58
cause severe burns.
•
• Raise the container for sterilization and for steaming and the kettle only
should cover the bottom of the tank; otherwise, the water may evaporate
leaving the device without water.
•
and the bottom base (stand) of the device. This is normal and does not
• Be sure to check the temperature of the milk warmed up in the device
and baby food before feeding the baby!
•
and the surface of the heating element depending on the hardness of the
water used. The harder the water is used, the faster the scaling is formed.
-
tain optimum performance, clean the device regularly, as described in the
«descaling» section.
• Before cleaning, be sure to unplug the kettle and allow the device to cool
down, if necessary.
• The device has protection against overheating and switching on with-
device if there is not enough water in it or it is completely absent.
• If you do not plan to use the kettle for a long time, unplug it from the
mains, drain the water and allow the device to cool (if required) and dry.
• When disconnecting the device from the mains pull the plug and do not the
cable.
• Keep the device out of the reach of children. Do not allow children to use
the device as a toy.
• If any malfunctions are detected, stop using the device and contact a
specialized service center. Do not attempt to repair the device by yourself.
• The manufacturer is not liable for damage caused by non-observance
of safety regulations, as well as a result of the improper or unintended
use of this instruction.
