Agora SA-G61206S User manual

Assembly Instructions
agora 6'6”x12' PREMIER GOAL (SA-G61206S)
agora
®
agora Back-Bottom Bars are 100% aerospace-grade aluminum
for all-weather, heavy-duty performance and lightweight
convenience and safety. Push-button connections.
Two person assembly required.
ASSEMBLY:
1. Lay the pieces on the field and assemble
crossbar.
2. Connect top corner pieces to ends of crossbar.
3. Connect side post (2 shorter pieces with
warning sticker).
4. Connect bottom corners pieces.
5. Connect the 2 base pieces to other end
of corner pieces.
6. Between two people raise the goal carefully
into place.
7. Attach goal anchors.
63" 36"
64" 64"
63" 63"
63"
Push-buttom assembly GENERAL WARNING - CAUTION
WARNING This equipment must be anchored at
all times. Moveable goals and equipment can tip
over causing severe injury or death. Never climb
on the cross bar or netting. This equipment sho-
uld not be set up, installed or used by participants
without proper training or supervision. This pro-
duct has been manufactured in comformity with
all applicable safety standards. The user is res-
ponsible for the use of this product and assumes
all risk of injury.
Never climb on goals.
Goal can fall over causing
serious injury or death.
!WARNING
STEP 1 & 2
STEP 3 & 4
STEP 5
agora
®
agorasoccer.com
agora
Rev_2014-08-21

Rev_2014-08-22
Fits Semi-Pro & Premier 6’x12’ Goals
(SA-GB12)
63” 63”