Aicok GC-CP001K User manual

Portable Coffee
Maker
READ THIS BOOKLET THOROUGHLY
BEFORE USING AND SAVE IT FOR FUTURE REFERENCE
INSTRUCTION MANUAL
GC-CP001K
Booth No.3H012, Trading Plaza, No.5, Huanan city,
Shenzhen Impression E-commerce Co.,Ltd
Pinghu Street, Longgang District, Shenzhen, China
Facebook Page: https//www.facebook.com/aicoks/
Website: www.aicok.cc Made In China
HOUSEHOLD USE ONLY

[Preface]
Thank you for purchasing our portable coffee maker. In order to proper-
ly use and maintain this product, please read this Manual carefully and
keep it properly for future reference.
This Manual only applies to the coffee makers of our company. We
reserve the right of final interpretation. All the contents in this Manual
are only for reference. For unaccomplished matters, please consult the
customer service department. Any opinions and suggestions are appre-
ciated. Hope that our products bring warmth, convenience and health
to your life.
● Do not touch the metal surface inside the coffee maker after
using.Pay special attention to avoid children touching (may
cause burns).
● Cover the water tank properly when it is in use.
Too much water in the tank may cause hot water to overflow
when it is boiling (may cause burns).
● Do not shake the body during use.
It may cause overflow of hot water (hot coffee) (may cause
burns)
● Do not make water level exceed the MAX (maximum) of the
tank when adding water.
It may cause spillage.
● Pay attention to the usage of the power cord and plug.
● Please use a separate power socket that is rated at 5A/220-240V.
Abnormal heating may occur (may cause fire) when it shares a
multi-function socket with other electrical products
If used, multi-purpose socket must be rated above 5A and used
separately
1 2
[Safety Precautions]
Please be sure to read safety-related content carefully in order to avoid
hurt and injury to you and other people.
● Incorrect usage may cause 2 levels of hazards:
●Be careful to avoid burn:
● Description of safety symbols:
[Warning]
Warning: Burns may be caused.
Attention: Danger may be caused.
Prohibited Mandatory

● Insert the power plug securely into the socket until it reaches the
bottom.
(It may cause fire due to electric shock and short circuit)
● Clear the dust that adheres to the power plug regularly.
Moisture may cause insulation failure (may result in fire)
→ Wipe the power plug with a dry cloth.
● Do not plug the power plug with wet hands (may cause electric
shock).
● Do not damage the power cord and plug.
Do not process, damage, excessively bend, forcefully pull or
twist the power cord and plug, approach to heating objects,
place heavy objects on or extrude the power cord or plug (may
cause fire due to electric shock and short circuit).
● Do not use the product if the power cord or plug is damaged, or
if the plug is loosened when plugged into the socket (may
cause fire due to electric shock and short circuit).
● To prevent accidents, be sure to observe the following:
● Do not allow children to use this product alone. Do not use this
product in children accessible places (May cause burn, electric
shock or injury).
● Do not disassemble, repair or modify this product
(May causes burn, electric shock and injury) → Please consult
with the [Advice and Liaison Window] for repairs
● Do not immerse the product in water and splash water on it
(May cause fire due to electric shock and short circuit)
● In case of any exception and failure, immediately stop using
and pull out the plug from the power socket.
(May cause smoke, fire, electric shock, burns, and injuries)
<Example of exception and failure >
● Do not use the product in the following situations
● Do not use the product on unstable places or uneven mats
(may cause product fall down)
● Do not use the product near fire (may cause fire)
● Pay attention to the use of power plug
● To pull the power plug, hold the power plug rather than the
power cord.
(Cause fire due to electric shock or short circuit).
● Unplug the power adapter from the product when it is not in use
(insulation deteriorating may cause incorrect heating and fire.)
● Before installing, removing or cleaning accessories, unplug the
power adapter from the product (to prevent heating due to
false triggering).
● Pay attention to burns or injuries
● Do not operate the product in the process of making coffee
(may cause burns)
● Do not touch the product or other hot parts during or immedi
ately after use (may cause burns)
● Clean the product when it has cooled down (may cause burns)
34
● The power cord or plug is deformed, discolored, or damaged;
● Part of the power cord or the power plug is hot;
● The power supply is intermittent if the power cord is moved;
● Abnormal heating or scorching smell occurs in the product;
● The product has abnormal sound during operation.
※Please contact our sales department for maintenance and repair.
● Before and after using the product, rinse and wipe the water tank,
extraction chamber and cup thoroughly, and keep it properly. If
coffee components remain, it will affect the taste of the coffee made
next time.
● When use, pay attention to avoid foreign body between the foam
cup and the heating plate.
● Do not use this product on carpets or tablecloths that are easily
stained by liquids.
● Do not put small accessories in the mouth and swallow them.
● Do not store the coffee maker after it has been dipped in water, or
else it may cause water to enter the interior.
[Attention]
[Attention]

56
● Do not put the coffee cup in the dishwasher or dish dryer, or else it
may be deformed due to heat.
● If the product is dropped on the floor, unplug the power adapter and
disconnect it from the power source. If there is a problem with the
product, please contact the service department of the company.
● Do not keep the coffee in the cup for a long time, or else it may cause
corruption and deterioration of the ingredients.
● The lid of the water tank isn’t fully sealed. If you move with the product
containing liquid, it may overflow.
● Keep the coffee maker away from heating objects such as oven,
which may cause deformation and discoloration.
● Install the seal ring of the cover securely, or else it may cause liquid
splashing or failure to close the lid.
● The cup may become dark brown because the contents contain
coffee or tea ingredients. This will not affect normal use.
● Do not put the cup in the freezer (may cause deformation)
● Do not use the product without liquids (may cause malfunction).
Tip: This coffee maker is for household use only. [Accessories]
[Operation guide]
[Name and Usage of Each Part]
Pay attention to the MAX line in
the water tank
Charger hole
(for connecting the
power adapter or car
charging cable)
Car charging cable
Tank lid
Button
Maker body
Cup
※If the water (hot water) exceeds the MAX, it may overflow.
1.Switch button; press it to show battery status:
blue light indicates normal and pink light
indicates low power
2.If power adapter is connected, press and
hold it for 1.5 seconds to start heating, press
and hold for 3 seconds to make coffee
3.If no power adapter is connected, press and
hold it for 3 seconds to make coffee
(See above for details)

78
[How to Use]
Capsule
MAX water level
Coffee
Extraction chamber
Extraction chamber
1. Unscrew the cup and put the K-CUP
capsule into the extraction chamber (see
appendix for assembly/disassembly
methods of the cup and extraction
chamber)
Attention:
2. Put the extraction chamber back
into the coffee maker and install the
cup.
Attention:
● The extraction chamber and cup
must be rotated and laid properly
2. Put the extraction chamber back
into the coffee maker and install the
cup.
Attention:
● The extraction chamber and cup
must be rotated and laid properly
3. Inject 150ml hot water into the
water tank. The temperature of the
hot water can be determined
according to personal preferences.
Cover the top lid.
Attention:
● The level of the hot water mustn’t
exceed the MAX line
Cup

Press the switch button; if the pink light turns on, it means that the lithium
battery power in the coffee maker is insufficient (blue light indicates
sufficient power). Please use the power adapter or car charging cable
to charge the lithium battery of the coffee maker: connect the power
adapter to the coffee maker and then connect the adapter to the
power source. At this time, the switch of the coffee maker flashes
alternately among red, pink and blue, and stays on blue when the
charging completes. You can also use the car charging cable to
charge the coffee maker.
[Charging]
910
[Troubleshooting]
[Appendix]
[Assembly/disassembly of cup]
1. After using the coffee maker, wipe the coffee maker body, water
tank and lid with a sponge. You can also wash it with tap water and
then dry. Make sure that the charging hole is sealed before cleaning.
[Cleaning and Maintenance]
Wipe the water marks carefully
※Please consult and repair at any time.
Failure
No power
Indicator light is pink
Cause Treatment Reference
Hold the water tank lid with
your hand, turn counterclock-
wise by 10~15° to pull the lid
away from the coffee maker.
Similarly, put the lid on the
water tank of the coffee maker
and turn it clockwise to install.
Hold the cup with your hand and rotate
clockwise by 10~15° to pull the cup away from
the coffee maker. Similarly, put the cup on the
bottom of the coffee maker and turn it
counterclockwise to install.
2. Wipe the water on the coffee maker
with dry sponge; do not immerse the
coffee maker in water.
3. The cup extraction chamber and coffee
powder container can be removed and rinsed
with tap water, wiped and then installed onto
the coffee maker
Check if the power plug is loose?
Check if the product is used
continuously and if it is charged
after use
Insert the power plug into
the power socket properly
Connect the coffee maker
to the power adapter
The cup has an odor
Check if there is any residue of
the coffee ingredients
Clean the cup carefully
● Assembly/disassembly of tank lid, cup and extraction chamber
[Assembly/disassembly of tank lid]

11
[Assembly/disassembly of extraction chamber]
[Parameters and Maintenance]
● Parameters
● Maintenance
In order to use this product safely for a long period of t
ime, please carry out product maintenance regularly.
※Product parameters are subject to change without prior notice
※Performance may be different in specific areas
(highlands, cold areas, etc.)
The extraction chamber exposes
when the cup is removed; hold the
extraction chamber with your hand
and rotate clockwise by 10-15° to pull
the extraction chamber away from
the coffee maker. Similarly, put the
extraction chamber on the bottom of
the coffee maker and turn it counter-
clockwise to install.
Battery voltage
Rated power
Capacity
Product size
Weight
Cup capacity
3.7V
75-80W
150ml
Φ75*203 mm
About 0.54kg
200ml
Power cord length 950mm