AGASIO F series User manual

M F N-E- A2

- 2 -
M F N-E- A2
CONTENTS
CONTENTS
CONTENTS
CONTENTS
1. Products Introduction .................................................................................................................... 3
1.1. Specifications ..................................................................................................................... 3
1.2. Applications ........................................................................................................................ 4
1.3. System Requirements ......................................................................................................... 5
2. Interface & Installation .................................................................................................................. 5
2.1. Interface .............................................................................................................................. 6
2.2. I nstallation .......................................................................................................................... 7
2.2.1. Installation in LAN. ................................................................................................. 7
2.2.2. PPPoE Installation ................................................................................................... 8
2.2.3. IP Camera & P C connection .................................................................................... 9
3. IE Browse to IP Camera .............................................................................................................. 10
3.1. Use Finder ........................................................................................................................ 10
3.2. Logging and Active X I nstall ation ................................................................................... 11
3.3. Operation Keys ................................................................................................................. 13
3.3.1. Equipment Status ................................................................................................... 13
3.3.2. Administrator Operation ........................................................................................ 14
3.3.3. O perat ion ............................................................................................................... 15
3.4. Basic Setting s ................................................................................................................... 15
3.4.1. Device Information ................................................................................................ 16
3.4.2. Device Name Settings ............................................................................................ 16
3.4.3. Device Clock Setting s ............................................................................................ 16
3.4.4. Device User Settings .............................................................................................. 17
3.4. 5 . Basic Network Settings .......................................................................................... 17
3.4. 6 . Wireless LAN Settings .......................................................................................... 17
3.4. 7 . ADSL Settings ....................................................................................................... 18
3.4. 8 . UPnP Settings ........................................................................................................ 18
3.4. 9 . DDNS Settings ...................................................................................................... 18
3.4.1 0 . SMTP Settings ..................................................................................................... 19
3.4.1 1 . FTP Service Settings ............................................................................................ 20
3.4.1 2 . Alarm Service Settings ........................................................................................ 20
3.4.1 3 . Reset/ Firm Ware Upgrade ................................................................................... 21
3.4.14 Restore factory S etting s ........................................................................................ 21
3.4.15 Reboot E quipment ................................................................................................ 21
4.Central Management System ........................................................................................................ 22
5. Mobile Access ............................................................................................................................. 22
5 .1. Smart phon e Access .......................................................................................................... 22
6. Others .......................................................................................................................................... 25
6 .1. Port Forwarding S ettings in router ................................................................................... 25
6 . 2 . F series P roduct ion S pecification （Part ）..................................................................... 26
7 .Frequently Asked Questions ......................................................................................................... 27
8 . Warranty ...................................................................................................................................... 28
8 .1. Warranty Terms ................................................................................................................ 28
8 .2. W arranty C ard .................................................................................................................. 30

- 3 -
M F N-E- A2
1.
1.
1.
1. Products
Products
Products
Products Introduction
Introduction
Introduction
Introduction
An IP Camera is a new generation product combin ed with an analog camera & IP
v ideo technology . An IP camera has an analog camera ’ s full function, additionally it
can compress and encrypt video and audio signal through internet by sending them to
remote terminals with its built-in processor and web server. Via its IP address, users
can use standard PC IE browser to view IP camera and monitor targets in real time,
manage and store video or image. PTZ control is also available through network.
Being a new member of camera family, IP camera shares the same operation
function s with the analog camera, such as auto white balance, auto shutter speed ,
AGC, auto backlight compensation etc. On the other hand, IP camera supports remote
access through internet and multi-user visit. Some IP cameras are able to extend to
both analog and digital signal.
F series IP camera ‘ s core is 32Bit RSIC . It adopt s standard MJPEG compression
format. The camera sensor is CMOS which support s auto white balance and backlight
balance, support IE , cell phone browser , centralized monitor interface management. In
general, as its function of audio simplex & duplex, infrared, wired, wireless, POE,
PZT, local storage, it has hundreds of products, to meet requirements of various kinds
of users.
1.1.
1.1.
1.1.
1.1. Specifications
Specifications
Specifications
Specifications
*- Adopt high Performance, strong function media processor 32Bit RSIC
*- High Sensitivity sensor CMOS
*- Adopt optimized MJPEG video compression algorithm, realize high-definition images
transmission in narrow bandwidth ;
*- S upport m aximum 5 users viewing at the same time, no limitation of users if using
Forwarder Server function ;
*- Built in Web Server ，it is convenient for users to use standard browse to realize the
real time monitor ing and setting administration ;
*- Support WIFI: 802.11b/g wireless network ing;
*- Support remote system update ;
*- Support DDNS analysis, support LAN & Internet (ADSL
、
Cable Modem)
*- Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic
DNS, DNS Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g
*- Selected mode l s support one/ two way audio talkback ;
*- Support Motion Detection alarm function (set area & sensitivity) ;
*- Support image snap
*- Abnormal automatic recovery function , if Network Interruption can auto
connection
*- Support mobile view
*- Some models support 15 preset positions and call preset positions when alarming

- 4 -
Parameters F orm
1.2.
1.2.
1.2.
1.2. Applications
Applications
Applications
Applications
The series products usuall y can be applied to big department, supermarket, home,
factory, workshop etc.
Image Compression Format Standard M-JPEG
Sensor
CMOS
，
300,000 pixel
Image Resolution Rate VGA （640x480 ）/QVGA （320x240 ）
Network interface RJ-45/10-100 Base T ，802.11b/g
Network protocol TCP/IP,FTP,SMTP,HTTP,UDP,DHCP ,NTP,DDNS,UPNP,D
NS,PPPOE
Image M ax T ransmission R ate
30 frame/second
（
QVGA
）
, 15 frame/second
（
VGA
）
A lert control
Output: 1 router （5VDC ，0.1A ） ； input: 1 router （closure Trigger ）
Motion Detection Support
Software U pdate Users automatically upgrade
Monitor Mode IE browse or special program
Playback Mode Microsoft Media Player
Security 3rd ranks password authority setting
M inimum illumination
2.0Lux@550nm
Auto White Balance Support
Working environment -10C °– 50C ° ，20% - 80% R H

-
5
-
M F N-E- A2
Untie the pack and check the items contained against the following list :
Wireless IP Camera …………………………………………………………………… 1
Wi-Fi Antenna ………………………………………………………………………… 1
DC Power Supply …………………………………………………………………… . 1
CD ………………………………………………………………………… . ……… ... 1
Manual ……………………………………………………………………………… .1
Mounting B racket …………………………………………………………………… . 1
Screws ………………………………………………………………………………… 2
NOTE: Contact us immediately in the case of any damaged or short of contents.
1.3.
1.3.
1.3.
1.3. System
System
System
System Requirements
Requirements
Requirements
Requirements
Minimum H ardware C onfiguration
CPU: Pentium 1.6 GHz
Memory: 256MB
Audio card : need audio monitor, two way talk essential
Hard Disk : if need to record video image ，no less than 40G
Operation System: 32 bit simple/ English Windows2000 、Windows XP 、
Windows2003
、
Windows Vista & 64 bit simple Chinese/English Windows2003
、
Windows XP
、
Windows Vista etc.
Software environment
IE 5.0 or above version
DirectX8.0 or above version
TCP ／IP network protocol
2.
2.
2.
2. Interface
Interface
Interface
Interface &
&
&
& Installation
Installation
Installation
Installation
There are two kinds of interfaces for F series IP camera: one is body guard interface,
the other is the extend line interface . Here we give detailed explanations on two
representative products :
Non-extended line IP Camera icon E xtended line IP Camera icon

-
6
-
M F N-E- A2
2.1.
2.1.
2.1.
2.1. Interface
Interface
Interface
Interface
Non-extended line IP Camera Tailgate
Power S upply L ight: constant on when power is on
Network light: constant flash when power is on which shows data transmission.
Ethernet interface : RJ-45 interface.
I/O interface: 1 router alarm input, accept 3 , 4 two terminals (input terminal grounding ,
low level effective trigger); 1 router TTL control input, connect 1, 2 two
terminals (1, 2 terminals short connections).
Power input int erface: connect direct current 5V Power
Extension line interface definition icon:
Power: direct current 5V.
GPIO alarm interface: accept external connection linkage alarm equipment (for
example: door magnet, infrared)
Reset line: Short circuit two lines with power off, then power on for 10 seconds to
return back default setting

-
7
-
M F N-E- A2
Ethernet interface: RJ-45 network interface.
Backup : follow-up product extend interface.
About GPIO alarm interface (S terminal) definition:
1# +DC12V
2# RS485 （A）
3# Earth （GND ）
4# IO2
（
OUT PUT
）
5# RS485 （B）
6# IO1
（
IN PUT
）
GND: Ground
，
alarm input ground
，
RS485
ground
RS485: RS485 control interface ，left
connection RS485 negative right connection RS485 positive . connect P/T decoder ，
support variety PTZ protocol.
2.2.
2.2.
2.2.
2.2. I
I
I
I nstallation
nstallation
nstallation
nstallation
IP c amera process image transmission on the network through the us age of
Internet t echnolog y, which offers DDNS function for static IP , dynamic IP and PPPoE
dialing users. IP Camera can connect to outer net through LAN, which can also be
connect ed directly.
There are 3 commonly used network connections in IP Camera:
2.2.1. Installation in LAN.
This is the most popular network access method. As long as there is a router, using
internet cable directly connect router to IP Camera, then IP Camera can be connected
to Internet as normal PC, as showing in the following picture:

-
8
-
M F N-E- A2
2.2.2. PPPoE Installation
Under th is condition, users need to set up PPPoE dialing parameter in IP Camera:
input the username and password provided by ISP supplier ’ offer , this will allow the
IP Camera to connect to i nternet by dialing connects. As for set ting the PPPoE dialing
parameter, you can connect device to network through the first method , then write
parameter to the device , or through the following third method , direct ly write process
parameter to device . Please refer to 3.4.5. for detailed steps on how to set up PPPoE

-
9
-
M F N-E- A2
2.2.3. IP Camera & P C connection
T his method does not use frequently, when you process machine write parameter
or program shift, we suggest you to use the first connect network method to process
the modification of machine parameter.
connect power to IP camera (note : don ’ t apply for wrong power), after one
minute modification of IP camera, video could be connected via internet cable to IP
camera; under the normal condition, yellow light is on, green light flickers , now
physical connection of IP camera are finished. (In order to connect successfully, we
advise to set camera IP as the stable IP at the same net range of PC in LAN , please
refer to 8 frequent asked questions on how to set camera IP as the stable IP at the
same net range of PC in LAN).

-
10
-
M F N-E- A2
3.
3.
3.
3. IE
IE
IE
IE Browse
Browse
Browse
Browse to
to
to
to IP
IP
IP
IP Camera
Camera
Camera
Camera
After IP camera connects to PC LAN through router, you can operate on IP
camera via PC, first please run the relative software in the CD kit
3.1.
3.1.
3.1.
3.1. Use
Use
Use
Use Finder
Finder
Finder
Finder
Open the disk, double click file , and double click search
bar icon will be found, double click search bar, then the f ollowing interface will
appear :
If the internet cable power connect is correct, it should show device styles, name,
and IP address in the device list, (if it dose not show, please confirm power & internet
cable connection).
For the interface, left side is the current computer configuration information;
right side is the selected device network configuration information. D efault IP camera
address will be set automatically according to the LAN , manually setting is not
needed(Note: DHCP should be opened in the router) ,HTTP port is 81 .
Inner
Inner
Inner
Inner Access
Access
Access
Access refers to the LAN access address ;
;
;
; Outer
Outer
Outer
Outer Access
Access
Access
Access refers the WAN access

-
11
-
M F N-E- A2
address.
3.2.
3.2.
3.2.
3.2. Logging
Logging
Logging
Logging and
and
and
and Active
Active
Active
Active X
X
X
X I
I
I
I nstall
nstall
nstall
nstall ation
ation
ation
ation
Before IE monitoring through web, it is necessary to install a video plug-in, there
are 2 kinds of installation mode as shown below:
1. Open disk, file, double click inner , process installation,
th e installation process is as shown below:
a. Click the next step to continue
B efore external net visit IP camera, port forwarding is necessary in the
senior router ,for more detail please refer to “ Port
Port
Port
Port Forwarding
Forwarding
Forwarding
Forwarding Settings
Settings
Settings
Settings in
in
in
in
router
router
router
router ” in 8.1 section.
Note
Note
Note
Note ：
1. Device information indicates IP camera information.
2. When the current computer has a fixed IP, (namely non-DHCP IP), and
the IP camera is used for the first time, please click automatic
automatic
automatic
automatic setup
setup
setup
setup , so
that IP address of the IP camera, gateway and DNS can be synchronous
with the PC.
3. .If it needs manually modify camera name, HTTP interface, IP
address, sub-net mask, gateway, main DNS server, backup DNS
server, etc. please click apply after modification, enter IP camera
username and password, click confirm.

-
12
-
M F N-E- A2
b. Click finish
2. Open web page ，you can directly click open button which is behind inner visit
address or outer visit address in the search bar, also you can directly input relatively
inner and outer visit address in web page address bar such as: http: //192.168. 1 .126
（
LAN
）
, http: // dpvz .ipcam.hk
（
WAN
）
.

-
13
-
M F N-E- A2
3. When the item connects to outer networking, a log-in interface will appear:
Enter log in information, click OK to enter, an installation pop-up will appear,
after installation is completed then you can use it. I f it is blocked and requires plug-in
installation by antivirus software, please remove block .
Note
Note
Note
Note :
:
:
:
1. Default device account is admin ，no password.
2. M series IP camera doesn ’ t support Firefox browser ，while F series support.
3.3.
3.3.
3.3.
3.3. Operation
Operation
Operation
Operation Keys
Keys
Keys
Keys
After sucesseful logging in, it displays monitor image on left side , and control
bottons used for operations on the right side:
3.3.1. Equipment Status
W hen login name or password is wrong , it will show the following hint:

-
14
-
M F N-E- A2
3.3.2. Administrator Operation
Click Sign
Sign
Sign
Sign in
in
in
in , a pop-up will show ,Sign in with ActiveX Mode(for IE)

-
15
-
M F N-E- A2
3.3.3. O perat ion
1. Image mirror indicates a reverse image.
2. Resolution, mode, brightness, contrast d efault setting are : 320*240 、50HZ 、6、4 ，
mode is mainly for the adjustment of L ight strength, please adjust to 60HZ when
light is poor or in dark.
3. There are 3 browse modes in IE mode : visitor, operator, administrator . T he
authority of administrator is the highest . log in as different authorities , the o peration
will be different. Regarding to 3 user authorities , please refer to 3.4.4. Equipment
U ser A dministration.
3.4.
3.4.
3.4.
3.4. Basic
Basic
Basic
Basic Setting
Setting
Setting
Setting s
s
s
s
Click administration operation ，enter the
parameter
Note: in basic setting, when you make a modification , please click setting. A hint
interface will pop up
1
）
the right interface will indicate
the parameter setting operation is s uccessful , p lease
click OK then r efresh .
2) the right interface will indicate the parameter

-
16
-
M F N-E- A2
setting operation is successful, and need restart
to finish setting, please click OK.
If system indicates to restart (as right photo),
please single click yes (Y), and then enter again.
3.4.1. Device Information
The device information includes the above interfaces, device serial numbe r
（
MAC
）、
device system f irmware version, device application firmware version.
3.4.2. Device Name Settings
Here the table displays camera name, such as the name search on search bar , the
name following mentioned as multiple channels equipments setting and so on .
3.4.3. Device Clock Setting s

-
17
-
M F N-E- A2
Y ou can adjust time via NTP server or PC in this table.
3.4.4. Device User Settings
User can p roce ed with setting according to the interface as below . T he system is
available for administrator, operator, visitor whose authority are listed in order. .
N ote: At least one administrator is needed for the device;
3.4. 5 . Basic Network Settings
This sector is for DHCP and IP configuration. The port forwarding is needed, If
you want to set IP address ，please fill in the relative IP address 、s ubnet mask, gateway,
DNS server, Http port;
3.4. 6 . Wireless LAN Settings

-
18
-
M F N-E- A2
Referring to the wireless networking s etting , there are 5 security modes: None,
None,
None,
None,
WEP,
WEP,
WEP,
WEP, WPA
WPA
WPA
WPA Personal
Personal
Personal
Personal （TKIP,
TKIP,
TKIP,
TKIP, WPA
WPA
WPA
WPA Personal
Personal
Personal
Personal （AES
AES
AES
AES ）,
,
,
, WPA2
WPA2
WPA2
WPA2 Personal
Personal
Personal
Personal （AES
AES
AES
AES ）and
and
and
and
WAP2
WAP2
WAP2
WAP2 （TKIP+AES
TKIP+AES
TKIP+AES
TKIP+AES ）.
.
.
.
Note:
1. T o connect internet t hrough wireless network, the camera SSID number must be
the same with the wireless router and other AP device SSID number,
2. Our default camera SSID number is dink.
3.4. 7 . ADSL Settings
While camera need s to be connected to ADSL directly , just tick the ADSL box to run,
then enter the ADSL user name and ADSL password which provide d by ISP (network
suppliers), and click to save ;
3.4. 8 . UPnP Settings
The full name of UPnP is Universal Plug and Play, which is Plug_and_play . It is the
same saying as a utomatic port forwarding. If users need to use this function , router
must support this function and users just need to run it , then tick the above box;
3.4. 9 . DDNS Settings

-
19
-
M F N-E- A2
All the above information are set up when the device is ready. U sers generally do
not need to change. I n case of any accidental loss , user need s to re-obtain the domain
name, and fill it himself, juts do as the above , the user ’ s name is just the first four
characters , and this is for remote access. For example, http: //abcd.ipcam.hk, the
user ’ s name is abcd. The password is DDNS. (The password can be obtained on the
device body or contact the supplier) . When connected, it display s " xxxxx is OK" on
DDNS state; it means that it was successfully set. If you need to use your own
Dynamic DNS, please select the appropriate service providers ( on DDNS service)
then enter the following information , then save it;.
3.4.1 0 . SMTP Settings
The above setting is a preparation for the alarm function, the sender ’ s email
address should be entered by the sender ，while the r ecipient E-mail address is filled in
by recipient 1,2,3,4. SMTP s erver should be filled in t he sender email SMTP s erver ，
for example t he sender email address is [email protected] ，then here enter mail.163.com.
Generally SMTP port is 25
，
no need to change. If the SMTP port required to check,
just tick it, and enter SMTP user name and SMTP password, which are provided by

-
20
-
M F N-E- A2
Email provider ，then test according to reference. If report needs to send, please tick
report internet IP by Mail. The e-mail server and other information can be obtained
from the mail service provider . The email notifications are pictures captured by
camera when alarm is on. if no email notification is needed , there is no need to choose
this one..
3.4.1 1 . FTP Service Settings
Above setting is equally similar to Mail Server Settings
，
w hen alarm ing is on it
will send pictures
，
please enter FTP server, FTP port, FTP user, FTP password, FTP
u pload directory and FTP mode. The FTP mode has two options : PORT and POSV.
If a quick upload picture is need , select Upload Image Now and change its interval
（second ）。
3.4.1 2 . Alarm Service Settings
As shown below , there are two modes of a larm trigger . One is motion detection,
pleas refer to below interface
，
the s ensitivity of motion detect ion can be adjusted
according to the users
′
requirement, t he higher the number is , the lower sensitivity
is. Another one is input alarm, when connected, it triggers alarm t hrough alarm input
signal which connects to l inkage alarm GPIO ;
When triggered, there are 3 alarm modes: one is IO alarm linkage , camera
connects with l inkage alarm box through GPIO , sound the siren
；
t he second is email
notification , send email with images captured
；
the last is upload pictures alarm
，
as the
way mentioned before FTP upload pictures alarm, U pload pictures interval
（
second
）
keeps consistent with the mentioned u pload pictures interval of Ftp service settings.
The s chedule refers to arming time
，
as the selected time interval: 0: 00 minute per
week to 0: 45 minutes and Monday 1: 00 hour and 2: 00 hour
。