Aesculap Exacta User manual

Aesculap
B. Braun VetCare
only UK!
Translation of the original instructions
Exacta/Isis
Originalbetriebsanleitung
Exacta/Isis
Traduction de la notice originale
Exacta/Isis
Traducción del manual original
Exacta/Isis
Traduzione delle istruzioni originali
Exacta/Isis
Vertaling van de oorspronkelijke gebruiksaanwijzing
Exacta/Isis
Översättning av bruksanvisning i original
Exacta/Isis
Инструкция по примению
Exacta/Isis
Tłumaczenie instrukcji oryginalnej
Exacta/Isis
󴄧󳡑
Exacta/Isis
TW

DEUTSCH
3
English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Translation of the original instructions
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Originalbetriebsanleitung
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Traduction de la notice originale
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Traducción del manual original
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Traduzione delle istruzioni originali
Nederlands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Vertaling van de oorspronkelijke gebruiksaanwijzing
Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Översättning av bruksanvisning i original
Русский . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Инструкция по примению
Polski. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Tłumaczenie instrukcji oryginalnej
國語 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
娑钐璧讨鎺

ENGLISH
4
Contents
1. Names of parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Explanation of warnings . . . . . . . . . . . . . . . . . . . . 7
2.2 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3 Important information about dangers . . . . . . . . . 8
13.1 General safety information . . . . . . . . . . . . . . . . . . 9
2.4 Safety during operation. . . . . . . . . . . . . . . . . . . . 11
3. Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.1 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.2 Storing the power cable . . . . . . . . . . . . . . . . . . . 14
4. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.1 Switching On and Off . . . . . . . . . . . . . . . . . . . . . 14
4.2 Comb attachment . . . . . . . . . . . . . . . . . . . . . . . . 14
5. Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . 15
6. What should I do if ... . . . . . . . . . . . . . . . . . . . . . 17
7. Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
9. Two-year guarantee. . . . . . . . . . . . . . . . . . . . . . . 20

ENGLISH
5
Thank you
for choosing the Exacta/Isis, the professional trimmer
from Aesculap.
It utilises state-of-the-art technology, is innovative and
has a strong emphasis on design. When developing the
trimmer, the requirements for a professional trimmer
used in a hair salon were taken into consideration.
The trimmer is specifically designed for precision cutting
of hair contours.
In addition to optimum cutting performance, the
Exacta/Isis provides the following advantages:
• Light weight
• Quiet, low-vibration motor
• Battery operation
• Rapid charge in one hour
• 4-stage cutting length adjustment with comb
attachment
• Cable storage compartment
We hope you enjoy working with the trimmer.
Best wishes
Aesculap Suhl GmbH

ENGLISH
6
10
11
12
13
8
2
6
5
7
3
1
9
4

ENGLISH
7
1. Names of parts
1Charging indicator
2Charging unit
3Charging contacts
4On/Off switch
5Blade set
6Blade set fixing screw
7Charging contacts of the appliance
8Mains adapter
9Cable storage compartment
10 Comb attachment
11 Oil bottle
12 Cleaning brush
13 Allen key (in base of charging unit)
2. Safety
Please read the instructions carefully, especially the
chapter on “Safety”, before using the trimmer. This will
protect you from possible dangers and the appliance
from damage due to incorrect operation.
Keep these instructions in a safe place for future refer-
ence. If you pass on the appliance to someone else, be
sure to hand over these instructions as well.
2.1 Explanation of warnings
In these instructions you will find the following warn-
ings:
DANGER
High risk. Failure to observe the warning
can cause serious injury.
WARNING
Medium risk. Failure to observe the
warning may cause damage to property.

ENGLISH
8
NOTE
Low risk. Points that you should observe when using or
handling the appliance.
2.2 Intended use
• The trimmer must only be used for cutting hair of
small animals.
• The appliance is designed for indoor use only. Do not
use outdoors (garden, patio etc.).
• The appliance was developed for
professional use in grooming-salons
and veterenary practice. Provided the
safety information is observed, it can
also be used in the home.
2.3 Important information about dangers
¾Keep the appliance, charging unit and
cord away from moisture, water and
other liquids, and do not operate with
wet hands.
DANGER
Danger of electric shock!
¾The appliance must never be used or
charged in the bath, shower, over a full
wash basin or other water container, or
with wet hands.

ENGLISH
9
• Do not immerse the appliance, charging unit or cord
in water or rinse them off under running water.
• If the appliance has fallen into water, it must not be
used after that.
• Additional protection is afforded by installing a
residual current device with a rated tripping current
of less than 30 mA in your home electrical system. We
recommend you get an electrician to install a residual
current protection system to protect the circuits..
NOTE
The Clipper may be operated only with a power supply
according to the specifications on the rating plate.
13.1 General safety information
¾Check whether the mains voltage agrees with the
voltage specified on the rating plate.
WARNING
The shaver head can become
hot after extended use!
DANGER
¾Never use the appliance if:
– the appliance, charging unit or cord
are damaged.
– the blade set is damaged or breaking
up, as this could cause injuries to the
skin.
– the appliance has fallen or been
dropped, shows signs of damage or is
not functioning properly.
– the appliance is so badly damaged
that electrical parts are exposed.
In all such cases, disconnect from the mains immediately
and inform Technical Customer Service.

ENGLISH
10
¾Only operate device with the original
power supply.
If the device has the marking T10,
any T10 model power supply can be
used.
This device can be used by children aged 8
or older and people with impaired physi-
cal, sensory or mental capacity or lack of
experience and knowledge if they are su-
pervised or have been instructed regarding
safe use of the device and understand the
resulting risks. Children may never play
with the device. Cleaning and user main-
tenance may not be performed by children
without supervision.
¾Children should be supervised to ensure that they do
not play with the appliance. Be careful to prevent
children from getting injured by touching the blade
set. Keep the appliance out of reach of children.
¾Also keep the packaging material, e.g. plastic film,
away from children.
¾Lay the power cable so that nobody can trip over or
tread on it.
¾Protect the power cable from damage. Never pull on
the power cable. When pulling the mains adapter out
of the power socket, always grasp the adapter itself.
Keep the cable away from hot surfaces. Check the
power cable regularly for damage.
¾Do not expose the appliance to temperatures below
0 °C or above +40 °C for any length of time. Avoid ex-
posure to direct sunlight.
¾To avoid risks, repairs must only be carried out by au-
thorised Aesculap Customer Service Centres. This also
applies to replacing the rechargeable battery.

ENGLISH
11
¾If the cord to the appliance is damaged,
it must be replaced by the manufacturer
or the manufacturer's customer service
or similarly qualified persons in order to
avoid risks.
¾Unplug device from the power supply
for maintenance and part replacement.
¾The blade set must not be dismantled.
2.4 Safety during operation
• To ensure proper functioning of the appliance, the
blade set must be cleaned regularly and oiled in the
appropriate places (see “Cleaning and care” on
page 15).
• The appliance must be switched off whenever:
– you put it down, e.g. to recharge it or stop cutting
hair for a short period.
– you fit or remove the comb attachment.
– you want to clean or oil the appliance.
¾Use the trimmer only in combination with the original
Aesculap accessories (charging unit, comb attach-
ment etc.).
¾Never attempt to remove dust or foreign bodies from
inside the appliance with pointed objects (e.g. with
the tail of a comb).
DANGER
Do not touch the blade set of the active
appliance.

ENGLISH
12
NOTE
The safety of Aesculap electrical appliances is in line with
the recognised state of the art and the German
Equipment Safety Act.
Light-emitting devices such as LEDs or infrared light do
not exceed Laser class 1 of IEC 825-1.
Given the present state of the art, components of
electrical appliances are subject to a certain degree of
wear over time. To ensure perfect functioning and safety,
we therefore recommend regular inspection by the
Technical Customer Service of Aesculap Suhl GmbH.
Service Addresses
Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach / Germany
Phone: [phone]
Fax: [phone]
E-Mail: [email protected]
www.kerbl.com
Further service addresses you can demand from the men-
tioned above address.

ENGLISH
13
3. Preparation
3.1 Charging
The appliance as supplied is not yet ready for operation.
Before plugging in the trimmer, make sure that the
mains voltage agrees with the voltage specified on the
rating plate.
Prior to first use, the appliance should be charged for
2 hours.
It is not possible to “overcharge” the appliance.
NOTE
Should you use both the new hair trimmer and the
previous model, you can charge the new appliance in the
old charging unit (charging time: 16 hours) and/or the old
appliance in the new charging unit (charging time:
16 hours).
¾Place the appliance in the charging unit. It positions
itself and starts charging. The red charging
indicator 1is always on when the appliance is charg-
ing. Make sure the On/Off switch 4is in the 0 position
when charging.
To maintain the charging capacity of the battery we
recommend occasionally draining the battery until
the motor stops.
¾Insert the mains adapter 8in a
power socket.
¾Place the charging unit 2on a
flat surface.

ENGLISH
14
3.2 Storing the power cable 4. Operation
4.1 Switching On and Off
4.2 Comb attachment
If you do not need the full length of
the cord, part of it can be stored in
the cable storage compartment 9.
¾Pull out the mains plug.
¾Turn the charging unit upside
down.
¾Wind the excess cable round the
holder in the base, then run the
cable through the small recess in
the housing to the outside.
¾To switch the appliance on, slide
the On/Off switch 4forward.
¾To switch the appliance off, slide
the On/Off switch to position 0.
¾Switch off the trimmer and slide
the comb attachment onto the
blade set until it snaps into place.
You can now start trimming hair
with the trimmer in the usual way.

ENGLISH
15
The further you push the comb attachment onto the
blade set, the shorter the cutting length.
5. Cleaning and care
To ensure proper functioning and full performance from
your trimmer, clean and oil the appliance regularly.
Cleaning the blade set
If used regularly, the blade set 5should be thoroughly
cleaned once a day.
¾Switch the appliance off.
¾Remove the comb attachment if fitted.
¾Use the cleaning brush 12 to remove any hairs.
Oiling the blade set
To maintain the high-quality cutting performance of the
blade set as long as possible, it must be oiled regularly –
every 10 minutes.
Replacing the blade set
The blade set is subject to wear. Even if you look after the
appliance properly, the cutting performance will deteri-
orate. Replace the blade set when it is worn. The blade
set can be ordered separately as a spare part from
Aesculap Customer Service (see addresses at the end of
these instructions).
¾The comb attachment can be ad-
justed to 4 different cutting
lengths (approx. 3 to 6 mm). To
do so, push it to the required po-
sition on the blade set.
WARNING
Damage to the clipper head caused by its
removal!
¾Never remove the clipper head. Once
removed it cannot be reattached.
¾Remove the comb attachment if
fitted.
¾Lubricate the areas where there
is contact between the upper and
lower parts of the blade set (see
illustration).

ENGLISH
16
While the blade set is removed, you can use the
cleaning brush to remove residual hair from inside the
appliance.
Cleaning the appliance
¾Clean your appliance occasionally with a damp cloth,
then wipe it dry.
Cleaning the charging contacts
If the charging contacts 7on the appliance or the charg-
ing contacts 3on the charging unit are dirty, charging
may not be possible or may be interrupted.
¾Clean the contacts using a cloth or wad of cotton
wool soaked in alcohol or spirit.
Care of the NiMH rechargeable battery
To maintain the charging capacity of the battery we rec-
ommend occasionally draining the battery until the mo-
tor stops.
WARNING
Damage to casing when screwing on
clipper head!
¾Do not over tighten the screw.
¾Make sure the On/Off switch 4
is in the 0 position.
¾Remove the Allen key 13 from
the base of the charging unit
and use it to loosen the blade
set screw 6.
¾Loosen the screw fully and re-
move it.
¾Push the blade set upwards with
your thumb.
¾Push the new blade set on until
it snaps into place and secure it
using the screw.

ENGLISH
17
If the battery is run down (motor stops), be sure to
switch the On/Off switch to 0 and place the appliance
in the charging unit.
¾Make sure you do not leave the appliance switched
on when putting it aside if the battery is run down.
¾Make sure the appliance is switched off (On/ Off
switch to 0) when you place it in the charging unit.
6. What should I do if ...
… the appliance will not switch on?
¾Is the battery low? Plug in the mains adapter for the
charging unit and charge the trimmer.
¾Is the blade set dry? The blade set must be oiled. Pro-
ceed as described on page 15.
… the blade set “sticks”?
¾The blade set must be oiled. Proceed as described on
page 15.
… the charging indicator does not light up when
charging?
¾Clean the charging contacts.
¾The appliance may not be positioned correctly in the
charging unit. Position it correctly.
¾Is the charging unit properly connected?
… the appliance switches itself off?
¾The battery is low. Charge the trimmer.
… the battery will no longer charge?
¾Send the appliance to Aesculap. Our customer service
technicians will fit a new battery and ensure environ-
mentally sound disposal of the old one.
... the device does not turn on?
¾Is the shaver head dirty/sticky? Unscrew the shaver
head.
¾Check that the machine is running.
– If yes, clean and oil the shaver head, see "Cleaning
and care" from page 15.
– If no, send the machine to the Aesculap repair
service.

ENGLISH
18
7. Disposal
This electric appliance is fitted with an
integral battery.
NOTE
The battery must be removed prior to
disposing of the appliance!
¾Unscrew the shearing head.
¾Lever off the control button (see
illustration).
¾Push out the inner part (see
illustration).
¾Pry out the battery (see
illustration).
¾Dispose of the battery,
separately.

ENGLISH
19
At the end of its service life, have the electric appliance
returned to the supplier/stockist or the appropriate
collection point at the local, public waste disposal
facility (recycling center, materials collection center,
etc.).
Electric appliances must not be disposed of as residual or
general waste.
This also applies to electric appliances ultimately used
for other than private purposes, e.g. for trade or com-
merce. Should the relevant local, public disposal facili-
ties refuse acceptance of electric devices used for other
than private purposes, the facilities’ recycling advice of-
fice will provide information pertaining to the environ-
mentally compatible disposal of the items in question.
8. Technical data
Subject to technical change without notice.
Product Exacta/Isis
Mains adapter
Input voltage 220-240 V ~ 50/60 Hz
Emission sound pressure
level LpA ≤70 dB(A)
Total vibration level ah = 2.76 m/s²
Attachment 1 comb attachment
Dimensions 140 x 30 x 36 mm
Weight 120 g

ENGLISH
20
9. Two-year guarantee
Dear Customer,
Thank you for choosing a product from our company.
For decades, the name Aesculap has stood for proven
quality and first-class service. We are known to provide
innovative, high-performance products for our custom-
ers. Aesculap manufactures high-quality devices, using
high-quality materials and careful manufacturing pro-
cesses. We would like to point out to you that we are not
liable for defects in our products, if these are caused by
improper use, normal wear or are caused by the product
being improperly used or if inappropriate or not properly
functioning third-party products are used.
Parts that are typically subject to wear, and for which we
are therefore not liable, are the battery and clipper head.
Defects that do not affect or only negligibly affect the
value or function of the product are also excluded from
our warranty.
If we are liable under our warranty, we reserve the right
to repair or replace the product.
Service Addresses
Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach / Germany
Phone: [phone]
Fax: [phone]
E-Mail: [email protected]
www.kerbl.com
Further service addresses you can demand from the men-
tioned above address.