maintain some water in the unit, the water valve,
and hose areas. This can cause damage to internal components. It is also recommended to avoid installation in areas of high humidity, as it can eect the
operation of the unit.
WATER
OUTLET
WATER
INLET
17.3” (43.94 cm)
5.19” (13.48 cm)
3.69” (9.37 cvm)
INSTALLATION REQUIREMENTS
WARNING
Never use an extension cord.
CAUTION
• We strongly recommend that a licensed plumber installs the Laundry Pro 2.0
• Water pressure MUST be checked and within stated specs before installation
• If water pressure is greater than 60 psi, Water Pressure Reducer MUST be used (sold separately)
• Incoming water pressure must be greater than 20 psi / 1.37 bar; if your household water
pressure is greater than 60 psi / 4.13 bar, you must install an in-line pressure reducer before
installing Laundry Pro 2.0; failure to follow these instructions may result in water leakage,
property damage, personal injury, and may void your warranty. Water pressure of 20 psi /
1.37 bar to 60 psi / 4.13 bar is required to correctly operate your Laundry Pro 2.0; low water
pressure may prevent your unit from operating properly and/or cause a failure in your washing
machine’s water valve
• The washer’s water valve may also not shut o completely; check the documentation supplied with your washing
machine for exact specifications; your washing machine and cold water faucet must be within
4 feet of the right side of the unit to use the inlet hose provided with your Laundry Pro 2.0
• TO AVOID THE POSSIBILITY OF WATER DAMAGE, SHOULD A HOSE LEAK, ALWAYS HAVE FAUCETS ACCESSIBLE AND
TURN OFF FAUCETS WHEN WASHER IS NOT IN USE; DO NOT USE WITH A CARBON FILTER

5
• Remove your new Laundry Pro 2.0 from its packaging
• Inspect the unit for any signs of shipping damage
Screws
1. Remove the two (2) cover screws located on the bottom of the unit.
2. Remove the two (2) screws (not shown) along the top of the Laundry Pro 2.0.
3. To remove the cover, pull the top away from the unit, then lift o the cover.
BEFORE YOU START
REMOVING COVER
CAUTION
Your Laundry Pro 2.0 unit was factory tested. It is normal for some residual water to still remain in the unit as a result of
these tests.

6
A. If using supplied wall anchors, drill two 3/16” (4.76 mm) diameter holes.
Place two wall anchors into the wall. Install two supplied screws and
tighten until almost all the way in.
B. If mounting to wall studs, drill two 3/32” (2.381 mm) diameter holes
approximately 1” (25.4 mm) deep. Install two supplied screws and tighten
until almost all the way in.
NOTE: Washing machine and cold water faucet must be
within 4 feet (1.21 m) of the right side of unit.
1. Place the Laundry Pro 2.0 to the wall and mark the appropriate keyholes
with a pencil.
2. Position the keyholes of the Laundry Pro 2.0 onto the screws (not shown).
Finish tightening screws enough to securely mount unit, but still allowing it
to be removed from wall. Remove unit from wall.
NOTE: The provided hardware kit contains adhesive backed rubber spacers
to be placed on back of unit to provide additional clearance from wall
if needed for hose installation or the use of ActiveClean Port. (Page 12)
17.3” (43.94 cm)
Keyholes
Screws (not shown)
INSTALLATION OF WALL ANCHORS OR SCREWS

7
NOTE: Remove the two black caps from the hose connections before installing hoses.
1. Turn the cold water o by shutting o the cold water faucet.
NOTE: To help prevent water spray when disconnecting hoses, you can relieve
pressure in the water line by momentarily starting your washing machine.
2. Remove the cold water hose from the cold water inlet on the back of your washing
machine. Leave hot water hose attached.
1. Return the Laundry Pro 2.0 cover to its original position, fitting the bottom in place
and tipping upward.
2. Secure with two (2) screws (not shown) along the top edge.
3. Put the two (2) remaining screws along the bottom edge and tighten.
Screws
Screws
REINSTALL THE COVER
CAUTION
• When connecting hoses to your Laundry Pro 2.0 start by hand tightening the hose connector(s); using adjustable pliers,
finish tightening hose connector(s); DO NOT remove or disconnect the hot water line from your washing machine or
water valve
• To ease hose installation and prevent cross threading, connect hose prior to mounting unit on wall
HOSE INSTALLATION

8
3. Connect the hose from the cold water inlet on your washing machine to the INLET connection on your
Laundry Pro 2.0.
4. Connect the new hose provided with your Laundry Pro 2.0 to the water OUTLET connector on your
Laundry Pro 2.0 unit.
5. Finally, connect the new hose to the cold water inlet on your washing machine.
HOSE INSTALLATION (CONTINUED)
1. Insert the provided power cord into the POWER IN socket located on the side of the unit.
NOTE:Do not plug the adapter into the wall socket until installation is complete. See page 9.
CONNECTING POWER ADAPTER
WARNING
DO NOT use any AC/DC adapter other than the one supplied with your Laundry Pro 2.0 or Aerus replacement AC/DC
adapter. Failure to follow these instructions may void your warranty and/or result in damage to your unit, fire,
or electrical shock.
CAUTION
• If your existing hose is more than 3 years old, we recommend that you replace it with the optional stainless steel hose
• To ease hose installation and prevent cross threading, connect hoses prior to mounting unit on wall

9
SYSTEM SET UP
4. Start your washer. The status light should illuminate blue after a few seconds.
NOTE: Your Laundry Pro 2.0 will automatically turn on and o as your washing machine starts,
and stops.
1. Plug power cord into the wall outlet of your home’s electrical power system.
See page 4 for electrical requirements.
Status Indicator Lights
2. Turn on the cold water valve.
3. Check all hoses to ensure no water is leaking. Tighten if necessary.
WARNING
• Electrical Shock Hazard; when working with electrical connections, the appliance and surrounding area should be clean
and dry of any standing water; failure to follow these instructions can result in death, fire, or electrical shock
• Electrical Shock Hazard; DO NOT use an extension cord. Failure to follow these instructions can result in death, fire,
or electrical shock

10
1. Unplug from power source and remove mounted
unit from wall.
2. Remove cover (See Page 5).
3. Unplug photo sensor lead (Figure 1).
4. Remove tubing from cell (Figure 2).
5. Unplug wiring harness from bulb (Figure 3).
6. Remove two screws to remove cell (Figure 4).
7. Replace with new cell and remount to base.
8. Plug wiring harness back onto bulb.
9. Fit tubing back onto cell.
10. Re-plug photosensor lead.
11. Replace cover (See page 7).
Cell Tube
Figure 2
Photo Sensor Lead
Figure 1
Wiring Harness
Figure 3
Screws
REPLACING THE ACTIVEPURE CELL ASSEMBLY
CAUTION
The ActivePure Cell Assembly requires replacement at approx. 9,000 hours of use or once every 12 months to maintain
the Limited 3 year warranty. The LED will flash periodically (visual chirp) to notify that cell replacement is required. The
UV bulb will NOT be turned on again until the cell has been replaced.

11
IF YOUR WASHING MACHINE IS NOT NEW you will need to perform this procedure to help remove any detergent buildup that may contaminate your clothing.
1. Do not put clothes in the washer at this time. Set your machine to its largest load setting, cold water only.
2. Start the washer and let it run through every cycle.
3. Once it has finished, repeat Steps 1 and 2 three more times. Depending on the age and severity of detergent buildup, it may be necessary to perform Step
3 several times.
NOTE: If you have a front loading washer, odors can develop due to stagnant water left inside. If musty odors develop it may be necessary to run a
commercially available cleaner made especially for front loading washers to eliminate such odors.
IF YOUR WASHING MACHINE IS NEW, skip this section and continue below.
BEFORE USING YOUR LAUNDRY PRO 2.0 FOR THE FIRST TIME
DETERGENT AND FABRIC SOFTENER
You may choose to continue to use detergent and/or fabric softeners if desired. However, to completely
experience all the benefits of your new Laundry Pro 2.0, we recommend washing using nothing but cold
water. NEVER apply detergent directly to dry clothes. Allow washer to fill, then add detergent to prevent
staining on clothes.
COLD HOT NORMAL OPERATION
Using your Laundry Pro 2.0 is as simple as turning on the washing machine.
Laundry Pro 2.0 is designed to use the COLD/COLD setting of your washing machine.
HEAVY STAINS
For heavy stains, pre-treat area, apply pre-treater, rub gently and let stand for several minutes. Wash as normal.
BEFORE WASHING CLOTHES
CAUTION
To avoid the possibility of water damage, should a hose leak, always have faucets accessible and turn o faucets when
washer is not in use.
USING YOUR LAUNDRY PRO 2.0

12
Connect to household
plumbing COLD water valve
“Y” adapter
Make sure the “Y” adapter
valve is in the on position.
NOTE:Use a metal “Y” adapter.
Do not use plastic
Connect to HOT water inlet
on washing machine
Connect to COLD water inlet
on washing machine
Disconnect the existing hose
from the HOT valve and washing
machine and remove. Replace with
optional stainless steel hose.
Disconnect this stainless steel hose from
the OUTLET on your Laundry Pro 2.0, then
connect it to the “Y” adapter.
Connect the “Y” adapter to the OUTLET on your
Laundry Pro 2.0. Be sure to hold the fitting with pliers
while tightening the adapter.
Stainless steel hose supplied
with Laundry Pro 2.0.
Some washing machine models require water pressure to both the Hot and Cold valves for proper operation. In some cases, if only the COLD water side is
connected, the water valve will not operate or the washing machine will not fill to the proper level. To solve this problem, the installation of a “Y” adapter (available
at most hardware stores) may be used. The use of the “Y” adapter allows water to flow equally through both the HOT and COLD water valves. Optional stainless
steel hose must be installed on the hot water connection. To Install, turn water o at the valves and disconnect the existing HOT water hose (at the valve and
washing machine). Connect the “Y” adapter to the outlet on your Laundry Pro 2.0, then connect both the optional stainless steel hose and Cold hose from your
washer to the “Y” adapter (see diagram below). Operate your washer on the WARM/WARM setting (your Laundry Pro 2.0 will still be using just cold water).
NOTE: Your hot source water valve will not have a hose connected to it. Make sure it is fully turned o. It is recommended you secure a cap
(available at most home improvement stores) to prevent leakage.
NOTE: The “Y” adapter needs to be purchased locally. Use only a metal adapter. DO NOT use plastic.
FOR WASHERS THAT REQUIRE HOT & COLD WATER INPUT
CAUTION
• Turn o both water valves (hot and cold) before disconnecting hoses; Failure to follow these instructions may result in
water leakage and/or possible injury from hot water
• When connecting hoses to your Laundry Pro 2.0 hand start the hose connector(s); using adjustable pliers, finish
tightening hose connector(s)

13
The Laundry Pro 2.0 monitors its operations with a blue LED indicator:
• Unit on = LED on steadily. (“unit on” means whenever water is flowing through the unit).
• ActivePure Cell Assembly replacement upcoming (@ approx. 7500 hours) = periodic brief LED flash (visual chirp) when unit is o, but goes to steady on
when water is flowing through the unit.
• ActivePure Cell Assembly replacement required (@ approx. 9000 hours) = periodic brief LED flash (visual chirp) whether unit is o or on. UV bulb will
NOT be turned on again until cell is replaced.
• UV bulb failure = periodic brief LED flash (visual chirp) – same as ActivePure Cell Assembly replacement required above.
• ActivePure Cell Assembly replacement: When replacing the ActivePure Cell Assembly, there is a switch on the main circuit board which must pressed.
When this happens, the LED will blink 3 times (longer than the brief “chirp” flashes above) and then shut o. This indicates that the ActivePure Cell
Assembly timer has been reset to 0. Pressing the button at any time before the 7500 hour mark *or* before a bulb failure has been detected will NOT
reset the timer.
• Leak Alarm: LED will flash in conjunction with alarm beeping. If this occurs, please contact Customer Service at 800.572.0502 for assistance.
Some washers monitor the incoming cold water temperature and adjust too cold of water by adding hot water, even if the water temperature is set to cold. If you
have one of these washers, do not install with the “Y” adapter as it may cause the washer to not operate correctly. Consult your washing machine owner’s manual
if needed.
An optional Laundry Pro 2.0 water tap allows you to run water with hydrogen and oxygen based oxidizers for cleaning surfaces, without the cost or chemical
irritants found in most traditional cleaning products.
Status Indicator Light
Circuit Board
TEMPERATURE CONTROLLING WATER VALVES
EXTERNAL WATER TAP (AVAILABLE SEPARATELY)
STATUS INDICATIONS
WARNING
• Electrical Shock Hazard; disconnect power before attempting installation or service
• Electrical Shock Hazard; when working with electrical connections, the appliance and surrounding area should be clean
and dry of any standing water; failure to follow these instructions can result in death, fire, or electrical shock
• Do not operate Laundry Pro 2.0 with the front cover removed or improperly installed; failure to follow these
instructions can result in severe eye damage, death, or electrical shock

14
Does Laundry Pro 2.0 get out tough stains without pretreating? Tough stains will still require pretreatment.
Does the Laundry Pro 2.0 work with all types of water including hard water? Laundry Pro 2.0 will work with all household water qualities, however additional
sediment pre-filtering may be necessary depending on the source water condition.
NOTE: Never use with a carbon filter.
Will the Laundry Pro 2.0 work with commercial washing machines? Laundry Pro 2.0 is designed for residential use only.
Is a plumber required to install Laundry Pro 2.0?
We strongly recommend that a licensed plumber install the Laundry Pro 2.0. Water pressure MUST be checked and within stated specs before
installation. If water pressure is greater than 60 psi, Water Pressure Reducer MUST be used (sold separately). It should be noted there are potential
problems which can arise during the installation depending on the condition of the plumbing in the home and the configuration and location of the washer. If
the cold water valve is stuck or the washing machine needs to be moved back which may require re-leveling, a plumber may be required. Aerus is not liable for
improper installation or damage caused from improper installation and recommends a licensed plumber. Appropriate warnings and concerns are included in
this owner’s manual. Always follow local plumbing codes when installing the Laundry Pro 2.0.
Can I hook the Laundry Pro 2.0 unit up to things other than a washing machine? No. However, Aerus has an optional ActiveClean Port kit you can install on
the Laundry Pro 2.0 to create water with oxygen based oxidizers for other cleaning uses (see page 12).
What eect does Laundry Pro 2.0 have on elastic?
Normal operation of a Laundry Pro 2.0 unit should have no negative impact on elastic in clothing.
Can I let my clothes soak?
It is not recommended that clothes are allowed to soak in Laundry Pro 2.0 water.
Installation procedures can vary according to washing machine model. If you experience installation problems, read the manual first to make sure you have
installed the unit correctly. Call Customer Service at 800.572.0502 for more information.
CAUTION
We strongly recommend that a licensed plumber installs the Laundry Pro 2.0.
FREQUENTLY ASKED QUESTIONS
INSTALLATION PROBLEMS?
For installation or troubleshooting contact your Aerus Distributor or Aerus Customer Service for
further assistance at 800.572.0502 (U.S.) or 800.668.0763 (Canada).

15
LED Illumination State Condition Solution
Blue Steady on Normal operation Unit is operating normally.
Blue
2 Flashes (flash, flash -
2 sec pause, flash, flash
- 2 sec pause.....)
UV bulb start upfailure
1. Press and hold the reset buttonfora couple seconds. When the blue LED flashes 3
times (long flashes), run the unit toverify it’s working.
2. If #1 did not correctthe problem, replacethe ActivePure®Cell Assembly.
Blue(*)
1 Flash (flash - 2 sec
pause, flash - 2 sec
pause......)
Flashes only when water IS
NOT flowing
Unit is working normally however,this indicates it is time to change the ActivePure®Cell
Assembly. The blue LED will continueto flash until theActivePure®Cell Assembly has
been replaced.
Blue(*)
1 Flash (flash - 2 sec
pause, flash - 2 sec
pause......)
Flashes continuously
whether water is flowing
or not.
The unit has shut down as theActivePure®Cell Assembly has reached its end of life .
The ActivePure®Cell Assembly MUST be changed to continue using the laundry unit.
Blue Flashing w/ alarm
Leak, high humidity,
condensation or false
indicator due to electrical
noise in line
Visible leak – Repair as needed.
No Visible leak – (a) Checkforcondensation build up on LPpiping due to cold water temp
and excessive heat in the area or excessive humidity. (b)Try unplugging the unit for 10
seconds to see if the condition is corrected. (c)Verify dryer is vented to the outside. (d)
Make sure the sensor is completely dry.
Noise in the electrical lines –The microprocessor mistakes electrical noiseforleak.
LAUNDRYTOPICS:
Issue Common Cause Solution
Washernot filling, ERR code Washerhas cold watertemp sensor Make sure hot water hose is connected andfully on.
Extra HE washer Use “Y” connectoron washer.Temp setting to warm.
Kinked hose orwatertap not fully open Make sure the hoses are not bent or kinked.Verify cold watertap is
fully open.
Dynamic waterpressure less than 20 psi Connect to a water source with a dynamic water PSI greaterthan 20.
Odors
Source water conditions. Conditions can change
throughoutthe year. Wells without chlorine can grow
odor causing bacteria inthe water.
Adding the Pre-filter can help in many cases.
Mold / Mildew / Bacteria growth or stagnantwater in
washer – Front load machine worse than top loader but
aects both.
At least monthly run a commercially available washer cleaner
through the washer.
Clothes not clean Overloading Reduce the amount ofclothing in the washer.
Incorrect water level or wash cycle Adjust to proper settingfor amount and soil condition of clothing.
Heavy soiled clothing Add a small amount of detergent to wash.
Source water pollutants Adding the Pre-filter can help in many cases.
TROUBLESHOOTING

16
The Laundry Pro 2.0 System does not release into the water any type of harmful chemicals or agents that will harm clothes, the washer, or the environment.
The tables below are answers to common laundry questions compiled by the washing machine manufacturers.
Issue Common Cause Solution
White/Dark spots or stains Grease from agitator bearing or seal Grease from top load agitators can leakand deposit on clothing during
wash. Oldermachines are more prone tothis due to age.
Fabric softener Fabric softeners, the will leave a greasy stain ifit comes into contact with
clothing before FULLY diluted in water. Never pour directly on clothing.
Iron, Magnesium in the source water Minerals can cause clothes to stain.The LP Pre-filter may help for
excessive minerals.
Perfume or body spray/ lotion Perfumes, body sprays or lotions contain chemicals that can cause stains.
Overloaded Reducethe amount of clothes beingwashed.
Oils from rags ortowels used to clean up spills Wash separately. Make sure no oily residue is left in the washer as this will
get on clothes in the next load.
Filter onwasherneeds cleaned and/or replaced
Some washers containwaterfilters that need regularmaintenance. If
applicable, make surethe filteris clean or replace as needed. Contaminates
fromthe filterhave been known to leach out and stain clothing.
Low water Adjust the water level.
Excessive chlorine in source water Adding the LP Pre-filter can help remove excessive chlorine from the
source water.
Dried detergent in washercoming o
Detergents can dry inside the washer. On the drum, underthe agitator,
between the inner and outer drum. When this dried detergent breaks
free and contacts clothing, staining can occur.
White clothing turning grey over
time Mixing of colors Whites should neverbe washed with other colors. Even light- colored clothing can transfer dyes, which will cause whites to grey.
Bleach Ifthe sourcewateris hard, bleach can reactwith some minerals in thewater.
Contaminates in water Wellwater is more prone to issues than city water as it’s not treated or
regulated. Installing a LPPre-filtercan help with some source waterissues.
Overloading the washer Front loadwashers are especially susceptible sincethey only use a small
amount ofwater. Reducethe amount of clothing inthe washer.
Holes in clothing afterwash Chemicals (Bleach) Do not permit clothing to come into contact with bleaching or other
harsh chemicals.
Other clothing – contactwith zippers, exposed
underwire, objects not removedfrom clothing, etc. Remove objects from clothing before wash.
Mechanical – getting caught in the gap betweenthe
drum and door seal. Damaged innertub surface. This may require a washerrepairservice call to correct.
TROUBLESHOOTING (CONTINUED)

17
REPLACEMENT PARTS PART NUMBER
ActivePure®Cell Assembly. 49919
Steel Hose 49701
Laundry Pro Optional ActiveClean Port 49693
Laundry Pro Pre-Filter Kit 49771
Laundry Pro Replacement Pre-filter 49772/49897
To order replacement parts contact use this unit only in the manner intended by the manufacturer.
If you have questions, contact Customer Service at 800.572.0502 (U.S)
or 800.668.0763 (CANADA).
REPLACEMENT PARTS & SERVICE
WARNING
Use only replacement parts recommended by the manufacturer.
ActivePure Cell Assembly
Steel Hose Pre-Filter Kit
Filter
Items included:
High Purity HSG.
Filter HSG. W/SCR
Registration Card
Instruction Sheet
Water Filter
Nylon Adaptor 3/4 MPT - 3/4 MHT
Water Connector Pack Cover
Carton
Corner Insert
Warning Label
Tape
Loctite #8702
Stainless Steel Hose
Filter Wrench
Bar Code Stock Label
ACTIVECLEAN
PORT FOR LAUNDRY PRO
INSTALLATION INSTRUCTIONS
The ActiveClean Port for Laundry Pro includes the adapter hardware with attached tubing and
a Velcro®strap to conveniently store the tubing. (A) Installation is quick and easy. To use the
ActiveClean Port, hold a container under the tube and simply turn the valve clockwise. To turn
off the ActiveClean Port, turn the valve handle counterclockwise until it stops. Use the water
from the ActiveClean Port for cleaning surfaces such as countertops, bathrooms and hard
oors. Great for using with carpet cleaning equipment such as shampooers or extractors.
1. Shut off water at cold water faucet going to the Laundry Pro unit.
2. Turn the washing machine on to relieve pressure from the hoses.
3. Remove power adapter from wall outlet and set aside.
4. Remove the outlet hose from Laundry Pro.
5. Hand thread the ActiveClean Port couple to OUTLET connector on Laundry Pro.
Continue until it is as tight as possible by hand. (C)
6. Finish tightening by using adjustable pliers (only tighten top tting when attaching to
OUTLET connector). Take care not to over tighten as over tightening may damage
the plastic threads of outlet tting. (C) The valve stem should point to the left of the
Laundry Pro. The valve handle should be in the closed position
(pointing toward you). (B)
7. Remove adhesive backing from the included Velcro®strap and place on bottom
of Laundry Pro from a convenient location. (D)
8. Coil the tubing and secure it using the Velcro®strap. (E)
9. Connect washing machine hose to ActiveClean Port connection. Hand tighten until
snug. While holding the ActiveClean Port bottom tting with adjustable pliers, nish
tightening the hose with adjustable pliers. (E)
NOTE: If your washing machine requires water to ow through both the HOT and COLD valves
for proper operation, install a “Y” adapter to the ActiveClean Port. Please see page 11 of your
Laundry Pro owner’s manual.
10. Ensure the ActiveClean Port is in the closed position. (B)
11. Plug power cord into electrical outlet.
12. Turn on cold water valve and check for leaks. Tighten ttings as necessary
to stop leaks if found.
Water treated by your Laundry Pro unit is NOT approved for any internal
consumption such as drinking, bathing, brushing teeth, etc. DO NOT drink, ingest,
or internally consume the water from your Laundry Pro unit or washing machine.
DO NOT provide water from your Laundry Pro to your pets or other animals.
CAUTION:
A.
B.
C.
D.
E.
NOTE:
Hold with pliers
while installing port
in order to prevent
tting from rotating.
Aerus LLC | 5420 LBJ Freeway, Suite 1010 | Dallas, TX 75240 65-00523 VA-00551
ActiveClean Port
Replacement Pre-filter

18
Limit Three (3) Year Warranty
To register your Laundry Pro 2.0 unit, visit aerusonline.com/warranty.
Customer should not repackage and ship the Laundry Pro 2.0 unit because
irreparable damage can occur. For warranty service, please contact
Customer Service at 800.572.0502.
WHAT IS COVERED BY THIS WARRANTY
We warrant the Laundry Pro 2.0 to the consumer, subject to the conditions
below, against defects in workmanship or material, provided that the
products are returned to your distributor within the following time periods:
• Laundry Pro 2.0 within 3 years of date of purchase
• Activepure Cell Assembly within 12 months of date of purchase
INSTALLATION AND MAINTENANCE REQUIREMENTS
This warranty is expressly conditioned upon the following installation and
maintenance requirements: (i) the Laundry Pro 2.0 must be installed,
used & maintained in accordance with the Owner’s Manual; and (ii) all
hoses must be replaced at the intervals prescribed in the Owner’s Manual
(proof of hose change may be required). Failure to meet any of these
requirements will void this warranty. Servicing your Laundry Pro 2.0 by
parties other than an authorized representative and/or using parts other
than genuine parts will also void this warranty.
HOW TO OBTAIN WARRANTY SERVICE
Customers must contact their distributor or Customer Service and provide
proof of purchase within the above time periods. We will repair or replace
and return the product, without charge and within a reasonable period of
time, subject to the conditions in the above paragraphs, if its examination
shall disclose any part to be defective in workmanship or material. If we, in
our discretion, are unable to repair the product after a reasonable number
of attempts, we will provide either a refund of the purchase price or a
replacement unit, at the company’s option.
WHAT IS NOT COVERED BY THIS WARRANTY
This product is intended for household use only and only for use with
municipal water systems. Ordinary wear and tear shall not be considered a
defect in workmanship or material. These warranties do not apply to filters
nor for loss or damage caused by accident, fire, abuse, misuse, improper
installation, excessive water pressure, leaking, modification, misapplication,
commercial use, or by any repairs other than those provided by an
authorized representative. This warranty does not cover any water damage.
EXCLUSION OF OTHER WARRANTIES AND CONDITIONS
EXCEPT AS PROVIDED HEREIN, AERUS MAKES NO REPRESENTATION
OR WARRANTY OF ANY KIND. ALL OTHER WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED, ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
UNAUTHORIZED CHANNELS & MISSING SERIAL NUMBERS
Our products are authorized for sale through Authorized Representatives
only. All warranties are void if a product is purchased through unauthorized
channels. We will not extend warranty coverage on any product sold in a
manner that violates our Internet advertising policies and guidelines. This
includes websites that are not authorized to use our trademarked names,
images and logos, as well as Internet auction sites. These websites would
include eBay®and CraigsList®. If a valid serial number is missing from the
product, the warranty will be voided. To confirm warranty coverage prior to
purchasing a product, contact Customer Service.
LIMITATION OF LIABILITY FOR SPECIAL,INCIDENTAL OR
CONSEQUENTIAL DAMAGES
AERUS SHALL NOT IN ANY CASE BE LIABLE FOR SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING FROM BREACH OF
EXPRESSED OR IMPLIED WARRANTIES, CONDITIONS, GUARANTEES
OR REPRESENTATIONS, BREACH OF CONTRACT, NEGLIGENCE OR ANY
OTHER LEGAL THEORY. Such excluded damages include, but are not
limited to, loss of profits or revenue, loss of the use of the products, and any
loss caused by leaks or other water damage.
FOR U.S. APPLICATION ONLY
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Some states do not allow limitations
on warranties, or on remedies for breach. In such states, the above
limitations may not apply to you.
FOR CANADIAN APPLICATION ONLY
Exclusion of Subsequent Owners: Except as otherwise required by
applicable legislation, this warranty is not transferable. This warranty gives
you specific legal rights and you may also have other rights which vary
from province to province. Some provinces and territories do not allow
limitations on warranties, or on remedies for breach. In such provinces or
territories, the above limitations may not apply to you.
If any provision of this warranty or part thereof is held by a court of
competent jurisdiction to be invalid, illegal or unenforceable, the validity,
legality and enforceability of the remaining provisions or parts thereof will
not in any way be aected or impaired within the jurisdiction of that court.
This entire warranty shall continue to be valid, legal and enforceable in any
jurisdiction where a similar determination has not been made.
This warranty is provided by:
ActivePure Manufacturing, LLC
1300 Valley Drive,
Bristol, VA 24201
SERVICE
Every eort is made to ensure that customers receive an up-to-date
instruction manual on the use of our products; however, from time to time,
modifications to our products may without notice make the information
contained herein subject to alteration. For the latest information, call
customer service at 800.572.0502.
WARRANTY INFORMATION

19
FCC DECLARATION OF CONFORMITY
Name: Laundry Pro 2.0
Model: W1017H
Manufactured by: ActivePure Manufacturing, LLC
This device complies with Part 15 of the FCC Rules.
RESPONSIBLE PARTY
ActivePure Manufacturing, LLC
1300 Valley Drive
Bristol, VA 24201
Ph: 800.572.0502
Signature:
Printed Name: Andrew Eide
Title: Vice President of Product Development
and Manufacturing
Date: 03/31/23
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television, which can be determined
by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the Independent Contractor for help.
FCC DECLARATION & RESPONSIBLE PARTY

LP2.0_OM_65-01003_VA-02014
Aerus, LLC | 1300Valley Drive | Bristol,VA 24201 | 800.572.0502
Aerus Canada, Inc. | 3480 Laird Road, Suite 2-5 | Mississauga, ON L5L 5Y4 | 800.668.0763
© Aerus, LLC. All Rights Reserved
For information regarding the use of this product please contact Customer Service
800.572.0502 (U.S.)
800.668.0763 (CANADA)
Aerusonline.com