Agora PREMIER PRO Goals User manual

agora
agorasoccer.com
R
Goalcan fall over
causingserious
injuryor death.
!
WARNING
ALWAYS
ANCHORGOAL
NEVERCLIMB
ONGOAL
Unsecuredgoal
canfall over causing
injuryor death.
Assembly Instructions
PREMIER PRO Goals SA-GD406S, SA-GD618S, SA-GD721S, and SA-GD824S
GOAL SAFETY INSTRUCTIONS
IMPORTANT! PLEASE READ BEFORE GOAL ASSEMBLY
• Read all instructions before beginning assembly.
• 2 or more adults may be required to assist in assembly.
• Unpack and inspect all parts / hardware for quality and structural integrity. Contact Customer Support if any
item is damaged or missing.
• All Safety and Warning labels must be visible.
• Securely anchor or counterweight movable goals at ALL times.
• Prevent tip-over injuries by NEVER leaving goal unattended or unsecured. Goal should be anchored,
chained to another goal or to an adjacent fence post of high structural integrity, or stored away from child
access.
• Educate players, coaches, maintenance personnel and other individuals using / interacting with the goal on
the proper usage, safety measures, and potential hazards of movable soccer goals.
• Instruct players, coaches, and other members NEVER to climb goal net or frame.
• Goal should only be moved by proper number of trained adults with extreme caution.
• Goal should NEVER be used on unleveled playing fields.
• Net should be removed when goal is not in use.
• Disassemble goal during off-season or prolonged disuse.
1/5
Two
Rev_2023-08-24
Questions

PARTS, HARDWARE, & TOOLS
Important! All directional descriptions (i.e. Left, Right) are based on the front of the goal facing you. Hardware may be housed in one or more
separate boxes. Please open all boxes / packaging before assembly.
2/5
A- Top Crossbar (1) Contains Warning Label
B- Bottom Crossbar (1) Contains no labels
C- Left Post (1) With channel system facing back, AGORA logo on left
D- Right Post (1) With channel system facing back, AGORA logo on right
E- Base (2) Contains no labels. Has 5 holes on each end.
AA - Crossbar
Corner (4)
Channel system is lined
on the outside of the ‘L’
BB - Post Corner (2)
Channel system is lined
on the inside of the ‘L’
S- Backdrop Lock
Bracket (6)
Backdrop Lock, Bracket,
Bolt, and Washer comes
pre-installed on Backdrop
Arm (DD) and Backdrop
Shoulder (CC)
R- Base
Bracket (4)
4 holes, attaches
to Bases E
Q- Crossbars/Posts
Brackets (8)
2 holes, attaches to parts
A, B, C, and D
CC - Backdrop
Shoulder (2)
Includes pre-installed
bolts and angled
brackets
DD - Backdrop Arm (2)
Includes pre-installed bolt and
angled bracket
F- Post
Brace (2)
G- Net (1) H- Net Clips
(1 Set)
I- 14” Steel
Anchor Nails (4)
(Images not to scale)
HARDWARE & TOOLS
NOTE: Hardware may be housed in one or more separate boxes. Please open all boxes / packaging before assembly.
Semi thread
Semi thread
Full thread
Use with 2” Hex Bolt
J- 2” Hex Bolt (4)
L- ¾” Hex Bolt (20)
M- 3/8” Hex Nut (4)
N- 3/4” Washer (28)
O- 11/16” Wrench (1)
P- Allen Wrench (1)
K- 1 ½” Hex Bolt (4)
Goalcan fall over
causingserious
injuryor death.
!
WARNING
ALWAYS
ANCHORGOAL
NEVERCLIMB
ONGOAL
Unsecuredgoal
canfall over causing
injuryor death.
Goalcan fall over
causingserious
injuryor death.
!
WARNING
ALWAYS
ANCHORGOAL
NEVERCLIMB
ONGOAL
Unsecuredgoal
canfall over causing
injuryor death.
!!
Assembly Instructions for Premier Pro Goals: SA-GD406S, SA-GD618S, SA-GD721 and SA-GD824S
Rev_2023-08-24
Questions

ASSEMBLY START
Connect Side Posts
1. Connect Left Post (C) to
Crossbar Corner (AA)
following FIG. A.
Note: Crossbar/Posts Bracket (Q)
may already be pre-inserted into the
top of the Side Post OR Crossbar
Corner. Please remove plastic ties
before bolting.
2. Connect Left Post (C) to
Post Corner (BB) following
FIG. B.
Note: Crossbar/Posts Bracket (Q)
may already be pre-inserted into the
bottom of the Side Post OR Post
Corner. Please remove plastic ties
before bolting..
3. Perform steps #1 and #2
for Right Post (D).
BACKDROP, POST,
AND TOP CROSSBAR
ASSEMBLY (2 LOCATIONS)
BASE & BOTTOM CROSSBAR
ASSEMBLY (2 LOCATIONS)
ASSEMBLY DIAGRAM
POST CORNER ASSEMBLY
(2 LOCATIONS)
A
B
C
D
E
E
AA
AA
AA
AA
BB
BB
CC
DD
F
3/5
Post Corner (BB)
Post Corner (BB)
Post Brace (F)
1 1/2” Hex Bolt (K)
1 1/4” Hex Bolt (L)
1 1/4” Hex Bolt (L)
(Q)
(Q)
Left Post (C)
Top of
Left Post
(C)
Left Post (C)
Washer (N)
(Warning Label)
(AGORA logo)
Crossbar
Corner
(AA)
FIG.A
FIG.B
Goalcanfall over
causingserious
injuryordeath.
!
WARNING
ALWAYS
ANCHORGOAL
NEVERCLIMB
ONGOAL
Unsecuredgoal
canfallover causing
injuryordeath.
Assembly Instructions for Premier Pro Goals: SA-GD406S, SA-GD618S, SA-GD721 and SA-GD824S
Rev_2023-08-24
Questions
R
R
R
S
S
S
Q
R
Q
Q
Q
S
S
Q
Q
S
Q
Q

Bottom
Crossbar (B)
Base
(E)
Base
(E)
Crossbar
Corner (AA)
Crossbar Corner
(AA)
Connect Goal Face
4. Connect Left and Right
Assembled Posts to Top
Crossbar (A) following FIG. C.
Note: Crossbar/Posts Bracket (Q) may
already be pre-inserted into the
Crossbar OR Crossbar Corner. Please
remove plastic ties before bolting.
Connect Base
5. Connect Bottom Crossbar (B)
to Crossbar Corners (AA)
following FIG. D.
Note: Crossbar/Posts Bracket (Q) may
already be pre-inserted into the Bottom
Crossbar OR Crossbar Corner. Please
remove plastic ties before bolting.
6. Connect Base (E) to
Crossbar Corners (AA)
following FIG. D.
Note: Base Bracket (R) may already be
pre-inserted into the Base Bar. Please
remove plastic ties before bolting.
Connect Face to Base
7. Raise Bottom Crossbar/Base
assembly and insert into Top
Crossbar Assembly following
FIG. E. Ensure all connections
are secure and firmly pushed
prior to bolt assembly.
Note: Base Bracket (R) may already be
pre-inserted into the Base Bar. Please
remove plastic ties before bolting.
Tighten bolts on both left and
right sides.
Top
Crossbar
(A)
(Q)
1 1/4” Hex Bolt (L)
Right Post (D)
FIG. C
Left Post
(C)
Top Crossbar
(A)
AGORA logo
Warning Label
Right Post
(D)
Goalcanfallover
causingserious
injuryordeath.
!
WARNING
ALWAYS
ANCHORGOAL
NEVERCLIMB
ONGOAL
Unsecuredgoal
canfallovercausing
injuryordeath.
FIG. E
Top
Crossbar
(A)
Bottom
Crossbar
(B)
Left Post
(C)
Top
Crossbar (A)
Bottom
Crossbar (B)
Base
(E)
Base
(E)
Base
(E)
Right
Post (D)
Right Post (D)
1 1/4” Hex Bolt (L)
Post Brace (F)
1 1/2” Hex Bolt (K)
Washer (N)
(R)
4/5
(2 LOCATIONS)
(2 LOCATIONS)
(2 LOCATIONS)
Bottom
Crossbar (B)
Base (E)
(Q)
(R) Crossbar
Corner (AA)
1 1/4” Hex Bolt
(L)
1 1/4” Hex Bolt
(L)
FIG. D
Assembly Instructions for Premier Pro Goals: SA-GD406S, SA-GD618S, SA-GD721 and SA-GD824S
Rev_2023-08-24
Questions

5/5
Assembly Instructions for Premier Pro Goals: SA-GD406S, SA-GD618S, SA-GD721 and SA-GD824S
Rev_2023-08-24
Questions
FIG. F
Top Crossbar (A)
Backdrop Shoulder
(CC)
Backdrop Arm
(DD)
2” Hex Bolt (J)
Crossbar Corner (AA)
(S)
Right Post (D)
(2 LOCATIONS)
Washer
(N)
Nut (M)
Connect Backdrop
9. Connect Backdrop Shoulder (CC) and
Backdrop Arm (DD) following FIG. F. Simply
screw Backdrop Shoulder into channel system.
Note: Backdrop Lock Bracket (S) comes pre-installed on
Backdrop Arm (DD) and Backdrop Shoulder (CC).
Top Crossbar
(A)
Bottom
Crossbar (B)
Attach Net
10. Attach top half of net using
provided Net Clips (H). Fit net
through Net Clip loop, insert net
into channel system, and twist to
lock. Next, carefully flip goal over
(Bases should now sit on ground)
and attach remaining bottom half
of net to bottom of goal.
Anchor
11. Anchor goal using provided Steel Anchor Nails (I).*
*Also compatable with other semi-permanent and permanent anchors (sold separately).
STORAGE
2. Fold goals face down
Goal tip-over can cause serious injury or even death. Most cases occur when goals are left unattended.
Remove net and disassemble goal during off-season or prolonged disuse using one of the methods below.
3. Chain Goals to a nearby
fence or other sturdy structure
1. Anchor or chain
one goal to another
Lock &
Chain
Lock &
Chain
(S)
(S)