Note: the coffee you get will less than the water you have added, as some water is
absorbed by coffee ground.
9. When the process is finished, if you do not want to serve immediately, keep the coffee
maker is energized, the coffee can be kept warm in the warming plate. The appliance will
be cut off power automatically after 40 minutes if it has not been manually disconnected at
the completion of brewing. For an optimum coffee taste, serve it just after brewing.
10. Always turn the coffee maker off and disconnect the power supply when not use.
Note: pay attention to pour the coffee out, otherwise you may be hurt as the temperature
of coffee just finished is high.
If you do not want the coffee maker to start operation immediately, for
example now it is 5:10 pm, you hope that the coffee maker will
automatically start at 8:15 in the evening, first follow steps 1 to 5 of
above section, then you can set the automatic start function as
1. Press PROG button one time, the word CLOCK is showed at the
up-right corner on display.
2. Press the HOUR and MIN button continuously to set the present
time (real clock), that is 17:10 (See fig. 1).
Note: the time cycle is 24 hours.
3. Press PROG button once again and the word TIMER shows on up-left corner of display.
4. Set the delayed starting time by pressing HOUR and MIN button repetitively, that is
20:15 (see Fig. 2).
5. Press the ON/OFF twice, the indicator of AUTO will illuminate. The LCD will display the
current clock. You may see the automatic start time by pressing PROG.
Note: You may cancel the automatic start function by pressing ON/OFF once to stop
machine, or pressing ON/OFF button twice to start brewing immediately. If you want to
change the automatic start time, only following the above 1-5 steps again.
When the time is due the indicator of AUTO will go out, while the indicator of RUN turn on
and the unit starts brewing. The appliance will be cut off power automatically after two
hours if it has not been manually disconnected at the completion of brewing.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical
shock, do not immerse cord, plug or unit in water or liquid. After each use, always make
sure plug is first removed from wall outlet.
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product’s exterior surface with a soft, damp cloth to remove stains.
3) Water droplets may buildup in the area above the funnel and drip onto the product base
during brewing. To control the dripping, wipe off the area with a clean, dry cloth after each
use of the product.
4) Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean
it.
20:15
TIMER
Fig.2
Fig.1
CLOCK
17:10
