Aigis Mechtronics MLR Series User manual

Trim
Ring
Mini
Mini/VariDome
A
dapter
Plate
Up if wall
mounted
INSTALLATION AND OPERATING INSTRUCTIONS
MINILINE RECESSED MOUNT KIT
MLR SERIES

SAFETY PRECAUTIONS
The exclamation point within an equilateral triangle
is intended to alert the user to presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the appliance.
SECURITE
Le point d'exclamation à l'intérieur d'un triangle
équilatéral avertit l'utilisateur de la présence d'in-
structions importantes d'utilisation et de mainte-
nance dans la documentation accompagnant l'ap-
pareil.
SICHERHEITSVORKENHRUNGEN
Das Ausrufezeichen in dem gleichseitigen Dreieck ist
dazu da, den Benutzer auf wich-tige Inbetriebnahme-
und Instandhaltungs-vorschriften hinzuweisen, die
dem Gerät in Form einer Broschüre beigelegt sind.
PRECAUCIONES DE SEGURIDAD
El símbolo de exclamación dentro de un triángulo
equilátero, se muestra con el objetivo de alertar al
ususario de que instrucciones de operación y man-
tenimiento importantes acompañan al equipo.
2
IUNPACKING
Unpack carefully. Check to ensure that the following items are
included for the applicable modules ordered:
•MLR: Recessed Mount Kit
This kit should be used with Aigis Indoor MLP MiniLine Series
products
Recessed mount kit can be mounted in the wall or ceiling.
2SERVICE
If the unit ever needs repair service, the customer should con-
tact the nearest Aigis Mechtronics for return authorization and
shipping instructions.

3INSTALLATION
ATTENTION: Installation should be performed by qualified service personnel only, in accordance
with the National Electrical Code or applicable local codes.
3
Wall or ceiling surface
Up if wall
mounted
Horizontal if
wall mounted
6.0
Center-to-center for
trim ring screw holes
7-1/2
Allow clearance
for trim ring
STEP 3
Attach adapter plate to rear of dome.
Use two #6-32 x 3/4 screws supplied
with Recessed Mount Kit.
STEP 2
Install wall bracket and
tighten toggle bolts (see
also Figure 2 for details).
STEP 4
Connect power and
video leads, then install
dome by attaching adapter
plate to wall bracket.
STEP 5
Attach trim ring to wall bracket
by using the trim ring’s
captive flat head screws.
STEP 1
Cut hole using
included template.
Horizontal
(if wall mounted)
Trim Ring
Mini/VariDome
Adapter
Plate
Fig 1 Installing Recessed Mount Kit
Fig 2 Mounting of Wall/Ceiling Bracket for MLR

100 0039 002 AIG 02/03
Printed in U.S.A.
©2002 Aigis Mechtronics
1124 Louise Road,Winston-Salem, NC 27107-5450
Tel: [phone] Fax: [phone]
Data subject to change without notice