Ailunce HA1G User manual

Ailunce HA1G IP67 Waterproof GMRS
Radio
Operating Manual
Important Attentions

Before using the Ailunce HA1G, please read the manual which contains important
operating instructions for safe usage, RF Energy Awareness, control information, and
operational instructions for compliance with RF Energy Exposure limits in applicable
national and international standards.
Content
Overview----
Unpacking and Checking Equipment----
Battery Attentions----
Familiar with Radio----
Features Summary-----
Basic Operations-----
Menu Operations----
Specifications----
Fault Emission-----
FCC Information----
Overview
HA1G is the first GMRS radio of Ailunce brand, and is designed for GMRS radio fans. Ailunce
HA1G IP67 waterproof GMRS two way radio, GMRS repeater capable, Type-C charging,
2800mAh long standby two way radio.
Unpacking and Checking Equipment
Please check the packing box of this product and see if there is any sign of damage.
Please open the packing box carefully,we recommend that you identify the items listed in the
following packing list. If you find that our product and its accessories in hand are lost or damaged
during the shipment, please immediately contact dealers.
What’s in the Box?
This radio comes with the following items in the box:
Radio Body

2800mAh Lithium-Ion battery pack
TYPE-C USB Charging Cable
Belt clip
Charging Base
User Manual
Battery Attentions
The battery is not completely charged at the factory, please charge it before using it. To extend the
battery lifetime, please turn off the radio when you don't use it, and save it in a cool (temperature
around 25℃ ) and dry place.
Battery Attentions
Misuse of Li-ion batteries may result in the following hazards: smoke, fire, or the rupture of the
battery. Misuse can also cause damage to the battery or degradation of the battery’s performance.
1. NEVER use the incinerated battery packs. Internal battery gas may cause an explosion.
2. NEVER strike or use other ways to impact the battery pack. Do not use the battery pack if it has
severely impacted or dropped, or subjected to heavy pressure. Battery pack damage may not be
visible on the outside of the case. Even if the surface of the battery does not show cracks or any
other damage, the cells inside the battery may rupture or fire.
3. DANGER! NEVER leave the battery pack in places with temperatures above 60˚C (140˚F). A
high-temperature buildup in the battery cellsmay cause the battery cells to rupture or catch fire,
such as near fires or stoves, inside a sun-heated vehicle, or in direct sunlight for long periods of
time. Excessive temperatures may also degrade the pack’s performance or shorten the battery
cell’s life.
4. NEVER place the battery packs near a fire. Fire or heat may cause them rupture or explode.
Dispose of used battery packs in accordance with local regulations.
5. NEVER solder the battery terminals, or modify the battery pack. This may cause heat
generation, and the battery may burst, emit smoke or fire.
6. NEVER let fluid from inside the battery get in your eyes. This can cause blindness. Rinse your
eyes with clean water, without rubbing them, and immediately go to a doctor.
7. NEVER use the deteriorated battery packs, which could cause a fire.
8. NEVER let fluid from inside the battery cells come in contact with your body. If it does,
immediately wash with clean water.
9. NEVER put the battery packs in a microwave oven, high-pressure container, or in an induction
heating cooker. This could cause a fire, overheating, or cause the battery cells rupture.
10. CAUTION: DO NOT expose the battery packs to rain, snow, salt water, or any other liquids.
Do not charge or use a wet battery pack. If the battery pack gets wet, be sure to wipe it dry cloth
before using it.
11. DO NOT use the battery if it emits an abnormal odor, heats, or is discolored or deformed. If
any of these conditions occurs, contact your Ailunce dealer or distributor.
12. DO NOT use the battery pack out of the specified temperature range –10˚C ~ +45˚C. Using
the pack out of this range will reduce the battery pack’s performance and affect the battery cell
life.

13. DO NOT leave the battery pack fully charged, completely discharged, or in an excessive
temperature environment (above 50˚C, 122˚F) for an extended period of time. Otherwise, the
service life of the battery will be reduced. If the battery pack is left unused for a long time, it must
be detached from the transceiver after discharging.
Charging Attentions
1. DANGER! NEVER charge the battery pack in areas with extremely high temperatures, such as
near fires or stoves, inside a sun-heated vehicle, or in direct sunlight. In such environments, the
safety/protection circuit in the battery pack will be activated andthe charging will be stopped.
2. NEVER charge the transceiver during a lightning storm. It may result in an electric shock, a fire,
or damage to the transceiver. Disconnect the power adapter before a storm.
3. NEVER charge or leave the battery in the battery charger beyond 8 hours for charging. If the
battery pack is not completely charged during the specified time, stop charging and remove it from
the battery charger. Continuing to charge the battery pack beyond the specified time limit may
cause a fire, overheats, or the battery may rupture.
4. Occasionally observe the battery pack condition while charging. If any abnormal condition
occurs, stop using the battery pack.
5. DO NOT insert the transceiver with the battery pack attached to the charger if it is wet or
soiled. This could corrode the battery charger terminal or damage the charger. The charger is not
waterproof.
6. DO NOT charge the battery pack out of the specified temperature range: 10˚C ~ 40˚C (32˚F ~
104˚F). Ailunce recommends charging the pack at 25˚C (77˚F). The battery pack may overheat or
rupture if charged out of the specified temperature range. Additionally, the battery performance or
the battery life may be reduced.
Charging Operations
1.Insert the power adapter into the power supply socket.
2. Insert the output terminal of the power adapter into the DC jack behind the charging kit.
3. Insert the battery or radio equipped with the battery into the charging kit.
4. Confirm the battery and charging kit terminal contact reliably, when the charging indicator turns
red and charging starts.
5. After completing charging (charging about 7 hours), the indicator turns green.
Attachment Installment
1. Install the Battery
Match the grooves of the battery pack with the corresponding guides on the back of the transceiver,
and then push it. Press the battery and radio firmly together until the release latch on the top of the
radio locks.After hearing a "click" sound, the battery was locked.
To remove the battery, make sure the radio has been turned off, then slide up the release latch and
remove the pack away from the radio.

2. Install / Uninstall the Belt Clip

Place the belt clip to the corresponding grooves on the back of the radio, and then screw it if need.
Anticlockwise turn screws to remove the belt clip.
Feature Summary
30 GMRS Channels
Up to 250 Custom Channels
NOAA weather Channels
NOAA weather alerts
FM Radio
Standard CTCSS/DCS Tones
SupportSplitting CTCSS/DCS Tone
Selectable High/Low TX Power
Channel Scan/Priority Scan
Selectable Wide/Narrow Bandwidth
1.77 Color Backlight LCD Dual Display
Channel Name, Number or Frequency Display
Backlight Keypad
Busy Channel Lockout

Low Battery Alert
2 Programmable Function Keys
IP67 Waterproof
2800mAhType-C Charging battery
Familiar with Radio
1. Parts of the radio

2. Menu Icon Display

NO.
Icon Description
1
Signal bar;
2
Speaker
3
Lock
4
Earpiece
5
Scan
6
Monitor
7
Emergency
8
FM broadcast radio
9
NOAA
10
Charging
11
battery indicator
12
channel number in the zone
13
zone number
14
Frequency, CH number, CH name display;
15
CH number
16
VOX on
17
TA/FI：Talk around/ Reverse frequency
18
CTCSS Tone Type
19
TX Power
20
Shift Direction +/-
21
Bandwidth

3. Custom Side-Key Function
You can custom set below functions on the radio: High/Low power, turn on/off scan, FM radio,
VOX, Zone +/ -, Sub PTT;
4. Key Function Instruction
Menu
Menu/ Confirm button
Exit
Exit menu; Long press [Exit] switch MR/VFO mode.
Up/Down
up/down through channels and menu settings; When scanning change the scan
direction.
[*scan]
Long press start scan; short press switch BandA/B;
[0SQL]
Quickly enter squelch level setting.
[#Lock]
Short press to switch Single/Dual band.
Long press the key lock and unlock.
Menu Operations
Radio Setting
1. Display Mode
You can choose to display channel frequency, channel name or CH number.
1) Press the MENU key to enter the setting interface.
2) Press the UP key or DOWN key to choose: frequency, name or channel.
3) Press the MENU key to save and exit.

2. Band Setting
Here choose displays, single band or dual band.
1) Press Menu to enter Band Set.
2) Up and Down keys to choose Band A or Band B.
3) If stop at BandA, press the menu Key to choose and cancel this choice.
3. Backlight Setting
Set the backlight brightness and backlight time. The backlight time is set in steps of
5S, and the maximum backlight time is 1 hour. If the backlight time is 0, the backlight
is always on.
1) Switch channel knob to adjust the brightness level. Counterclockwise turn the
channel knob to darken the screen, clockwise will bright the screen.
2) Press up and down key to adjust the bright time.
4. Key Function
1) Key Lock mode. Choose Auto or manually to lock the radio.
2) Key Lock Setting. In order to prevent accidental frequency change or
inadvertent transmission. Various aspects of the radio's keys and switches may be
locked out. You can choose to lock keyboard, channel knob, or side-key, or to
lock all of them.
3) Key Function
Long/Short custom side-key function of the TK key, SK1, SK2.
Selective custom function is totally 13: power switch, squelch, monitor, scan, zone+/-,
FM radio, talk around, reverse frequency, turn on/off emergency alarm, programmable
PTT, optional signaling code.
Up and down key to choose the custom function, press Menu key to select the
function.
5. Audio
1) Audio Enable.
Here choose Transmit permit tone, key beep and Voice broadcast. Up and down key to
choose tones, press Menu to confirm. If voice broadcast is enabled, and the radio is
low power, it will broadcast ―Low voltage‖.
2) Mic Gain.
Press menu to enter mic gain setting, up and down key to choose Normal, Strengthen,
and low mic gain.
6. VOX
The VOX function provides automatic transmit/receive switching based on voice
input to the microphone. With the VOX switch ON, you do not need to press the PTT
switch in order to transmit.
1) Turn the channel knob to adjust the VOX thresh level 1-15.
2) Up or down key to VOX delay time setting.

3) Turn channel knob to set the VOX delay time. The maximum delay time can be
set to 2000ms.
7. Power Save
this feature significantly reduces quiescent battery drain, and you may notreceive the
full data burst.
1) Turn channel knob to choose power save mode None,1:4,1:6,1:8;
default is 1:4.
2) Up and down key to power save delay setting. Then turn channel knob to adjust
the delay time.
8. Menu Setting
If no operations in the regulation time, the radio will automatically exit the menu
and return to the standby interface. Switch the channel to know to set the exit
time.The longest set time is 255s, 0 means no limited.
9. Radio Information
It will display the radio Model, software or H/W version.
Zone Setting
This radio supports 16 zones, and every 16 channels in a zone. Default display 2
zones and all channels options.
1) All channels means it will list all the channels you create on this radio.
2) Zone-1 including channel 1 to 16. Zone-2 default including channel 17-30.
3) Up and down key to choose display all channels, or zone-1, and zone-2.
4) Press menu to select this zone or edit the channels in the zone.
5) Press menu again to confirm the choice.
Channel setting
Default set 2 VFO receiving channels and 30 GMRS channels. Up and down key to
choose the destination channel, then you can set the channel details.
1) Channel Alias.
①Name the channel via below keyboard setting, for example, press 【2TXP】
key more times to choose 2, A, B,C a, b, c; press menu key to save the channel name

and When the cursor moves to the last character, press [EXIT] to delete the characters.
2) Bandwidth
You can choose the bandwidth for the current channel, default Wide for channel 1-7
and 15-30 GMRS channels, and you can change to bandwidth for these channels.
Default unchangeable Narrow for 8-14 GMRS channels.
3) RX Frequency.
The frequency range can be input: 136-174MHz and 400-480MHz,
If out of range, the radio will automatically back to the default GMRS channel
frequency.
4) TX frequency. Same operation of RX frequency. But it will prohibit transmitting
on frequency out of range GMRS frequency.
5) CTCSS/CDC: Receiving and transmitting CTCSS/DCS set respectively.
①Up and down key to choose set RX or TX CTCSS CTCSS/DCS.
②Short press [#lock] to quickly choose the CTCSS/DCS types.
③Switch the channel knob to adjust the CTCSS/DCS values.
Below are the CTCSS/DCS tones table.
CTCSS TONE FREQUENCY (Hz)
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8

123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
DCS CODE
023
074
172
265
371
503
662
025
114
174
266
411
506
664
026
115
205
271
412
516
703
031
116
212
274
413
523
712
032
122
223
306
423
526
723
036
125
225
311
431
532
731
043
131
226
315
432
546
732
047
132
243
325
445
565
734
050
134
244
331
446
606
743
051
143
245
332
452
612
754
053
145
246
343
454
624
054
152
251
346
455
627
065
155
252
351
462
631
071
156
255
356
464
632
072
162
261
364
465
645
073
165
263
365
466
654
6) Squelch level.
The Squelch system allows you to mute the background noise when no signal is being
received. Not only does the Squelch system's ―standby‖ operation more pleasant, but
it also significantly reduces battery current consumption.
Press menu key to enter the Squelch setting, rotate the channel knob to set the squelch
level. Default is 5.
7) TX Power.

Set current channel transmit power, default high power for channel 1-7 and 15-30,
default low power for channel 8-14.
8) TX Permission Set
Set the transmit permission and transmit time and timer.
In this menu, rotate the channel knob to adjust the TOT time.
Press up and down key to choose the transmit permission options: CTC/CDC
Match,Channel free,Receive only,Always allow.
9) Signaling System
Choose a signaling list for the current channel. The content of the signaling list can be
set in the signaling menu.
10) Scan List
Choose a scan list for this current channel. Set the scan list in the scan menu.
11) Emergency List
Choose a emergency list for the current channel. Set the emergency list in the
Emergency menu.
12) Talk around
Enable this feature to Talk-ground the repeater frequency.
13) VOX Enable
Enable VOV function for the current channel. Press menu to select the VOX, and then
confirm.
Scan setting
Press menu key enter the scan setting menu.
①Scan list Alias. When the cursor is behind a character, press [EXIT] to delete
the character.
②Scan Condition. Select the scan condition carrier or CTCSS/DCS match.
③Scan mode. Select the scan mode: Carrier, Time, Search.
④TX Mode set: Choose Selected, Last Active channel, Designated Channel.
⑤Designated Channel Select: if scan a signal, it will transmit from this design
channel.
⑥Priority Channel 1: Choose a priority scan channel.
⑦Priority channel 2: choose the second priority scan channel.
⑧Channel List: Add the scanned channels in the list, then it will scan
according to these channels.

⑨Hang time：Set the hang time if the scan carrier disappear. Rotate the channel
knob to adjust the time.
Signaling
1) Common Setting.
PTT ID setting.
①Up and down key to set the PTT ID type, Side tone, BOT and EOT.
②Type: Rotate the channel knob to choose PTT ID types: All,BOT,EOT;
Rotate the channel knob to choose one of the types.
③BOT and EOT: means transmit the PTT ID begin of the transmit or end of
the transmit. Edit the PTT ID via number keys.
Decode Setting
①Up and down key to choose set Disable ID, Revive ID,Call ID, Stun type,
Show ANI.
②Edit the decode ID via number keys.
The character range is: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, *, #]\
2) DTMF Signal
DTMF system:
①System Alias.
Same operation with the channel Alias. When the cursor is behind a character,
press [EXIT] to delete the character.
②"DTMF Signaling", default code squelch.
③DTMF Group Code, Rotate the channel Knob to select the group code (0FF,
A, B, C, D, *, #)
④DTMF code length,Rotate the channel Knob to set the code time length.
⑤Fast Call Lists. DTMF signaling code in the list can be transmitted directly.
Here need to set the fast call list in the CPS.
⑥Encode & Decode
Encode and Decode Enabled options. Press 【MENU】to choose or cancel encode

or decode.
⑦Default 4 DTMF systems list on the radio.
Emergency
①Emergency System Alias
Named emergency system same operation with the channel Alias. When the
cursor is behind a character, press [EXIT] to delete the character.
②Alarm Type. choose the emergency call type:
Siren Only: Only alarm sound, will not transmit.
Regular: The radio transmits an alarm signal and provides audio that it is in
Emergency mode.
Silent: The radio transmits an alarm signal but gives no audio.
Silent w/Voice: The radio transmits an alarm signal but gives no audio that it is in
Emergency mode.
Up and down key to choose the emergency type, Menu key to confirm.
③Alarm Mode
Emergency alarm: After the emergency alarm is activated, the radio only provides
the alarm sound.
Emergency with call: no alarm tone will be sent, and the MIC will be turned on to
transmit.
Emergency Alarm w/call: After the alarm is activated, the host will send an
emergency call with an emergency alarm sound.
Up and Down key to choose the emergency modes.Menu key to confirm.
④Alarm Revert Channel: Choose the channel to transmit the emergency call.
⑤Attribute Setting: default local alarm enabled.
Call Tone
There have 10 call tones to choose. When in standby, long press [6TONE] to send a
automatically call to the receiver.
Weather Setting
1. Weather Alarm. Press [MENU] to enter the menu to turn on or off Weather
Alarm.

2. NOAA Channel List. Up and down to choose the NOAA channel, and press
[MENU] to confirm select this channel, and check the NOAAchannel info.
FM Radio
The receiving frequency range of the FM radio is 76~108 MHz.
Shortly press the Up key or Down key to increase the receiving frequency by
2MHz.Rotate the Channel knob to increase the receiving frequency by 0.1MHz.
Long press the Up key or Down key to search channels automatically, after finding
the channel, it will automatically switch to the receiving frequency.
Factory Reset
A factory data reset erases your data from the radio.
Press 【MENU】enter the main menu, and then up and down key to Factory Reset
Menu. Press 【MENU】three times confirm to do factory reset.
DETAILED FUNCTION DESCRIPTIONS
1. Power On Password setting.
Set the power on or read/write a password via CPS.
If forget the password, please contact the dealer to reset the data.
2. Channel and Zone
This GMRS radio supports to create 256 channels and supports 16 zones, 16 channels
per zone. Also, there is a ― All Channel‖ . If you choose ―All channel‖ the radio will
display all the channels you create. Default isAll Channel.
3. Scan Function Use
First make sure that there is at least one scan list, if not, create one on the CPS
software.
①According to the scan list settings, set the scan condition, choose scan mode
and Designed transmit channel.
②Create and save the channels in the scan list.
③Go to Channel Setting>>Scan List>> choose a scan list for current channel.

④Under CH mode, Long press [*SCAN] button will start scanning the
channels in the current scan list. But firstly, these channels need to add this scan list in
the channel setting.
⑤Under VFO mode, long press [*scan] button will start scanning the
frequency according to the frequency step. Press up and down key to change the
scanning direction.
4. CTCSS/DCS scanning
Under the VFO and CH mode without a CTCSS tone, long press the [1CTC] button
enter the RX CTCSS/DCS setting menu, short press [*scan] will begin scanning the
transmitting radio CTCSS/DCS. Press [MENU] key to save the scanned receiving
CTCSS/DCS.
5. Emergency system setting
①Enter the emergency system menu to set the emergency settings: emergency
system name, emergency type, emergency mode and transmit back channel.
②Go to channel setting menu >>Emergency List >> add current channel in a
Emergency list. If no emergency list added in this channel, it will not transmits an
alarm sound.
③Go to menu Radio Setting>>Key Function>>Set a custom key to Emergency
start or stop. Default TK Short press to start the emergency alarm, TK Long press to
stop the emergency alarm.
6. VOX Function
①VOX function only works for the current channel.
②Go to menu Channel Setting>>VOX Enable>>Enable or disable the VOX
for the current channel.
③Go to menu Radio Setting>>VOX>>Thresh to set the VOX sensitivity level.
Delay to set the VOX transmit delay time.
7. Dual Standby
①Short press [#LOCK] to switch single band or dual band.
②Radio Setting>>Band Setting>>Select Band Aor Band B.

8. DTMF
1. DTMF decoding
①Press [MENU] to enter Signal Decode setting.
②Stun Type：If choose Stun Rx, means you allow others to disable your radio
receiving with the Stun ID, and you can still transmit. If choose Stun TX/RX, means
you allow others to disable your radio transmitting and receiving with the Stun ID,
then you cant transmit and receive.
③Revive ID: With this ID, you allow others to revive your radio after the radio
is killed by others' radio.
Call ID: The radio identification code. The transmitter need to know this code and
then transmit the DTMF signaling.
Show ANI: Rotate the channel knob to show the ANI ID or not.
2. DTMF encoding
①Press [MENU] to enter the DTMF System setting.
②Create the Fast Call List in the programming software.
③Choose the fast call list, press [MENU] to call out the DTMF call.
3. PTT ID
①PTT ID is the function to transmit an identification code when making a call.
A user can view the caller’s ID with the received PTT ID if choose show ANI ID.
②PTT ID Type:
PTT ID Type
Description